| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Integer overflow in WebGL in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In sshd in OpenSSH before 10.6, the value "none" for a configuration option is sometimes interpreted as a filename but was intended to mean that a feature is disabled. |
| NVIDIA TensorRT contains a vulnerability where an attacker can cause an out of bounds read. A successful exploit of this vulnerability may lead to denial of service. |
| IBM Financial Transaction Manager (FTM) for RedHat OpenShift could allow a remote attacker to cause a denial of service due to allocation of resources without limits or throttling. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its
"if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff
tears the device down while pages are still swapped out. Nothing in
the rest of swapoff aborts the teardown, so those pages are lost.
Independently of swapoff, the collision also corrupts the counter and the
plist. On a device in normal use, a free that leaves bit 30 set in the
count makes swap_usage_sub() see the flag where there is only count, and
call add_to_avail_list(). It clears the bit with
fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below
the real one, and calls plist_add() on a device that is already listed,
tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking
the node a second time.
Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on
atomic_long_t instead. Note that the usage counter field itself is of
this same type, so it is still a valid bit. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: ms_block: destroy io_queue workqueue on removal
msb_init_disk() creates the per-card ordered workqueue msb->io_queue with
alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only
on the init error path; msb_remove() never destroys it. msb_stop() merely
flushes the queue, and neither msb_data_clear() nor put_disk() free it. As
a result every card insert/remove cycle leaks the workqueue and its
kworker, exhausting kernel memory over repeated cycles.
Destroy the workqueue in msb_remove() after the disk has been removed and
the queue drained. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: save input state data before secpath resets
xfrm_input() stores the current xfrm_state in the skb secpath while it
continues receive-side processing. Some input paths can reset that secpath
before xfrm_input() has finished dereferencing the state.
Receive callback users such as VTI and XFRM interfaces can reset the
secpath. The VTI receive path does so before checking whether the packet
crosses network namespaces, while the XFRM interface path does so only for
cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also
reset the secpath before the final drop callback reports the current
state's protocol.
If secpath_reset() drops the last state reference while the state is
concurrently deleted, xfrm_input() can still dereference the freed state
when selecting transport_finish() or reporting the drop callback protocol.
Save the state protocol on the stack while the state is still valid,
and use the already saved address family for transport_finish(). A larval
XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This
preserves the existing drop-path fallback while avoiding the post-reset
state dereferences without adding an extra state reference to every
received packet. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: cap hh_flows_limit at change time
hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge
hh_flows_limit lets each new heavy-hitter flow pass the
hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size
kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory
growth.
Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the
hhf_init() default) and report the rejected value via extack. The
deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on
TCA_OPTIONS. Configs relying on hh_limit above the default were relying
on unbounded, unsafe behaviour and are not supported going forward.
hhf_init() also ran hhf_change() before setting the default
hh_flows_limit, so a user-supplied hh_limit at add time was clobbered
back to 2048. Set the default before hhf_change() so the configured
value sticks.
This is a follow-up to commit eb56a495f59b ("net/sched: hhf: clamp
quantum in change and init paths"), which bounded the quantum of the
same qdisc; the hh_flows_limit bound is the remaining unbounded knob of
that series' scope.
