| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix receive ring space parameters when XDP is active
The MTU setting at the time an XDP multi-buffer is attached
determines whether the aggregation ring will be used and the
rx_skb_func handler. This is done in bnxt_set_rx_skb_mode().
If the MTU is later changed, the aggregation ring setting may need
to be changed and it may become out-of-sync with the settings
initially done in bnxt_set_rx_skb_mode(). This may result in
random memory corruption and crashes as the HW may DMA data larger
than the allocated buffer size, such as:
BUG: kernel NULL pointer dereference, address: 00000000000003c0
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 17 PID: 0 Comm: swapper/17 Kdump: loaded Tainted: G S OE 6.1.0-226bf9805506 #1
Hardware name: Wiwynn Delta Lake PVT BZA.02601.0150/Delta Lake-Class1, BIOS F0E_3A12 08/26/2021
RIP: 0010:bnxt_rx_pkt+0xe97/0x1ae0 [bnxt_en]
Code: 8b 95 70 ff ff ff 4c 8b 9d 48 ff ff ff 66 41 89 87 b4 00 00 00 e9 0b f7 ff ff 0f b7 43 0a 49 8b 95 a8 04 00 00 25 ff 0f 00 00 <0f> b7 14 42 48 c1 e2 06 49 03 95 a0 04 00 00 0f b6 42 33f
RSP: 0018:ffffa19f40cc0d18 EFLAGS: 00010202
RAX: 00000000000001e0 RBX: ffff8e2c805c6100 RCX: 00000000000007ff
RDX: 0000000000000000 RSI: ffff8e2c271ab990 RDI: ffff8e2c84f12380
RBP: ffffa19f40cc0e48 R08: 000000000001000d R09: 974ea2fcddfa4cbf
R10: 0000000000000000 R11: ffffa19f40cc0ff8 R12: ffff8e2c94b58980
R13: ffff8e2c952d6600 R14: 0000000000000016 R15: ffff8e2c271ab990
FS: 0000000000000000(0000) GS:ffff8e3b3f840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000003c0 CR3: 0000000e8580a004 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
__bnxt_poll_work+0x1c2/0x3e0 [bnxt_en]
To address the issue, we now call bnxt_set_rx_skb_mode() within
bnxt_change_mtu() to properly set the AGG rings configuration and
update rx_skb_func based on the new MTU value.
Additionally, BNXT_FLAG_NO_AGG_RINGS is cleared at the beginning of
bnxt_set_rx_skb_mode() to make sure it gets set or cleared based on
the current MTU. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix possible deadlocks
This fixes possible deadlocks like the following caused by
hci_cmd_sync_dequeue causing the destroy function to run:
INFO: task kworker/u19:0:143 blocked for more than 120 seconds.
Tainted: G W O 6.8.0-2024-03-19-intel-next-iLS-24ww14 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u19:0 state:D stack:0 pid:143 tgid:143 ppid:2 flags:0x00004000
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
__schedule+0x374/0xaf0
schedule+0x3c/0xf0
schedule_preempt_disabled+0x1c/0x30
__mutex_lock.constprop.0+0x3ef/0x7a0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3c/0x50
mgmt_set_connectable_complete+0xa4/0x150 [bluetooth]
? kfree+0x211/0x2a0
hci_cmd_sync_dequeue+0xae/0x130 [bluetooth]
? __pfx_cmd_complete_rsp+0x10/0x10 [bluetooth]
cmd_complete_rsp+0x26/0x80 [bluetooth]
mgmt_pending_foreach+0x4d/0x70 [bluetooth]
__mgmt_power_off+0x8d/0x180 [bluetooth]
? _raw_spin_unlock_irq+0x23/0x40
hci_dev_close_sync+0x445/0x5b0 [bluetooth]
hci_set_powered_sync+0x149/0x250 [bluetooth]
set_powered_sync+0x24/0x60 [bluetooth]
hci_cmd_sync_work+0x90/0x150 [bluetooth]
process_one_work+0x13e/0x300
worker_thread+0x2f7/0x420
? __pfx_worker_thread+0x10/0x10
kthread+0x107/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3d/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix use-after-free of nreq in reqsk_timer_handler().
