| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pip would treat console_scripts and gui_scripts as paths instead of file names without sanitizing the resolved absolute path to the installation directory, leading to entry points being installed outside the installation directory. |
| Use of inherently dangerous function PQfn(..., result_is_int=0, ...) in PostgreSQL libpq lo_export(), lo_read(), lo_lseek64(), and lo_tell64() functions allows the server superuser to overwrite a client stack buffer with an arbitrarily-large response. Like gets(), PQfn(..., result_is_int=0, ...) stores arbitrary-length, server-determined data into a buffer of unspecified size. Because both the \lo_export command in psql and pg_dump call lo_read(), the server superuser can overwrite pg_dump or psql stack memory. Versions before PostgreSQL 18.4, 17.10, 16.14, 15.18, and 14.23 are affected. |
| CyberPanel before 3.0.0 contains a hard-coded JWT secret vulnerability in the WebTerminal FastAPI SSH service that allows unauthenticated remote attackers to forge valid authentication tokens and obtain an interactive root shell via WebSocket on port 8888. Attackers can craft a forged JWT signed with the hardcoded secret value, specifying ssh_user=root, to authenticate to the terminal service without any valid credentials and receive a root shell. |
| jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.10.0 until 2.18.8, 2.21.4, and 3.1.4, BasicPolymorphicTypeValidator.Builder.allowIfSubTypeIsArray() allowlists any array type based only on clazz.isArray(), without validating the array's component (element) type against the configured allowlist. A PTV built with allowIfSubTypeIsArray() plus an explicit concrete-type allowlist therefore still permits EvilType[] even though EvilType is not allowlisted. When Jackson deserializes the elements and no per-element type IDs are present, it instantiates the component type directly with no further PTV check, bypassing the allowlist. This vulnerability is fixed in 2.18.8, 2.21.4, and 3.1.4. |
| rsync before 3.5.0 contains a symlink following vulnerability that allows local attackers to overwrite arbitrary files by placing a symlink at a predictable output path such as --log-file, --write-batch, or daemon-mode log and statistics paths. Attackers can exploit rsync's failure to reject symlinks during ancillary file writes to redirect output to arbitrary filesystem locations, achieving local privilege escalation on installations where rsync runs with elevated privileges such as setuid or privileged daemon configurations. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush
On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and
flushes every fragment queue that is not yet complete using
inet_frag_queue_flush(). That helper frees all the skbs queued on the
fragment queue but does not set INET_FRAG_COMPLETE, and leaves
q->fragments_tail and q->last_run_head pointing at the freed skbs.
The queue itself stays in the rhashtable.
fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups,
but it cannot stop a fragment that already obtained the queue through
inet_frag_find() earlier and stalled just before taking the queue lock.
Once that fragment resumes after the flush and takes the queue lock,
it passes the INET_FRAG_COMPLETE check and then dereferences the freed
fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of
that pointer and, on the append path, writes ->next_frag, causing a
slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly
share the same flush path and are affected as well.
Reset rb_fragments, fragments_tail and last_run_head in
inet_frag_queue_flush() so a flushed queue no longer points at the
freed skbs. A fragment that resumes after the flush and takes the
queue lock then finds an empty queue and starts a new run instead of
dereferencing the freed fragments_tail. ip_frag_reinit() already
performed this reset after its own flush, so drop the now duplicate
code there. |
| Previously, CVE-2024-45337 fixed an authorization bypass for misused ssh server configurations; if any other type of callback is passed other than public key, then the source-address validation would be skipped. |
| An issue was discovered in OpenStack oslo.messaging 1.0.0 through 17.3.0. The oslo.messaging RabbitMQ driver does not perform TLS hostname verification when connecting to the message broker. When ssl_ca_file is configured, the driver enables certificate chain validation but does not pass the expected broker hostname into the underlying TLS stack. Any certificate signed by the deployment CA is accepted regardless of hostname, allowing an attacker who can intercept control-plane traffic to impersonate the RabbitMQ broker and perform a man-in-the-middle attack on RPC and notification traffic. All OpenStack services using oslo.messaging with RabbitMQ over TLS are affected. |
| An issue was discovered in OpenStack Keystone before 29.0.2. POST /v3/credentials did not validate that the caller-supplied project_id for an EC2-type credential matched the project of the authenticating application credential. This allowed an attacker holding an unrestricted application credential for project A to create an EC2 credential targeting project B; a subsequent /v3/ec2tokens exchange would then issue a Keystone token scoped to project B while still carrying the original app_cred_id, enabling cross-project lateral movement within the credential owner's role footprint. |
| Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_cert and public_key modules) allows a DNS nameConstraints bypass via subject CommonName fallback in TLS hostname verification.