Conditions to recreate the bug: CAP_NET_ADMIN in a user namespace;
tc qdisc change dev X root hhf hh_limit 4294967295 succeeds and the
value is echoed by tc qdisc show, unbounding heavy-hitter flow
allocations; also tc qdisc add dev X root hhf hh_limit 500 stores 2048
instead of 500. |
| When Gitea's built-in SSH server is enabled (`START_SSH_SERVER = true`), the presented public key was looked up with an SQL `LIKE` comparison of its encoded content, which is case-insensitive on some databases, including the default SQLite. An attacker who can construct a case variant of another user's registered RSA public key for which they can derive the private key could have that key matched to the victim's account and authenticate over SSH as that user. Keys are now looked up by fingerprint. |
| When a Gitea Actions run was inserted, older runs in the same workflow-level concurrency group were cancelled without checking whether the new run still needed approval. Because fork pull request runs are inserted under the base repository, a user who can open a pull request from a fork could cancel trusted in-progress runs that share a concurrency group with `cancel-in-progress` enabled, without approval and without running any code. On self-hosted runners this can interrupt deployments and leave partial state behind. |
| uv is a Python package and project manager written in Rust. From 0.12.7 until 0.12.18, uv wheel extraction on Windows can process a malicious wheel in a way that writes a file outside the installation prefix, including an executable in a directory already present on the user's PATH. Non-Windows hosts are not affected. This issue is fixed in version 0.12.18. |
| Shopclass before 6.2.0 contains a stored cross-site scripting vulnerability that allows self-registered non-admin users to inject scripts into item listing descriptions when frontend TinyMCE is enabled. Attackers can submit malicious JavaScript, which ItemActions.php saves without tag stripping, causing it to execute in the site origin for any visitor viewing the listing. |
| Feehi CMS 2.1.1 contains a Server-Side Request Forgery (SSRF) vulnerability in the UEditor catchimage endpoint. The private-IP validation does not block loopback or link-local addresses, allowing an attacker to make the server probe internal HTTP services through response differences. |
| In Modem, there is a possible out of bounds read due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01774038; Issue ID: MSV-8912. |
| A vulnerability was found in code-projects Human Resource Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /views/admin/liveEventHistory.php of the component Live Event History. The manipulation of the argument eventSubject results in cross site scripting. The attack may be launched remotely. The exploit has been made public and could be used. |
| DigitalCanion has discovered a path traversal vulnerability that allows to view or download sensitive system files over the portal https://<ip>:8443 via menus Administration -> View Logs |
| Perforce P4 Search container images prior to 2026.4.2 reset the service authentication token to a publicly documented default value. An unauthenticated attacker with network access can obtain the highest application privilege, potentially leading to arbitrary code execution and compromise of the connected P4 Server. |
| DigitalCanion has discovered a vulnerability in the backup restoration functionality that allows an attacker with access to the configured backup repository to introduce arbitrary files into the system during restoration.
The specific flaw exists within the backup restoration mechanism, which fails to properly validate the paths, file types, integrity, and authenticity of files contained within a restored TGZ archive. The application does not perform file-signature verification before extracting the archive, allowing a specially crafted backup to contain attacker-controlled files.
An attacker with access to the backup SFTP or other configured repository can therefore provide a malicious TGZ archive that, when restored by the system, may place arbitrary files on the underlying Linux system. Depending on the location and permissions of the extracted files, this behavior can potentially be leveraged to achieve arbitrary code execution with root privileges and compromise the underlying virtual machine.
The absence of enforced backup passwords further reduces the protection provided by the backup mechanism and may facilitate unauthorized access to the repository. |
| In Progress® Telerik® Fiddler® Classic for Windows, versions prior to v6.0.20262.10021, a time-of-check time-of-use (TOCTOU) race condition exists in the installation of the HTTPS interception root certificate into the Local Computer certificate store. Fiddler writes the certificate to a temporary file in a user-writable location and then launches the external TrustCert helper application, which elevates and imports the certificate from that file. A local threat actor with low privileges who replaces the temporary file between the time it is written and the time the elevated helper reads it can cause an attacker-supplied root certificate to be installed in the Local Computer Trusted Root Certification Authorities store, enabling subsequent interception and modification of TLS-protected traffic on the machine. Successful exploitation requires the user to initiate the certificate trust operation and approve the elevation prompt. |
| In Progress® Telerik® Fiddler® Classic for Windows, versions prior to v6.0.20262.10021, the integrity check applied to the external helper tools launched by the application is insufficient. Before executing a helper tool, the application only verifies that the file carries a valid Authenticode signature whose certificate subject name matches a broad allow list of publisher name fragments, rather than verifying that the file is the specific executable shipped with that version of the product. A local threat actor with low privileges who replaces one of these helper executables with any other validly signed binary from an allow-listed publisher can cause the substituted binary to be executed by the application, including with Administrator privileges for the tools that request elevation, resulting in privilege escalation and execution of unintended code. Successful exploitation requires the user to launch the affected external tool and to approve the elevation prompt without noticing that it refers to a different executable. |
