| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inline.c:258!
CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0
RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258
Call Trace:
f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834
f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3288 [inline]
f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315
do_writepages+0x35b/0x870 mm/page-writeback.c:2612
__writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650
writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941
wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117
wb_do_writeback fs/fs-writeback.c:2264 [inline]
wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f2/0x390 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
The root cause is: inline_data inode can be fuzzed, so that there may
be valid blkaddr in its direct node, once f2fs triggers background GC
to migrate the block, it will hit f2fs_bug_on() during dirty page
writeback.
Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC,
so that, it can forbid migrating inline_data inode's data block for
fixing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Refactor DMCUB enter/exit idle interface
[Why]
We can hang in place trying to send commands when the DMCUB isn't
powered on.
[How]
We need to exit out of the idle state prior to sending a command,
but the process that performs the exit also invokes a command itself.
Fixing this issue involves the following:
1. Using a software state to track whether or not we need to start
the process to exit idle or notify idle.
It's possible for the hardware to have exited an idle state without
driver knowledge, but entering one is always restricted to a driver
allow - which makes the SW state vs HW state mismatch issue purely one
of optimization, which should seldomly be hit, if at all.
2. Refactor any instances of exit/notify idle to use a single wrapper
that maintains this SW state.
This works simialr to dc_allow_idle_optimizations, but works at the
DMCUB level and makes sure the state is marked prior to any notify/exit
idle so we don't enter an infinite loop.
3. Make sure we exit out of idle prior to sending any commands or
waiting for DMCUB idle.
This patch takes care of 1/2. A future patch will take care of wrapping
DMCUB command submission with calls to this new interface. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wake DMCUB before executing GPINT commands
[Why]
DMCUB can be in idle when we attempt to interface with the HW through
the GPINT mailbox resulting in a system hang.
[How]
Add dc_wake_and_execute_gpint() to wrap the wake, execute, sleep
sequence.
If the GPINT executes successfully then DMCUB will be put back into
sleep after the optional response is returned.
It functions similar to the inbox command interface. |
| A vulnerability, which was classified as problematic, was found in xxyopen/201206030 novel-plus up to 5.1.3. This affects the function remove of the file novel-admin/src/main/java/com/java2nb/common/controller/FileController.java of the component File Handler. The manipulation leads to improper control of resource identifiers. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
block: Fix wrong offset in bio_truncate()
bio_truncate() clears the buffer outside of last block of bdev, however
current bio_truncate() is using the wrong offset of page. So it can
return the uninitialized data.
This happened when both of truncated/corrupted FS and userspace (via
bdev) are trying to read the last of bdev. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fixed bug on error when unloading amdgpu
Fixed bug on error when unloading amdgpu.
The error message is as follows:
[ 377.706202] kernel BUG at drivers/gpu/drm/drm_buddy.c:278!
[ 377.706215] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 377.706222] CPU: 4 PID: 8610 Comm: modprobe Tainted: G IOE 6.0.0-thomas #1
[ 377.706231] Hardware name: ASUS System Product Name/PRIME Z390-A, BIOS 2004 11/02/2021
[ 377.706238] RIP: 0010:drm_buddy_free_block+0x26/0x30 [drm_buddy]
[ 377.706264] Code: 00 00 00 90 0f 1f 44 00 00 48 8b 0e 89 c8 25 00 0c 00 00 3d 00 04 00 00 75 10 48 8b 47 18 48 d3 e0 48 01 47 28 e9 fa fe ff ff <0f> 0b 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 48 89 f5 53
[ 377.706282] RSP: 0018:ffffad2dc4683cb8 EFLAGS: 00010287
[ 377.706289] RAX: 0000000000000000 RBX: ffff8b1743bd5138 RCX: 0000000000000000
[ 377.706297] RDX: ffff8b1743bd5160 RSI: ffff8b1743bd5c78 RDI: ffff8b16d1b25f70
[ 377.706304] RBP: ffff8b1743bd59e0 R08: 0000000000000001 R09: 0000000000000001
[ 377.706311] R10: ffff8b16c8572400 R11: ffffad2dc4683cf0 R12: ffff8b16d1b25f70
[ 377.706318] R13: ffff8b16d1b25fd0 R14: ffff8b1743bd59c0 R15: ffff8b16d1b25f70
[ 377.706325] FS: 00007fec56c72c40(0000) GS:ffff8b1836500000(0000) knlGS:0000000000000000
[ 377.706334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 377.706340] CR2: 00007f9b88c1ba50 CR3: 0000000110450004 CR4: 00000000003706e0
[ 377.706347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 377.706354] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 377.706361] Call Trace:
[ 377.706365] <TASK>
[ 377.706369] drm_buddy_free_list+0x2a/0x60 [drm_buddy]
[ 377.706376] amdgpu_vram_mgr_fini+0xea/0x180 [amdgpu]
[ 377.706572] amdgpu_ttm_fini+0x12e/0x1a0 [amdgpu]
[ 377.706650] amdgpu_bo_fini+0x22/0x90 [amdgpu]
[ 377.706727] gmc_v11_0_sw_fini+0x26/0x30 [amdgpu]
[ 377.706821] amdgpu_device_fini_sw+0xa1/0x3c0 [amdgpu]
[ 377.706897] amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
[ 377.706975] drm_dev_release+0x20/0x40 [drm]
[ 377.707006] release_nodes+0x35/0xb0
[ 377.707014] devres_release_all+0x8b/0xc0
[ 377.707020] device_unbind_cleanup+0xe/0x70
[ 377.707027] device_release_driver_internal+0xee/0x160
[ 377.707033] driver_detach+0x44/0x90
[ 377.707039] bus_remove_driver+0x55/0xe0
[ 377.707045] pci_unregister_driver+0x3b/0x90
[ 377.707052] amdgpu_exit+0x11/0x6c [amdgpu]
[ 377.707194] __x64_sys_delete_module+0x142/0x2b0
[ 377.707201] ? fpregs_assert_state_consistent+0x22/0x50
[ 377.707208] ? exit_to_user_mode_prepare+0x3e/0x190
[ 377.707215] do_syscall_64+0x38/0x90
[ 377.707221] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU.