The cited commit replaced inet_csk_reqsk_queue_drop_and_put() with
__inet_csk_reqsk_queue_drop() and reqsk_put() in reqsk_timer_handler().
Then, oreq should be passed to reqsk_put() instead of req; otherwise
use-after-free of nreq could happen when reqsk is migrated but the
retry attempt failed (e.g. due to timeout).
Let's pass oreq to reqsk_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
xen: Fix the issue of resource not being properly released in xenbus_dev_probe()
This patch fixes an issue in the function xenbus_dev_probe(). In the
xenbus_dev_probe() function, within the if (err) branch at line 313, the
program incorrectly returns err directly without releasing the resources
allocated by err = drv->probe(dev, id). As the return value is non-zero,
the upper layers assume the processing logic has failed. However, the probe
operation was performed earlier without a corresponding remove operation.
Since the probe actually allocates resources, failing to perform the remove
operation could lead to problems.
To fix this issue, we followed the resource release logic of the
xenbus_dev_remove() function by adding a new block fail_remove before the
fail_put block. After entering the branch if (err) at line 313, the
function will use a goto statement to jump to the fail_remove block,
ensuring that the previously acquired resources are correctly released,
thus preventing the reference count leak.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and detecting potential issues where resources are not properly managed.
In this case, the tool flagged the missing release operation as a
potential problem, which led to the development of this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
Flexible-array member `hws` in `struct clk_hw_onecell_data` is annotated
with the `counted_by()` attribute. This means that when memory is
allocated for this array, the _counter_, which in this case is member
`num` in the flexible structure, should be set to the maximum number of
elements the flexible array can contain, or fewer.
In this case, the total number of elements for the flexible array is
determined by variable `clks_num` when allocating heap space via
`devm_kzalloc()`, as shown below:
289 struct loongson2_clk_provider *clp;
...
296 for (p = data; p->name; p++)
297 clks_num++;
298
299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num),
300 GFP_KERNEL);
So, `clp->clk_data.num` should be set to `clks_num` or less, and not
exceed `clks_num`, as is currently the case. Otherwise, if data is
written into `clp->clk_data.hws[clks_num]`, the instrumentation
provided by the compiler won't detect the overflow, leading to a
memory corruption bug at runtime.
Fix this issue by setting `clp->clk_data.num` to `clks_num`. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix crash when unbinding
If there is an error during some initialization related to firmware,
the function ath12k_dp_cc_cleanup is called to release resources.
However this is released again when the device is unbinded (ath12k_pci),
and we get:
BUG: kernel NULL pointer dereference, address: 0000000000000020
at RIP: 0010:ath12k_dp_cc_cleanup.part.0+0xb6/0x500 [ath12k]
Call Trace:
ath12k_dp_cc_cleanup
ath12k_dp_free
ath12k_core_deinit
ath12k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set to NULL the released structure in
ath12k_dp_cc_cleanup at the end. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in SMB request handling
A race condition exists between SMB request handling in
`ksmbd_conn_handler_loop()` and the freeing of `ksmbd_conn` in the
workqueue handler `handle_ksmbd_work()`. This leads to a UAF.
- KASAN: slab-use-after-free Read in handle_ksmbd_work
- KASAN: slab-use-after-free in rtlock_slowlock_locked
This race condition arises as follows:
- `ksmbd_conn_handler_loop()` waits for `conn->r_count` to reach zero:
`wait_event(conn->r_count_q, atomic_read(&conn->r_count) == 0);`
- Meanwhile, `handle_ksmbd_work()` decrements `conn->r_count` using
`atomic_dec_return(&conn->r_count)`, and if it reaches zero, calls
`ksmbd_conn_free()`, which frees `conn`.
- However, after `handle_ksmbd_work()` decrements `conn->r_count`,
it may still access `conn->r_count_q` in the following line:
`waitqueue_active(&conn->r_count_q)` or `wake_up(&conn->r_count_q)`
This results in a UAF, as `conn` has already been freed.
The discovery of this UAF can be referenced in the following PR for
syzkaller's support for SMB requests. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix NULL ptr deref in crypto_aead_setkey()
Neither SMB3.0 or SMB3.02 supports encryption negotiate context, so
when SMB2_GLOBAL_CAP_ENCRYPTION flag is set in the negotiate response,
the client uses AES-128-CCM as the default cipher. See MS-SMB2
3.3.5.4.
