Export limit exceeded: 359412 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (929 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31521 | 1 Linux | 1 Linux Kernel | 2026-04-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: module: Fix kernel panic when a symbol st_shndx is out of bounds The module loader doesn't check for bounds of the ELF section index in simplify_symbols(): for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) { const char *name = info->strtab + sym[i].st_name; switch (sym[i].st_shndx) { case SHN_COMMON: [...] default: /* Divert to percpu allocation if a percpu var. */ if (sym[i].st_shndx == info->index.pcpu) secbase = (unsigned long)mod_percpu(mod); else /** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr; sym[i].st_value += secbase; break; } } A symbol with an out-of-bounds st_shndx value, for example 0xffff (known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic: BUG: unable to handle page fault for address: ... RIP: 0010:simplify_symbols+0x2b2/0x480 ... Kernel panic - not syncing: Fatal exception This can happen when module ELF is legitimately using SHN_XINDEX or when it is corrupted. Add a bounds check in simplify_symbols() to validate that st_shndx is within the valid range before using it. This issue was discovered due to a bug in llvm-objcopy, see relevant discussion for details [1]. [1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/ | ||||
| CVE-2026-31483 | 1 Linux | 1 Linux Kernel | 2026-04-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/syscalls: Add spectre boundary for syscall dispatch table The s390 syscall number is directly controlled by userspace, but does not have an array_index_nospec() boundary to prevent access past the syscall function pointer tables. | ||||
| CVE-2026-31497 | 1 Linux | 1 Linux Kernel | 2026-04-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: clamp SCO altsetting table indices btusb_work() maps the number of active SCO links to USB alternate settings through a three-entry lookup table when CVSD traffic uses transparent voice settings. The lookup currently indexes alts[] with data->sco_num - 1 without first constraining sco_num to the number of available table entries. While the table only defines alternate settings for up to three SCO links, data->sco_num comes from hci_conn_num() and is used directly. Cap the lookup to the last table entry before indexing it so the driver keeps selecting the highest supported alternate setting without reading past alts[]. | ||||
| CVE-2026-31512 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv() l2cap_ecred_data_rcv() reads the SDU length field from skb->data using get_unaligned_le16() without first verifying that skb contains at least L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads past the valid data in the skb. The ERTM reassembly path correctly calls pskb_may_pull() before reading the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the same validation to the Enhanced Credit Based Flow Control data path. | ||||
| CVE-2026-41677 | 1 Rust-openssl Project | 1 Rust-openssl | 2026-04-28 | 9.1 Critical |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.0 to before 0.10.78, the *_from_pem_callback APIs did not validate the length returned by the user's callback. A password callback that returns a value larger than the buffer it was given can cause some versions of OpenSSL to over-read this buffer. OpenSSL 3.x is not affected by this. This vulnerability is fixed in 0.10.78. | ||||
| CVE-2026-41285 | 1 Openbsd | 1 Openbsd | 2026-04-28 | 4.3 Medium |
| In OpenBSD through 7.8, the slaacd and rad daemons have an infinite loop when they receive a crafted ICMPv6 Neighbor Discovery (ND) option (over a local network) with length zero, because of an "nd_opt_len * 8 - 2" expression with no preceding check for whether nd_opt_len is zero. | ||||
| CVE-2026-31495 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use netlink policy range checks Replace manual range and mask validations with netlink policy annotations in ctnetlink code paths, so that the netlink core rejects invalid values early and can generate extack errors. - CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check. - CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count. - CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks. - CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags. Extracted from a broader nf-next patch by Florian Westphal, scoped to ctnetlink for the fixes tree. | ||||
| CVE-2026-40886 | 1 Argoproj | 2 Argo-workflows, Argo Workflows | 2026-04-28 | 7.7 High |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From 3.6.5 to 4.0.4, an unchecked array index in the pod informer's podGCFromPod() function causes a controller-wide panic when a workflow pod carries a malformed workflows.argoproj.io/pod-gc-strategy annotation. Because the panic occurs inside an informer goroutine (outside the controller's recover() scope), it crashes the entire controller process. The poisoned pod persists across restarts, causing a crash loop that halts all workflow processing until the pod is manually deleted. This vulnerability is fixed in 4.0.5 and 3.7.14. | ||||