Mirrors the logic for dcn30. Cue lots of WARNs and some
kernel panics without this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Disable kvmclock on all CPUs on shutdown
Currenly, we disable kvmclock from machine_shutdown() hook and this
only happens for boot CPU. We need to disable it for all CPUs to
guard against memory corruption e.g. on restore from hibernate.
Note, writing '0' to kvmclock MSR doesn't clear memory location, it
just prevents hypervisor from updating the location so for the short
while after write and while CPU is still alive, the clock remains usable
and correct so we don't need to switch to some other clocksource. |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: remove separate irq request for MSI and INTx
When using MSI or INTx interrupts, request_irq() for pdev->irq will
conflict with request_threaded_irq() for txgbe->misc.irq, to cause
system crash. So remove txgbe_request_irq() for MSI/INTx case, and
rename txgbe_request_msix_irqs() since it only request for queue irqs.
Add wx->misc_irq_domain to determine whether the driver creates an IRQ
domain and threaded request the IRQs. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential bug in end_buffer_async_write
According to a syzbot report, end_buffer_async_write(), which handles the
completion of block device writes, may detect abnormal condition of the
buffer async_write flag and cause a BUG_ON failure when using nilfs2.
Nilfs2 itself does not use end_buffer_async_write(). But, the async_write
flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue
with race condition of competition between segments for dirty blocks") as
a means of resolving double list insertion of dirty blocks in
nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the
resulting crash.
This modification is safe as long as it is used for file data and b-tree
node blocks where the page caches are independent. However, it was
irrelevant and redundant to also introduce async_write for segment summary
and super root blocks that share buffers with the backing device. This
led to the possibility that the BUG_ON check in end_buffer_async_write
would fail as described above, if independent writebacks of the backing
device occurred in parallel.
The use of async_write for segment summary buffers has already been
removed in a previous change.
Fix this issue by removing the manipulation of the async_write flag for
the remaining super root block buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: Remove LED entry from LEDs list on unregister
Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct
ordering") correctly fixed a problem with using devm_ but missed
removing the LED entry from the LEDs list.
This cause kernel panic on specific scenario where the port for the PHY
is torn down and up and the kmod for the PHY is removed.
On setting the port down the first time, the assosiacted LEDs are
correctly unregistered. The associated kmod for the PHY is now removed.
The kmod is now added again and the port is now put up, the associated LED
are registered again.
On putting the port down again for the second time after these step, the
LED list now have 4 elements. With the first 2 already unregistered
previously and the 2 new one registered again.
This cause a kernel panic as the first 2 element should have been
removed.
Fix this by correctly removing the element when LED is unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940.
Kevin reported that this causes a crash during suspend on platforms that
dont use PM domains. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Disable preemption while updating GPU stats
We forgot to disable preemption around the write_seqcount_begin/end() pair
while updating GPU stats:
[ ] WARNING: CPU: 2 PID: 12 at include/linux/seqlock.h:221 __seqprop_assert.isra.0+0x128/0x150 [v3d]
[ ] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
<...snip...>
[ ] Call trace:
[ ] __seqprop_assert.isra.0+0x128/0x150 [v3d]
[ ] v3d_job_start_stats.isra.0+0x90/0x218 [v3d]
[ ] v3d_bin_job_run+0x23c/0x388 [v3d]
[ ] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched]
[ ] process_one_work+0x62c/0xb48
[ ] worker_thread+0x468/0x5b0
[ ] kthread+0x1c4/0x1e0
[ ] ret_from_fork+0x10/0x20
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZE
blk_queue_max_segment_size() ensured:
if (max_size < PAGE_SIZE)
max_size = PAGE_SIZE;
whereas:
blk_validate_limits() makes it an error:
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
The change from one to the other, exposed sdhci which was setting maximum
segment size too low in some circumstances.
