| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A logic issue was addressed with improved restrictions. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. A malicious app may be able to break out of its sandbox. |
| Alkacon OpenCms before 16 allows XXE when the <!DOCTYPE> refers to an external host. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Don't expose sysfs attributes not applicable for VFs
VFs can't read BMG_PCIE_CAP(0x138340) register nor access PCODE
(already guarded by the info.skip_pcode flag) so we shouldn't
expose attributes that require any of them to avoid errors like:
[] xe 0000:03:00.1: [drm] Tile0: GT0: VF is trying to read an \
inaccessible register 0x138340+0x0
[] RIP: 0010:xe_gt_sriov_vf_read32+0x6c2/0x9a0 [xe]
[] Call Trace:
[] xe_mmio_read32+0x110/0x280 [xe]
[] auto_link_downgrade_capable_show+0x2e/0x70 [xe]
[] dev_attr_show+0x1a/0x70
[] sysfs_kf_seq_show+0xaa/0x120
[] kernfs_seq_show+0x41/0x60
(cherry picked from commit a2d6223d224f333f705ed8495bf8bebfbc585c35) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: dynevent: Add a missing lockdown check on dynevent
Since dynamic_events interface on tracefs is compatible with
kprobe_events and uprobe_events, it should also check the lockdown
status and reject if it is set. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: fix shift-out-of-bounds issue
Explicitly uses a 64-bit constant when the number of bits used for its
shifting is 32 (which is the case for PC CAN FD interfaces supported by
this driver).
[mkl: update subject, apply manually] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gma500: Fix null dereference in hdmi teardown
pci_set_drvdata sets the value of pdev->driver_data to NULL,
after which the driver_data obtained from the same dev is
dereferenced in oaktrail_hdmi_i2c_exit, and the i2c_dev is
extracted from it. To prevent this, swap these calls.
Found by Linux Verification Center (linuxtesting.org) with Svacer. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix potential null pointer dereference in afs_put_server
afs_put_server() accessed server->debug_id before the NULL check, which
could lead to a null pointer dereference. Move the debug_id assignment,
ensuring we never dereference a NULL server pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: check p->vec_buf for NULL
When the PAGEMAP_SCAN ioctl is invoked with vec_len = 0 reaches
pagemap_scan_backout_range(), kernel panics with null-ptr-deref:
[ 44.936808] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.937797] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 44.938391] CPU: 1 UID: 0 PID: 2480 Comm: reproducer Not tainted 6.17.0-rc6 #22 PREEMPT(none)
[ 44.939062] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.939935] RIP: 0010:pagemap_scan_thp_entry.isra.0+0x741/0xa80
<snip registers, unreliable trace>
[ 44.946828] Call Trace:
[ 44.947030] <TASK>
[ 44.949219] pagemap_scan_pmd_entry+0xec/0xfa0
[ 44.952593] walk_pmd_range.isra.0+0x302/0x910
[ 44.954069] walk_pud_range.isra.0+0x419/0x790
[ 44.954427] walk_p4d_range+0x41e/0x620
[ 44.954743] walk_pgd_range+0x31e/0x630
[ 44.955057] __walk_page_range+0x160/0x670
[ 44.956883] walk_page_range_mm+0x408/0x980
[ 44.958677] walk_page_range+0x66/0x90
[ 44.958984] do_pagemap_scan+0x28d/0x9c0
[ 44.961833] do_pagemap_cmd+0x59/0x80
[ 44.962484] __x64_sys_ioctl+0x18d/0x210
[ 44.962804] do_syscall_64+0x5b/0x290
[ 44.963111] entry_SYSCALL_64_after_hwframe+0x76/0x7e
vec_len = 0 in pagemap_scan_init_bounce_buffer() means no buffers are
allocated and p->vec_buf remains set to NULL.
This breaks an assumption made later in pagemap_scan_backout_range(), that
page_region is always allocated for p->vec_buf_index.
Fix it by explicitly checking p->vec_buf for NULL before dereferencing.
Other sites that might run into same deref-issue are already (directly or
transitively) protected by checking p->vec_buf.
Note:
From PAGEMAP_SCAN man page, it seems vec_len = 0 is valid when no output
is requested and it's only the side effects caller is interested in,
hence it passes check in pagemap_scan_get_args().
This issue was found by syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
kmsan: fix out-of-bounds access to shadow memory
Running sha224_kunit on a KMSAN-enabled kernel results in a crash in
kmsan_internal_set_shadow_origin():
BUG: unable to handle page fault for address: ffffbc3840291000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1810067 P4D 1810067 PUD 192d067 PMD 3c17067 PTE 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 81 Comm: kunit_try_catch Tainted: G N 6.17.0-rc3 #10 PREEMPT(voluntary)
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmsan_internal_set_shadow_origin+0x91/0x100
[...]