| CVE-2026-31484 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check __io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second half of the SQE would be past the end of the sq_sqes array. The current check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented when a 128-byte SQE is encountered, not on every iteration. The actual array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask (the last slot) while the wrap check passes. Fix by checking sq_idx directly. Keep the sq_head increment so the loop still skips the second half of the 128-byte SQE on the next iteration. | ||||
| CVE-2026-29645 | 2 Openxiangshan, Xiangshan | 2 Nemu, Nemu | 2026-04-28 | 7.5 High |
| NEMU (OpenXiangShan/NEMU) before v2025.12.r2 contains an improper instruction-validation flaw in its RISC-V Vector (RVV) decoder. The decoder does not correctly validate the funct3 field when decoding vsetvli/vsetivli/vsetvl, allowing certain invalid OP-V instruction encodings to be misinterpreted and executed as vset* configuration instructions rather than raising an illegal-instruction exception. This can be exploited by providing crafted RISC-V binaries to cause incorrect trap behavior, architectural state corruption/divergence, and potential denial of service in systems that rely on NEMU for correct execution or sandboxing. | ||||
| CVE-2025-24100 | 1 Apple | 1 Macos | 2026-04-28 | 3.3 Low |
| A logic issue was addressed with improved restrictions. This issue is fixed in macOS Sequoia 15.3, macOS Sonoma 14.7.3, macOS Ventura 13.7.3. An app may be able to access information about a user's contacts. | ||||
| CVE-2026-33471 | 1 Nimiq | 2 Nimiq-block, Nimiq Proof-of-stake | 2026-04-27 | 9.6 Critical |
| nimiq-block contains block primitives to be used in Nimiq's Rust implementation. `SkipBlockProof::verify` computes its quorum check using `BitSet.len()`, then iterates `BitSet` indices and casts each `usize` index to `u16` (`slot as u16`) for slot lookup. Prior to version 1.3.0, if an attacker can get a `SkipBlockProof` verified where `MultiSignature.signers` contains out-of-range indices spaced by 65536, these indices inflate `len()` but collide onto the same in-range `u16` slot during aggregation. This makes it possible for a malicious validator with far fewer than `2f+1` real signer slots to pass skip block proof verification by multiplying a single BLS signature by the same factor. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. | ||||
| CVE-2026-41313 | 2 Py-pdf, Pypdf Project | 2 Pypdf, Pypdf | 2026-04-27 | 6.5 Medium |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions prior to 6.10.2 can craft a PDF which leads to long runtimes. This requires loading a PDF with a large trailer `/Size` value in incremental mode. This has been fixed in pypdf 6.10.2. As a workaround, one may apply the changes from the patch manually. | ||||
| CVE-2026-41168 | 2 Py-pdf, Pypdf Project | 2 Pypdf, Pypdf | 2026-04-27 | 5.3 Medium |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions prior to 6.10.1 can craft a PDF which leads to long runtimes. This requires cross-reference streams with wrong large `/Size` values or object streams with wrong large `/N` values. This has been fixed in pypdf 6.10.1. As a workaround, one may apply the changes from the patch manually. | ||||
| CVE-2026-41239 | 1 Cure53 | 1 Dompurify | 2026-04-27 | 6.8 Medium |
| DOMPurify is a DOM-only cross-site scripting sanitizer for HTML, MathML, and SVG. Starting in version 1.0.10 and prior to version 3.4.0, `SAFE_FOR_TEMPLATES` strips `{{...}}` expressions from untrusted HTML. This works in string mode but not with `RETURN_DOM` or `RETURN_DOM_FRAGMENT`, allowing XSS via template-evaluating frameworks like Vue 2. Version 3.4.0 patches the issue. | ||||
| CVE-2026-1352 | 1 Ibm | 1 Db2 | 2026-04-27 | 6.5 Medium |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in data query logic. | ||||
| CVE-2026-6839 | 2 Samsung, Samsung Open Source | 2 One, One | 2026-04-27 | 6.6 Medium |
| Improper validation of STRING tensor offsets could allows malformed string metadata to trigger out of bounds access during constant tensor import in Samsung Open Source ONE Affected version is prior to commit 1.30.0. | ||||
| CVE-2026-40890 | 1 Gomarkdown | 1 Markdown | 2026-04-27 | 7.5 High |
| The package `github.com/gomarkdown/markdown` is a Go library for parsing Markdown text and rendering as HTML. Processing a malformed input containing a < character that is not followed by a > character anywhere in the remaining text with a SmartypantsRenderer will lead to Out of Bounds read or a panic. This vulnerability is fixed with commit 759bbc3e32073c3bc4e25969c132fc520eda2778. | ||||
| CVE-2026-23365 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: validate USB endpoints The kalmia driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints. | ||||
| CVE-2026-23388 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases. | ||||