Fix the maximum segment size when it is too low. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: disable PMD-sized page cache if needed
For shmem files, it's possible that PMD-sized page cache can't be
supported by xarray. For example, 512MB page cache on ARM64 when the base
page size is 64KB can't be supported by xarray. It leads to errors as the
following messages indicate when this sort of xarray entry is split.
WARNING: CPU: 34 PID: 7578 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 \
nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject \
nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \
ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse xfs \
libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_net \
net_failover virtio_console virtio_blk failover dimlib virtio_mmio
CPU: 34 PID: 7578 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : xas_split_alloc+0xf8/0x128
lr : split_huge_page_to_list_to_order+0x1c4/0x720
sp : ffff8000882af5f0
x29: ffff8000882af5f0 x28: ffff8000882af650 x27: ffff8000882af768
x26: 0000000000000cc0 x25: 000000000000000d x24: ffff00010625b858
x23: ffff8000882af650 x22: ffffffdfc0900000 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffdfc0900000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000018000000000 x15: 52f8004000000000
x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020
x11: 52f8000000000000 x10: 52f8e1c0ffff6000 x9 : ffffbeb9619a681c
x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00010b02ddb0
x5 : ffffbeb96395e378 x4 : 0000000000000000 x3 : 0000000000000cc0
x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000
Call trace:
xas_split_alloc+0xf8/0x128
split_huge_page_to_list_to_order+0x1c4/0x720
truncate_inode_partial_folio+0xdc/0x160
shmem_undo_range+0x2bc/0x6a8
shmem_fallocate+0x134/0x430
vfs_fallocate+0x124/0x2e8
ksys_fallocate+0x4c/0xa0
__arm64_sys_fallocate+0x24/0x38
invoke_syscall.constprop.0+0x7c/0xd8
do_el0_svc+0xb4/0xd0
el0_svc+0x44/0x1d8
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Fix it by disabling PMD-sized page cache when HPAGE_PMD_ORDER is larger
than MAX_PAGECACHE_ORDER. As Matthew Wilcox pointed, the page cache in a
shmem file isn't represented by a multi-index entry and doesn't have this
limitation when the xarry entry is split until commit 6b24ca4a1a8d ("mm:
Use multi-index entries in the page cache"). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fail bpf_timer_cancel when callback is being cancelled
Given a schedule:
timer1 cb timer2 cb
bpf_timer_cancel(timer2); bpf_timer_cancel(timer1);
Both bpf_timer_cancel calls would wait for the other callback to finish
executing, introducing a lockup.
Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps
track of all in-flight cancellation requests for a given BPF timer.
Whenever cancelling a BPF timer, we must check if we have outstanding
cancellation requests, and if so, we must fail the operation with an
error (-EDEADLK) since cancellation is synchronous and waits for the
callback to finish executing. This implies that we can enter a deadlock
situation involving two or more timer callbacks executing in parallel
and attempting to cancel one another.
Note that we avoid incrementing the cancelling counter for the target
timer (the one being cancelled) if bpf_timer_cancel is not invoked from
a callback, to avoid spurious errors. The whole point of detecting
cur->cancelling and returning -EDEADLK is to not enter a busy wait loop
(which may or may not lead to a lockup). This does not apply in case the
caller is in a non-callback context, the other side can continue to
cancel as it sees fit without running into errors.
Background on prior attempts:
Earlier versions of this patch used a bool 'cancelling' bit and used the
following pattern under timer->lock to publish cancellation status.
lock(t->lock);
t->cancelling = true;
mb();
if (cur->cancelling)
return -EDEADLK;
unlock(t->lock);
hrtimer_cancel(t->timer);
t->cancelling = false;
The store outside the critical section could overwrite a parallel
requests t->cancelling assignment to true, to ensure the parallely
executing callback observes its cancellation status.
It would be necessary to clear this cancelling bit once hrtimer_cancel
is done, but lack of serialization introduced races. Another option was
explored where bpf_timer_start would clear the bit when (re)starting the
timer under timer->lock. This would ensure serialized access to the
cancelling bit, but may allow it to be cleared before in-flight
hrtimer_cancel has finished executing, such that lockups can occur
again.
Thus, we choose an atomic counter to keep track of all outstanding
cancellation requests and use it to prevent lockups in case callbacks
attempt to cancel each other while executing in parallel. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Use kfree_sensitive() to fix Coccinelle warnings
Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle:
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1506)
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1643)
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1770) |
