| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent stale XSK buffer release on refill retry
When an XDP redirect to an AF_XDP socket fails because its RX ring is
full, the XSK core frees the buffer. During the subsequent batched refill
of a legacy cyclic RQ, mlx5e also releases the WQE's XSK buffer before
allocating a replacement. If that refill succeeds only partially, a WQE
left without a replacement retains its old buffer pointer.
The buffer can meanwhile be allocated to another WQE. A later refill
retry can then free the live buffer through the stale pointer and publish
the same UMEM frame twice.
Mark the WQE as released immediately after the driver-side free. The flag
is already cleared when a replacement buffer is assigned, so refill
retries no longer release stale pointers.
The failure is silent and produces no kernel warning or splat. A
standalone legacy cyclic-RQ zero-copy libxsk reproducer, using 64-byte UDP
traffic offered at 12 Mpps, detected it: stock stopped after 2,854,914
packets in 4.094 seconds, with 4,542 xdp_rx_ring_full events and 64
ownership/double-publication errors. With this change it processed
356,904,225 packets in 30 seconds despite 571,405 xdp_rx_ring_full events,
with no ownership or data errors. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: fix DMA mapping length for padded small packets
Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412
NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces:
DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000
[fault reason 0x06] PTE Read access is not set
bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001
...
NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out
The fault address (0xfc499000) is on an exact 4KB page boundary,
pointing to a DMA read buffer overrun.
In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes),
such as 42-byte untagged ARP frames, are padded:
if (length < BNXT_MIN_PKT_SIZE) {
pad = BNXT_MIN_PKT_SIZE - length;
if (skb_pad(skb, pad))
goto tx_kick_pending;
length = BNXT_MIN_PKT_SIZE;
}
mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE);
...
dma_unmap_len_set(tx_buf, len, len);
However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes)
and is left unadjusted after padding. Consequently, dma_map_single() and
dma_unmap_len_set() map and track only 42 bytes.
Later, the hardware TX buffer descriptor is programmed with the padded length:
txbd->tx_bd_len_flags_type =
cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags |
TX_BD_FLAGS_PACKET_END);
The NIC DMA engine is thus instructed to read 52 bytes from a region where
only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB
page (within 'pad' bytes of the next page), the hardware DMA read overruns
into the unmapped adjacent page, triggering an IOMMU fault.
This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic
and races when toggling HW VLAN offload") because reserving extra VLAN
headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data
offsets and potentially causing small frames to land right against page
boundaries.
Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in
bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled,
because padding might linearize the skb.
This ensures skb->len and skb_headlen(skb) reflect the padded size so
that dma_map_single() maps the full buffer and the descriptor length is
consistent. This also removes the temporary 'pad' variable and masking logic.
The padding is done after the SW USO branch, otherwise
bnxt_sw_udp_gso_xmit() would account the padding as UDP payload
and send it in extra segments.
Note that SW USO segments are still not padded: with IPv4, a segment
carrying less than 10 bytes of UDP payload (small gso_size, or a short
last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE.
This is a separate issue, left for a followup patch. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use active memslots for the per-vCPU MMIO cache
KVM tags the per-vCPU MMIO cache with a memslot generation so that a
memslot update invalidates cached MMIO information. Both the fill and
validation paths use kvm_memslots(), which unconditionally selects address
space 0, even when the vCPU is running in SMM and using address space 1.
Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the
memslot generation to the cache key so that a memslot update could not
leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM
to the MMU role, support SMRAM address space") added the SMM address space,
these helpers were not converted to use the active memslots.
Consequently, an update to the SMM memslots can leave an entry from the old
SMM address space apparently valid after the vCPU returns to the normal
address space. A guest can then cause an access to valid RAM at the same
GFN to be returned to userspace as KVM_EXIT_MMIO.
Completing that exit through the VMM's RAM address space writes the backing
page without going through KVM's write-tracking path. If the page backs a
nested EPT table, KVM can continue using shadow translations derived from
the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault()
catches this invalid cache and memslot combination.
Use the vCPU's active memslots when caching and validating the entry.
Memslot generations are unique across address spaces, so the generation
also distinguishes the normal and SMM views. This matches the MMIO SPTE
cache, which already uses kvm_vcpu_memslots().