Commit b0abcd65ec54 ("smb: client: fix UAF in async decryption") added
a @server->cipher_type check to conditionally call
smb3_crypto_aead_allocate(), but that check would always be false as
@server->cipher_type is unset for SMB3.02.
Fix the following KASAN splat by setting @server->cipher_type for
SMB3.02 as well.
mount.cifs //srv/share /mnt -o vers=3.02,seal,...
BUG: KASAN: null-ptr-deref in crypto_aead_setkey+0x2c/0x130
Read of size 8 at addr 0000000000000020 by task mount.cifs/1095
CPU: 1 UID: 0 PID: 1095 Comm: mount.cifs Not tainted 6.12.0 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41
04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? crypto_aead_setkey+0x2c/0x130
kasan_report+0xda/0x110
? crypto_aead_setkey+0x2c/0x130
crypto_aead_setkey+0x2c/0x130
crypt_message+0x258/0xec0 [cifs]
? __asan_memset+0x23/0x50
? __pfx_crypt_message+0x10/0x10 [cifs]
? mark_lock+0xb0/0x6a0
? hlock_class+0x32/0xb0
? mark_lock+0xb0/0x6a0
smb3_init_transform_rq+0x352/0x3f0 [cifs]
? lock_acquire.part.0+0xf4/0x2a0
smb_send_rqst+0x144/0x230 [cifs]
? __pfx_smb_send_rqst+0x10/0x10 [cifs]
? hlock_class+0x32/0xb0
? smb2_setup_request+0x225/0x3a0 [cifs]
? __pfx_cifs_compound_last_callback+0x10/0x10 [cifs]
compound_send_recv+0x59b/0x1140 [cifs]
? __pfx_compound_send_recv+0x10/0x10 [cifs]
? __create_object+0x5e/0x90
? hlock_class+0x32/0xb0
? do_raw_spin_unlock+0x9a/0xf0
cifs_send_recv+0x23/0x30 [cifs]
SMB2_tcon+0x3ec/0xb30 [cifs]
? __pfx_SMB2_tcon+0x10/0x10 [cifs]
? lock_acquire.part.0+0xf4/0x2a0
? __pfx_lock_release+0x10/0x10
? do_raw_spin_trylock+0xc6/0x120
? lock_acquire+0x3f/0x90
? _get_xid+0x16/0xd0 [cifs]
? __pfx_SMB2_tcon+0x10/0x10 [cifs]
? cifs_get_smb_ses+0xcdd/0x10a0 [cifs]
cifs_get_smb_ses+0xcdd/0x10a0 [cifs]
? __pfx_cifs_get_smb_ses+0x10/0x10 [cifs]
? cifs_get_tcp_session+0xaa0/0xca0 [cifs]
cifs_mount_get_session+0x8a/0x210 [cifs]
dfs_mount_share+0x1b0/0x11d0 [cifs]
? __pfx___lock_acquire+0x10/0x10
? __pfx_dfs_mount_share+0x10/0x10 [cifs]
? lock_acquire.part.0+0xf4/0x2a0
? find_held_lock+0x8a/0xa0
? hlock_class+0x32/0xb0
? lock_release+0x203/0x5d0
cifs_mount+0xb3/0x3d0 [cifs]
? do_raw_spin_trylock+0xc6/0x120
? __pfx_cifs_mount+0x10/0x10 [cifs]
? lock_acquire+0x3f/0x90
? find_nls+0x16/0xa0
? smb3_update_mnt_flags+0x372/0x3b0 [cifs]
cifs_smb3_do_mount+0x1e2/0xc80 [cifs]
? __pfx_vfs_parse_fs_string+0x10/0x10
? __pfx_cifs_smb3_do_mount+0x10/0x10 [cifs]
smb3_get_tree+0x1bf/0x330 [cifs]
vfs_get_tree+0x4a/0x160
path_mount+0x3c1/0xfb0
? kasan_quarantine_put+0xc7/0x1d0
? __pfx_path_mount+0x10/0x10
? kmem_cache_free+0x118/0x3e0
? user_path_at+0x74/0xa0
__x64_sys_mount+0x1a6/0x1e0
? __pfx___x64_sys_mount+0x10/0x10
? mark_held_locks+0x1a/0x90
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of signing key
Customers have reported use-after-free in @ses->auth_key.response with
SMB2.1 + sign mounts which occurs due to following race:
task A task B
cifs_mount()
dfs_mount_share()
get_session()
cifs_mount_get_session() cifs_send_recv()
cifs_get_smb_ses() compound_send_recv()
cifs_setup_session() smb2_setup_request()
kfree_sensitive() smb2_calc_signature()
crypto_shash_setkey() *UAF*
Fix this by ensuring that we have a valid @ses->auth_key.response by
checking whether @ses->ses_status is SES_GOOD or SES_EXITING with
@ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF
in smb2_reconnect_server()"), we made sure to call ->logoff() only
when @ses was known to be good (e.g. valid ->auth_key.response), so
it's safe to access signing key when @ses->ses_status == SES_EXITING. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: Don't leak cfid when reconnect races with open_cached_dir
open_cached_dir() may either race with the tcon reconnection even before
compound_send_recv() or directly trigger a reconnection via
SMB2_open_init() or SMB_query_info_init().
