| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk->buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_net: check TX pull result before RX copy
vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is
currently added to the unsigned byte counter and then passed as a size_t
length to receive_filter() and vringh_iov_push_iotlb(). A negative error
can therefore become a large length in the RX path.
Handle non-positive pull results before every length use. Count the TX
error and complete the consumed TX descriptor with zero bytes.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: hold a reference to thread_pid across proc_flush_pid
Commit 0a36bad01731 ("release_task: kill the no longer needed
get/put_pid(thread_pid)") removed the reference around proc_flush_pid().
It assumed that free_pids(post.pids) at the end of release_task() would
keep thread_pid alive until then.
That assumption is wrong. __change_pid() only records a detached PID in
post.pids when pid_has_task() is false for every PIDTYPE. If another task
still uses the exiting task's PID as its process group or session ID,
__unhash_process() removes the exiting task's PIDTYPE_PID link but leaves
the PID out of post.pids. release_task() therefore holds no reference to
it after dropping tasklist_lock.
The other task can then remove the remaining PIDTYPE links. Its
free_pids() call schedules delayed_put_pid(), and the RCU callback can free
the PID before the first release_task() reaches proc_flush_pid().
An unprivileged reproducer races wait4(-1) against setsid() to trigger this
ordering. Three of three fresh v7.2 KASAN boots reported:
BUG: KASAN: slab-use-after-free in
proc_invalidate_siblings_dcache+0x3e2/0x3f0
Read of size 8 by task h7_pid_reaper/1921
Call Trace:
proc_invalidate_siblings_dcache
release_task
wait_consider_task
__do_wait
do_wait
kernel_wait4
Freed by task 0:
kmem_cache_free
put_pid
delayed_put_pid
rcu_core
Last potentially related work creation:
__call_rcu_common
free_pids
ksys_setsid
KASAN identified a 144-byte object from the pid cache and located the bad
read 80 bytes into the freed object, matching pid->inodes. With an
explicit reference, three of three fresh boots completed without a KASAN
report. The concurrent RCU callback dropped its reference while
proc_flush_pid() was protected, and the balancing put_pid() performed the
final free afterward.
Take a reference before __unhash_process() clears p->thread_pid and release
it after proc_flush_pid() completes.
A tested source reproducer is available privately on request. No
controlled read or write, information leak, or privilege escalation is
claimed. The mainline patch applies directly to v6.19.y and newer;
v6.16.y through v6.18.y need a context-adjusted backport. |
| A MongoDB driver component could write sensitive configuration information, including a credential used for outbound network connectivity, to application log output in cleartext during routine client initialization. This occurs automatically as part of normal operation and requires no special privileges to trigger. A party able to read the affected application's logs or downstream log-aggregation storage could recover the credential and reuse it to authenticate to the associated network infrastructure. This issue affects confidentiality only. |
| Improper limitation of a pathname to a restricted directory ('path traversal') in Azure Arc allows an unauthorized attacker to elevate privileges over a network. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Missing authentication for critical function in Azure AI Foundry allows an unauthorized attacker to elevate privileges over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: initialize policy rwsem before sysfs publication
cpufreq_policy_alloc() initializes policy->rwsem after
kobject_init_and_add() has created the policy sysfs directory and its
default attributes. A sysfs access can therefore reach a policy callback
before the semaphore has been initialized.
Initialize policy->rwsem before publishing the policy kobject so sysfs
callbacks always see an initialized semaphore. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: zero-initialize policy cpumask before sysfs publication
cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(),
i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus
masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate
kmalloc_node() allocation, so its bitmap holds whatever the slab allocator
left behind:
cpufreq_online()
cpufreq_policy_alloc()
alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */
kobject_init_and_add() /* policy%u/ appears in sysfs */
cpufreq_policy_online()
cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */
This leaves a window in which the sysfs attributes are already reachable
while policy->cpus is still garbage. show()/store() gate on
policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero
bitmap makes them run the attribute callbacks on a policy that is not
initialized yet.
Fix this by using zalloc_cpumask_var() for policy->cpus. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: Don't leak return code when parsing firmware format v2
When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally
ignores all security headers. However, the implementation simply breaks
from a switch statement and leaks uninitialized return code `rc' (if the
first section is a security one) or the previous section's `rc'.
Fix it by really skipping a loop with `continue'. For consistency and
readability, also do the same for the default case. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sti: initialize IRQ lock before requesting IRQ
uni_reader_init() registers the shared IRQ before initializing
reader->irq_lock. A pending interrupt can invoke the handler while the
lock is still uninitialized.
Initialize the lock before registering the IRQ so the interrupt path
always sees valid lock state. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Fix ethosu_job_open() return value
A WARN_ON() returns a 0 or 1, not the original negative errno. Just drop
the WARN_ON() as the FD open will pass the return code to userspace and
there's only one possible source of the error (drm_sched_entity_init()). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the var ref when its initialization fails
create_var_ref() allocates a VAR_REF hist_field and then calls
init_var_ref() to fill it in. When that fails the field is leaked.
commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy
var_refs") made destroy_hist_field() return early for
HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's
var_refs[] array instead. create_var_ref() adds the field to that array
only after init_var_ref() has succeeded, so on this path the field is in
neither place and nothing frees it. The call was correct when it was
written, before var refs were taken out of destroy_hist_field().
init_var_ref() cannot free it either. The caller owns the field, so
init_var_ref() undoes only its own string allocations and leaves the
field alone. Freeing it there would leave create_var_ref() passing freed
memory to destroy_hist_field(), which reads its flags.
Call __destroy_hist_field(), which frees the field without consulting
the flag. |