On an unpatched current-mainline kernel, a regression test that fills the
cache in SMM and updates only the SMM memslots fails the intended RAM write
and triggers the kvm_mmu_write_protect_fault() warning. With this change,
the same test completes the RAM write without a warning. The x86/smm_test,
set_memory_region_test, and memslot_modification_stress_test selftests also
pass. |
| Missing authentication for critical function in Windows Security Account Manager allows an authorized attacker to perform tampering locally. |
| A flaw was found in the clevis PKCS#11 pin. The clevis-pkcs11-afunix-socket-unlock daemon creates AF_UNIX sockets without explicit permission restrictions or peer credential verification. Under a permissive process umask, any local user can connect to the control socket and inject arbitrary device/key pairs, or connect to the data socket to receive LUKS passphrases. |
| A flaw was found in libarchive. An attacker can cause a Denial of Service (DoS) or potential information disclosure due to a use-after-free vulnerability, which occurs when a program reads memory that has already been released. This issue arises when the archive_entry_copy_mac_metadata() function deallocates an internal buffer before completing a data copy. An attacker who can supply input to an application utilizing this function can trigger the flaw to crash the application or read uninitialized memory data. |
| A flaw was found in the OpenShift client oc. When extracting container image layers with oc image extract, the application fails to properly sanitize symbolic and hard link targets pointing to absolute paths or to sibling directories of the extraction destination. An attacker who supplies a malicious container image can exploit this vulnerability by embedding links, and a chained file entry, that reference locations outside the intended extraction directory. This allows the attacker to write attacker-controlled content to arbitrary locations on the host filesystem with the privileges of the user running the command, potentially leading to file modification outside the destination directory. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: remove stale channels from all sessions on teardown
ksmbd_sessions_deregister() removes a connection's channels from other
sessions' channel lists only while conn->binding is still set:
if (conn->binding) {
hash_for_each_safe(sessions_table, ...)
ksmbd_chann_del(conn, sess);
}
conn->binding is a transient flag: it is cleared once a binding
SESSION_SETUP completes, and also by a subsequent non-binding
SESSION_SETUP on the same connection (a reauthentication on a bound
channel, or a new SessionId==0 setup). A connection that has bound a
channel into another session's ksmbd_chann_list and then clears
conn->binding leaves that channel behind when it disconnects: the
channel, whose chann->conn points at the now freed struct ksmbd_conn,
stays on the owner session's list.
When the owning connection later tears down, the second loop
dereferences the stale channel:
xa_for_each(&sess->ksmbd_chann_list, chann_id, chann)
if (chann->conn != conn)
ksmbd_conn_set_exiting(chann->conn); /* freed */
which is a use-after-free write into the freed ksmbd_conn (the same
stale channel is also walked by show_proc_session() through /proc). The
session is leaked as well, because its channel list never empties.
Remove the conn->binding gate so a connection always removes its
channels from every session on teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
pfcp: make sure the SEID is linear before reading it
pfcp_encap_recv() only makes sure that the UDP header and the 4 byte
PFCP header are in the linear area. When the S flag is set,
pfcp_session_recv() then reads the 8 byte SEID that follows, which is
not covered by the pskb_may_pull() check.
A short PFCP packet with the S flag set, or one whose session header
lies in a fragment, therefore makes pfcp_session_recv() read beyond the
end of the packet data, and whatever it finds there is stored in the
tunnel metadata that flower later classifies on.
Pull up to the end of the SEID before reading it, and drop packets
that are too short to contain it. Reload the header pointer afterwards
since pskb_may_pull() may reallocate the skb head.
Use offsetofend() rather than sizeof(struct pfcphdr_session): the
structure is not packed, so its size is 16 bytes because of the
alignment of the __be64 member, while the header on the wire is only 12
bytes, and valid session messages would be dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate pitch coming from userspace
Validate the pitch, alongside the box dimensions before trying
to copy data from the underlying surface. Fixes possible
out of bounds reads with cursor snooping. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/cache: Decouple sched_cache_group from mm to fix UAF
Currently the sched cache grouping is by mm and the scheduling statistics
sched_cache_stat lives in the mm structure. This ties the life cycle
of scheduling stats with mm.
In account_mm_sched(), the scheduling stats are accessed by
task->mm->sc_stat. However, a task may be switching mm on one CPU when
another CPU is running account_mm_sched(), and possibly accessing the
old mm that was freed. This problem was found when running tests with
KASAN by Hyunwoo:
https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/
Instead of serializing the mm access by introducing extra acquisition of
rq lock in the mm free path, extract sched_cache_stat from mm_struct,
rename it as sched_cache_group and manage its life cycle apart from
mm_struct with its own ref counting. This allows us in the next patch
access sched_cache_group directly from task, and add a refcount
on sched_cache_group when a task links to it. This prevents the use
after free issue when accessing stale and released old mm and its
sched cache stat a task switches to a new mm while account_mm_sched()
is done elsewhere.
The other benefit of this restructure is in the future, the grouping of
tasks to a LLC would have the flexibility to be associated with a user
defined grouping, or cgroup, cookie group, numa_group or others instead
of just with a single mm address space.
Rename sched_cache_stat to sched_cache_group and turn it into a refcounted
object allocated from mm_struct. The mm_struct now holds a pointer
(sched_cache_grp) to this object instead of embedding it. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Allocation of resources without limits or throttling in Windows Netlogon allows an authorized attacker to deny service over a network. |
| Out-of-bounds read in Windows HTTP.sys allows an authorized attacker to disclose information locally. |
| Use of uninitialized resource in Windows Win32 Kernel Subsystem allows an authorized attacker to disclose information locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Credential Manager allows an authorized attacker to elevate privileges locally. |
| Generation of error message containing sensitive information in Windows NTFS allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Disable device buffer exporting
Device buffers are never intended to be exported. Disable exporting
support explicitly. |