The reconnection process invokes invalidate_all_cached_dirs() via
cifs_mark_open_files_invalid(), which removes all cfids from the
cfids->entries list but doesn't drop a ref if has_lease isn't true. This
results in the currently-being-constructed cfid not being on the list,
but still having a refcount of 2. It leaks if returned from
open_cached_dir().
Fix this by setting cfid->has_lease when the ref is actually taken; the
cfid will not be used by other threads until it has a valid time.
Addresses these kmemleaks:
unreferenced object 0xffff8881090c4000 (size 1024):
comm "bash", pid 1860, jiffies 4295126592
hex dump (first 32 bytes):
00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........".......
00 ca 45 22 81 88 ff ff f8 dc 4f 04 81 88 ff ff ..E"......O.....
backtrace (crc 6f58c20f):
[<ffffffff8b895a1e>] __kmalloc_cache_noprof+0x2be/0x350
[<ffffffff8bda06e3>] open_cached_dir+0x993/0x1fb0
[<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50
[<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0
[<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200
[<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0
[<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881044fdcf8 (size 8):
comm "bash", pid 1860, jiffies 4295126592
hex dump (first 8 bytes):
00 cc cc cc cc cc cc cc ........
backtrace (crc 10c106a9):
[<ffffffff8b89a3d3>] __kmalloc_node_track_caller_noprof+0x363/0x480
[<ffffffff8b7d7256>] kstrdup+0x36/0x60
[<ffffffff8bda0700>] open_cached_dir+0x9b0/0x1fb0
[<ffffffff8bdaa750>] cifs_readdir+0x15a0/0x1d50
[<ffffffff8b9a853f>] iterate_dir+0x28f/0x4b0
[<ffffffff8b9a9aed>] __x64_sys_getdents64+0xfd/0x200
[<ffffffff8cf6da05>] do_syscall_64+0x95/0x1a0
[<ffffffff8d00012f>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
And addresses these BUG splats when unmounting the SMB filesystem:
BUG: Dentry ffff888140590ba0{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
WARNING: CPU: 3 PID: 3433 at fs/dcache.c:1536 umount_check+0xd0/0x100
Modules linked in:
CPU: 3 UID: 0 PID: 3433 Comm: bash Not tainted 6.12.0-rc4-g850925a8133c-dirty #49
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:umount_check+0xd0/0x100
Code: 8d 7c 24 40 e8 31 5a f4 ff 49 8b 54 24 40 41 56 49 89 e9 45 89 e8 48 89 d9 41 57 48 89 de 48 c7 c7 80 e7 db ac e8 f0 72 9a ff <0f> 0b 58 31 c0 5a 5b 5d 41 5c 41 5d 41 5e 41 5f e9 2b e5 5d 01 41
RSP: 0018:ffff88811cc27978 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff888140590ba0 RCX: ffffffffaaf20bae
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881f6fb6f40
RBP: ffff8881462ec000 R08: 0000000000000001 R09: ffffed1023984ee3
R10: ffff88811cc2771f R11: 00000000016cfcc0 R12: ffff888134383e08
R13: 0000000000000002 R14: ffff8881462ec668 R15: ffffffffaceab4c0
FS: 00007f23bfa98740(0000) GS:ffff8881f6f80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556de4a6f808 CR3: 0000000123c80000 CR4: 0000000000350ef0
Call Trace:
<TASK>
d_walk+0x6a/0x530
shrink_dcache_for_umount+0x6a/0x200
generic_shutdown_super+0x52/0x2a0
kill_anon_super+0x22/0x40
cifs_kill_sb+0x159/0x1e0
deactivate_locked_super+0x66/0xe0
cleanup_mnt+0x140/0x210
task_work_run+0xfb/0x170
syscall_exit_to_user_mode+0x29f/0x2b0
do_syscall_64+0xa1/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f23bfb93ae7
Code: ff ff ff ff c3 66 0f 1f 44 00 00 48 8b 0d 11 93 0d 00 f7 d8 64 89 01 b8 ff ff ff ff eb bf 0f 1f 44 00 00 b8 50 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 92 0d 00 f7 d8 64 89
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: prevent use-after-free due to open_cached_dir error paths
If open_cached_dir() encounters an error parsing the lease from the
server, the error handling may race with receiving a lease break,
resulting in open_cached_dir() freeing the cfid while the queued work is
pending.