Two flaws combine to allow a subordinate CA whose DNS nameConstraints are restricted (e.g. permitted;DNS:allowed.example.com) to issue a leaf certificate that an OTP TLS client accepts as a valid identity for an out-of-scope hostname (e.g. victim.example.com):
First, pubkey_cert:validate_names/6 in lib/public_key/src/pubkey_cert.erl only checks SAN DNS entries against nameConstraints. Per RFC 5280, a permitted DNS subtree only restricts certificates that contain a DNS-typed name. A leaf with no subjectAltName therefore trivially satisfies any permitted;DNS:... constraint regardless of its subject commonName.
Second, public_key:pkix_verify_hostname/3 in lib/public_key/src/public_key.erl falls back to the subject commonName when no subjectAltName is present, extracting id-at-commonName attributes as presented IDs and matching them against the reference hostname. The strict pkix_verify_hostname_match_fun(https) matcher does not suppress this fallback.
The result is that path validation accepts a CN-only leaf under a DNS-constrained intermediate (no SAN means the nameConstraints are not triggered), and hostname verification then accepts it via the CN fallback. The bypass is reachable from stock ssl:connect with verify_peer, a trusted CA, SNI, and the canonical strict https hostname matcher.
This issue affects OTP from OTP 19.3 before OTP 29.0.1, OTP 28.5.0.1, OTP 27.3.4.12 and OTP 26.2.5.21, corresponding to public_key from 1.4 before 1.21.1, 1.20.3.1, 1.17.1.3 and 1.15.1.7. |
| Improper Following of a Certificate's Chain of Trust vulnerability in Erlang OTP public_key (pubkey_cert module) allows a non-CA certificate to be accepted as an intermediate issuer, enabling certificate chain forgery.
In lib/public_key/src/pubkey_cert.erl, pubkey_cert:validate_extensions/7 contains two flaws that together allow a certificate with basicConstraints cA:false and no keyUsage extension to be used as an intermediate issuer in a chain passed to public_key:pkix_path_validation/3: the cA:false clause recurses into the remaining extensions without rejecting the certificate when it is in issuer position, and the keyUsage check only fires when the extension is present, so a certificate lacking keyUsage entirely bypasses the keyCertSign enforcement.
Any party holding an end-entity certificate with basicConstraints cA:false and no keyUsage extension, issued by any CA in the victim's trust store, can use that certificate's private key to sign forged leaf certificates for arbitrary identities. public_key:pkix_path_validation/3 accepts the resulting chain, and by extension every TLS or mTLS endpoint built on the OTP ssl application that relies on the default verifier is affected, including server identity verification on the client side and client certificate verification on mTLS servers.
This issue affects OTP from OTP 17.0 before OTP 29.0.1, OTP 28.5.0.1, OTP 27.3.4.12 and OTP 26.2.5.21, corresponding to public_key from 0.22 before 1.21.1, 1.20.3.1, 1.17.1.3 and 1.15.1.7. |
| Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322. |
| pgjdbc is an open source postgresql JDBC Driver. From version 42.2.0 to before version 42.7.11, pgjdbc is vulnerable to a client-side denial of service during SCRAM-SHA-256 authentication. A malicious server can instruct the driver to perform SCRAM authentication with a very large iteration count. With a large enough value, the client spends an unbounded amount of CPU time inside PBKDF2 before authentication can fail. A single attempt ties up a CPU core. Repeated or concurrent attempts exhaust client CPU and can wedge connection pools. In affected versions, loginTimeout did not fully mitigate this problem. When loginTimeout expired, the caller could stop waiting, but the worker thread performing the connection attempt could continue running and burning CPU inside the SCRAM PBKDF2 computation. This issue has been patched in version 42.7.11. |
| A malicious SSH peer could send unsolicited global request responses to fill an internal buffer, blocking the connection's read loop. The blocked goroutine could not be released by calling Close(), resulting in a resource leak per connection. Unsolicited global responses are now discarded. |
| When an SSH server authentication callback returned PartialSuccessError with non-nil Permissions, those permissions were silently discarded, potentially dropping certificate restrictions such as force-command after a second factor succeeded. Returning non-nil Permissions with PartialSuccessError now results in a connection error. |
| The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege escalation in programs using the idna package. For example, a program which performs privilege checks on the ASCII hostname may reject "example.com" but permit "xn--example-.com". If that program subsequently converts the ASCII hostname to Unicode, it will inadvertently permits access to the Unicode name "example.com". |
| Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.14.0, using ``CookieJar.load()`` with untrusted input may allow arbitrary code execution. Most applications using this function will be doing so with the user's own data, so this is unlikely to affect many applications. Version 3.14.0 patches the issue. If an application does allow attacker controlled files to be loaded, a workaround on older releases would be to sanitize the files before loading. |
| OpenStack Glance before 29.1.1, 30.x before 30.1.1, and 31.0.0 is affected by Server-Side Request Forgery (SSRF). By use of HTTP redirects, an authenticated user can bypass URL validation checks and redirect to internal services. Only glance image import functionality is affected. In particular, the web-download and glance-download import methods are subject to this vulnerability, as is the optional (not enabled by default) ovf_process image import plugin. |
