| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow
Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16
DACL size overflow") added check_add_overflow() guards that break out
of the ACE-building loops in set_posix_acl_entries_dacl() when the
accumulated DACL size would wrap past 65535.
However, each iteration allocates a struct smb_sid via kmalloc_obj()
at the top of the loop and relies on the kfree(sid) call at the end
of the loop body (the 'pass_same_sid' label in the first loop, and
the explicit kfree at the tail of the second loop) to release it.
The newly introduced 'break' statements bypass those kfree() calls,
leaking the sid buffer every time an overflow is detected.
A malicious or malformed file with enough POSIX ACL entries to trip
the overflow check will leak one or more struct smb_sid allocations
on every request that touches the file's DACL, providing a trivial
kernel memory exhaustion vector.
Free sid before breaking out of the loops to plug the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in proc_show_files()
When a SMB2 client opens a file with a durable v2 handle and then issues
SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the
reconnectable file pointer but leaves the fp registered in global_ft.idr
until the durable scavenger fires (up to fp->durable_timeout seconds
later).
During that window any read of /proc/fs/ksmbd/files (mode 0400) panics
the kernel because proc_show_files() walks global_ft.idr and
unconditionally dereferences fp->tcon->id with no NULL guard.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:proc_show_files+0x118/0x740
Call Trace:
proc_show_files+0x118/0x740
seq_read_iter+0x4ef/0xe10
proc_reg_read_iter+0x1b7/0x280
...
Guard the dereference. A durable-disconnected fp legitimately has no
tcon; report its tree id as 0 rather than oopsing. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in compare_guid_key()
session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: resample the data fork mapping after cycling ILOCK
xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode,
a data fork mapping, and a cow fork mapping. Unfortunately, these two
helpers cycle the ILOCK to grab a transaction, which means that the
mappings are stale as soon as we reacquire the ILOCK. Currently we
refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but
we don't refresh the data fork mapping beforehand, which means that the
xfs_bmap_trim_cow in that function queries the refcount btree about the
wrong physical blocks and returns an inaccurate value in *shared.
If *shared is now false, the directio write proceeds with a stale data
fork mapping. Fix this by querying the data fork mapping if the
sequence counter changes across the ILOCK cycle. |
| Impact:
The fix for CVE-2021-23337 (https://github.com/advisories/GHSA-35jh-r3h4-6jhm) added validation for the variable option in _.template but did not apply the same validation to options.imports key names. Both paths flow into the same Function() constructor sink.
When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time.
Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in. If Object.prototype has been polluted by any other vector, the polluted keys are copied into the imports object and passed to Function().
Patches:
Users should upgrade to version 4.18.0.
Workarounds:
Do not pass untrusted input as key names in options.imports. Only use developer-controlled, static key names. |
| When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool. |
| If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3. |
| During chain building, the amount of work that is done is not correctly limited when a large number of intermediate certificates are passed in VerifyOptions.Intermediates, which can lead to a denial of service. This affects both direct users of crypto/x509 and users of crypto/tls. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix RxGK token loading to check bounds
rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length
from the XDR token as u32 values and passes each through round_up(x, 4)
before using the rounded value for validation and allocation. When the raw
length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and
kzalloc both use 0 while the subsequent memcpy still copies the original
~4 GiB value, producing a heap buffer overflow reachable from an
unprivileged add_key() call.
Fix this by:
(1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket
lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with
the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX.
(2) Sizing the flexible-array allocation from the validated raw key
length via struct_size_t() instead of the rounded value.
(3) Caching the raw lengths so that the later field assignments and
memcpy calls do not re-read from the token, eliminating a class of
TOCTOU re-parse.
The control path (valid token with lengths within bounds) is unaffected. |
| A vulnerability was identified in code-projects Task Management System 1.0. This affects the function Operation::select_with_multiple_condition of the file /index.php of the component Login Form. Such manipulation of the argument email leads to sql injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
| IBM Storage Scale 5.2.3.0 through 5.2.3.8, and 6.0.0.0 through 6.0.1.0 Secrets may be disclosed in log files in IBM Storage Scale Management GUI The admin password is logged into the GUI log of IBM Storage Scale Systems Deploy and Upgrade from GUI. Secrets may be disclosed in information related to exceptions in IBM Storage Scale Management GUI. |
| Heap-based buffer overflow in Windows DNS allows an authorized attacker to elevate privileges locally. |
| Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in ninenines cowlib allows HTTP request splitting and cookie smuggling via unvalidated cookie name and value fields.
cow_cookie:cookie/1 in cowlib builds a client-side Cookie: request header from a list of name-value pairs without validating either field. An attacker who controls the cookie names or values passed to this function can inject ;, ,, CR, LF, or TAB characters into the serialized header. This enables two classes of attack: cookie smuggling within a single header (e.g. injecting ; admin=1 to introduce a phantom cookie that the receiving server treats as authentic) and HTTP request header splitting (injecting CRLF to append arbitrary headers or smuggle a complete second request against a shared upstream proxy). The decoder side (parse_cookie_name/1, parse_cookie_value/1) and setcookie/3 already validate and reject these characters; the encoder alone is missing the check.
This issue affects cowlib: from 2.9.0 onward. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in AKIN Software Computer Import Export Industry and Trade Ltd. AKINSOFT Wolvox9 ERP / KontrolPanel.exe allows Path Traversal.
This issue affects AKINSOFT Wolvox9 ERP / KontrolPanel.exe: from s26.02.17 before 26.02.22. |
| DOMPurify before 3.4.13 contains a cross-site scripting vulnerability in IN_PLACE sanitization where element-removal hooks fail to neutralize detached subtrees. Attackers can supply HTML with event handlers on descendant elements that execute after sanitization completes, even though the returned root appears clean. |
| Grav before 2.0.14 contains a stored cross-site scripting vulnerability in the Security::detectXss() function (system/src/Grav/Common/Security.php). All XSS detection patterns use the PCRE /u (UTF-8) modifier, so a single invalid UTF-8 byte anywhere in page content causes preg_match() to return false for every pattern, silently bypassing the save-time XSS safety gate (Validation::checkSafety()). An authenticated attacker with page-edit permissions (without the security.xss_whitelist privilege) can store malicious JavaScript that executes in the browser of a visitor who views the affected page. |
| grav-plugin-api versions before 1.0.15 fail to validate Twig content in the translate() endpoint, allowing attackers with api.pages.write permission to persist pages with process.twig enabled. Attackers can submit crafted header and content parameters to execute server-side template injection payloads that are evaluated at render time. |
| SiYuan before v3.7.4 contains a cross-site scripting vulnerability in the file upload validation flow that fails to escape filenames before inserting them into HTML via insertAdjacentHTML. Attackers can craft a malicious filename containing script payloads that execute with full OS command access when a user drags, drops, or pastes the file into the editor. |
| phpMyFAQ before 4.1.6 contains a privilege escalation vulnerability in GroupController::updateMembers() that allows administrators with only group-management permissions to join privileged groups without verification of required rights. Attackers can add themselves to pre-existing groups holding user-management rights and immediately inherit those permissions to modify or delete user accounts. |
| A flaw was found in the group policy provider of Keycloak authorization services, which is used to manage fine-grained access control to resources. The issue occurs when the system evaluates group-based policies using tokens that only contain group names rather than full paths. If two groups in different parts of the organization share the same name, a user in the unauthorized group can be mistaken for a member of the authorized group. This can allow a user to gain unauthorized access to protected resources they should not be able to reach. |