Update open_cached_dir() to drop refs rather than directly freeing the
cfid.
Have cached_dir_lease_break(), cfids_laundromat_worker(), and
invalidate_all_cached_dirs() clear has_lease immediately while still
holding cfids->cfid_list_lock, and then use this to also simplify the
reference counting in cfids_laundromat_worker() and
invalidate_all_cached_dirs().
Fixes this KASAN splat (which manually injects an error and lease break
in open_cached_dir()):
==================================================================
BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0
Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65
CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Workqueue: cifsiod smb2_cached_lease_break
Call Trace:
<TASK>
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x660
kasan_report+0xd3/0x110
smb2_cached_lease_break+0x27/0xb0
process_one_work+0x50a/0xc50
worker_thread+0x2ba/0x530
kthread+0x17c/0x1c0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
open_cached_dir+0xa7d/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x51/0x70
kfree+0x174/0x520
open_cached_dir+0x97f/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Last potentially related work creation:
kasan_save_stack+0x33/0x60
__kasan_record_aux_stack+0xad/0xc0
insert_work+0x32/0x100
__queue_work+0x5c9/0x870
queue_work_on+0x82/0x90
open_cached_dir+0x1369/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff88811cc24c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 16 bytes inside of
freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: During unmount, ensure all cached dir instances drop their dentry
The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can
race with various cached directory operations, which ultimately results
in dentries not being dropped and these kernel BUGs:
BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
------------[ cut here ]------------
kernel BUG at fs/super.c:661!
This happens when a cfid is in the process of being cleaned up when, and
has been removed from the cfids->entries list, including:
- Receiving a lease break from the server
- Server reconnection triggers invalidate_all_cached_dirs(), which
removes all the cfids from the list
- The laundromat thread decides to expire an old cfid.
To solve these problems, dropping the dentry is done in queued work done
in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs()
flushes that workqueue after it drops all the dentries of which it's
aware. This is a global workqueue (rather than scoped to a mount), but
the queued work is minimal.
The final cleanup work for cleaning up a cfid is performed via work
queued in the serverclose_wq workqueue; this is done separate from
dropping the dentries so that close_all_cached_dirs() doesn't block on
any server operations.
Both of these queued works expect to invoked with a cfid reference and
a tcon reference to avoid those objects from being freed while the work
is ongoing.
While we're here, add proper locking to close_all_cached_dirs(), and
locking around the freeing of cfid->dentry. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fabrics: fix kernel crash while shutting down controller
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
The above kernel crash is regression caused due to changes implemented
in commit a54a93d0e359 ("nvme: move stopping keep-alive into
nvme_uninit_ctrl()"). Ideally we should stop keep-alive before destroyin
g the admin queue and freeing the admin tagset so that it wouldn't sneak
in during the shutdown operation. However we removed the keep alive stop
operation from the beginning of the controller shutdown code path in commit
a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()")
and added it under nvme_uninit_ctrl() which executes very late in the
shutdown code path after the admin queue is destroyed and its tagset is
removed. So this change created the possibility of keep-alive sneaking in
and interfering with the shutdown operation and causing observed kernel
crash.
To fix the observed crash, we decided to move nvme_stop_keep_alive() from
nvme_uninit_ctrl() to nvme_remove_admin_tag_set(). This change would ensure
that we don't forward progress and delete the admin queue until the keep-
alive operation is finished (if it's in-flight) or cancelled and that would
help contain the race condition explained above and hence avoid the crash.
Moving nvme_stop_keep_alive() to nvme_remove_admin_tag_set() instead of
adding nvme_stop_keep_alive() to the beginning of the controller shutdown
code path in nvme_stop_ctrl(), as was the case earlier before commit
a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()"),
would help save one callsite of nvme_stop_keep_alive(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfs/blocklayout: Don't attempt unregister for invalid block device
Since commit d869da91cccb ("nfs/blocklayout: Fix premature PR key
unregistration") an unmount of a pNFS SCSI layout-enabled NFS may
dereference a NULL block_device in:
bl_unregister_scsi+0x16/0xe0 [blocklayoutdriver]
bl_free_device+0x70/0x80 [blocklayoutdriver]
bl_free_deviceid_node+0x12/0x30 [blocklayoutdriver]
nfs4_put_deviceid_node+0x60/0xc0 [nfsv4]
nfs4_deviceid_purge_client+0x132/0x190 [nfsv4]
unset_pnfs_layoutdriver+0x59/0x60 [nfsv4]
nfs4_destroy_server+0x36/0x70 [nfsv4]
nfs_free_server+0x23/0xe0 [nfs]
deactivate_locked_super+0x30/0xb0
cleanup_mnt+0xba/0x150
task_work_run+0x59/0x90
syscall_exit_to_user_mode+0x217/0x220
do_syscall_64+0x8e/0x160
This happens because even though we were able to create the
nfs4_deviceid_node, the lookup for the device was unable to attach the
block device to the pnfs_block_dev.
If we never found a block device to register, we can avoid this case with
the PNFS_BDEV_REGISTERED flag. Move the deref behind the test for the
flag. |
| In the Linux kernel, the following vulnerability has been resolved:
sh: intc: Fix use-after-free bug in register_intc_controller()
In the error handling for this function, d is freed without ever
removing it from intc_list which would lead to a use after free.
To fix this, let's only add it to the list after everything has
succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix ordering of qlen adjustment
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Address an integer overflow
Dan Carpenter reports:
> Commit 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data
> structure") from Jun 22, 2020 (linux-next), leads to the following
> Smatch static checker warning:
>
> net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk()
> warn: potential user controlled sizeof overflow 'segcount * 4 * 4'
>
> net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
> 488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt)
> 489 {
> 490 u32 segcount;
> 491 __be32 *p;
> 492
> 493 if (xdr_stream_decode_u32(&rctxt->rc_stream, &segcount))
> ^^^^^^^^
>
> 494 return false;
> 495
> 496 /* A bogus segcount causes this buffer overflow check to fail. */
> 497 p = xdr_inline_decode(&rctxt->rc_stream,
> --> 498 segcount * rpcrdma_segment_maxsz * sizeof(*p));
>
>
> segcount is an untrusted u32. On 32bit systems anything >= SIZE_MAX / 16 will
> have an integer overflow and some those values will be accepted by
> xdr_inline_decode(). |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Flush partial mappings in error case
If some remap_pfn_range() calls succeeded before one failed, we still have
buffer pages mapped into the userspace page tables when we drop the buffer
reference with comedi_buf_map_put(bm). The userspace mappings are only
cleaned up later in the mmap error path.
Fix it by explicitly flushing all mappings in our VMA on the error path.
See commit 79a61cc3fc04 ("mm: avoid leaving partial pfn mappings around in
error case"). |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix out-of-bounds access of directory entries
In the case of the directory size is greater than or equal to
the cluster size, if start_clu becomes an EOF cluster(an invalid
cluster) due to file system corruption, then the directory entry
where ei->hint_femp.eidx hint is outside the directory, resulting
in an out-of-bounds access, which may cause further file system
corruption.
This commit adds a check for start_clu, if it is an invalid cluster,
the file or directory will be treated as empty. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent a potential integer overflow
If the tag length is >= U32_MAX - 3 then the "length + 4" addition
can result in an integer overflow. Address this by splitting the
decoding into several steps so that decode_cb_compound4res() does
not have to perform arithmetic on the unsafe length value. |