Call Trace:
<TASK>
__msan_memset+0xee/0x1a0
sha224_final+0x9e/0x350
test_hash_buffer_overruns+0x46f/0x5f0
? kmsan_get_shadow_origin_ptr+0x46/0xa0
? __pfx_test_hash_buffer_overruns+0x10/0x10
kunit_try_run_case+0x198/0xa00
This occurs when memset() is called on a buffer that is not 4-byte aligned
and extends to the end of a guard page, i.e. the next page is unmapped.
The bug is that the loop at the end of kmsan_internal_set_shadow_origin()
accesses the wrong shadow memory bytes when the address is not 4-byte
aligned. Since each 4 bytes are associated with an origin, it rounds the
address and size so that it can access all the origins that contain the
buffer. However, when it checks the corresponding shadow bytes for a
particular origin, it incorrectly uses the original unrounded shadow
address. This results in reads from shadow memory beyond the end of the
buffer's shadow memory, which crashes when that memory is not mapped.
To fix this, correctly align the shadow address before accessing the 4
shadow bytes corresponding to each origin. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: fix reference leak
Commit 20d72b00ca81 ("netfs: Fix the request's work item to not
require a ref") modified netfs_alloc_request() to initialize the
reference counter to 2 instead of 1. The rationale was that the
requet's "work" would release the second reference after completion
(via netfs_{read,write}_collection_worker()). That works most of the
time if all goes well.
However, it leaks this additional reference if the request is released
before the I/O operation has been submitted: the error code path only
decrements the reference counter once and the work item will never be
queued because there will never be a completion.
This has caused outages of our whole server cluster today because
tasks were blocked in netfs_wait_for_outstanding_io(), leading to
deadlocks in Ceph (another bug that I will address soon in another
patch). This was caused by a netfs_pgpriv2_begin_copy_to_cache() call
which failed in fscache_begin_write_operation(). The leaked
netfs_io_request was never completed, leaving `netfs_inode.io_count`
with a positive value forever.
All of this is super-fragile code. Finding out which code paths will
lead to an eventual completion and which do not is hard to see:
- Some functions like netfs_create_write_req() allocate a request, but
will never submit any I/O.
- netfs_unbuffered_read_iter_locked() calls netfs_unbuffered_read()
and then netfs_put_request(); however, netfs_unbuffered_read() can
also fail early before submitting the I/O request, therefore another
netfs_put_request() call must be added there.
A rule of thumb is that functions that return a `netfs_io_request` do
not submit I/O, and all of their callers must be checked.
For my taste, the whole netfs code needs an overhaul to make reference
counting easier to understand and less fragile & obscure. But to fix
this bug here and now and produce a patch that is adequate for a
stable backport, I tried a minimal approach that quickly frees the
request object upon early failure.
I decided against adding a second netfs_put_request() each time
because that would cause code duplication which obscures the code
further. Instead, I added the function netfs_put_failed_request()
which frees such a failed request synchronously under the assumption
that the reference count is exactly 2 (as initially set by
netfs_alloc_request() and never touched), verified by a
WARN_ON_ONCE(). It then deinitializes the request object (without
going through the "cleanup_work" indirection) and frees the allocation
(with RCU protection to protect against concurrent access by
netfs_requests_seq_start()).
All code paths that fail early have been changed to call
netfs_put_failed_request() instead of netfs_put_request().
Additionally, I have added a netfs_put_request() call to
netfs_unbuffered_read() as explained above because the
netfs_put_failed_request() approach does not work there. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tun: Update napi->skb after XDP process
The syzbot report a UAF issue:
BUG: KASAN: slab-use-after-free in skb_reset_mac_header include/linux/skbuff.h:3150 [inline]
BUG: KASAN: slab-use-after-free in napi_frags_skb net/core/gro.c:723 [inline]
BUG: KASAN: slab-use-after-free in napi_gro_frags+0x6e/0x1030 net/core/gro.c:758
Read of size 8 at addr ffff88802ef22c18 by task syz.0.17/6079
CPU: 0 UID: 0 PID: 6079 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
skb_reset_mac_header include/linux/skbuff.h:3150 [inline]
napi_frags_skb net/core/gro.c:723 [inline]
napi_gro_frags+0x6e/0x1030 net/core/gro.c:758
tun_get_user+0x28cb/0x3e20 drivers/net/tun.c:1920
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 6079:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:330 [inline]
__kasan_mempool_unpoison_object+0xa0/0x170 mm/kasan/common.c:558
kasan_mempool_unpoison_object include/linux/kasan.h:388 [inline]
napi_skb_cache_get+0x37b/0x6d0 net/core/skbuff.c:295
__alloc_skb+0x11e/0x2d0 net/core/skbuff.c:657
napi_alloc_skb+0x84/0x7d0 net/core/skbuff.c:811
napi_get_frags+0x69/0x140 net/core/gro.c:673
tun_napi_alloc_frags drivers/net/tun.c:1404 [inline]
tun_get_user+0x77c/0x3e20 drivers/net/tun.c:1784
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6079:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:243 [inline]
__kasan_slab_free+0x5b/0x80 mm/kasan/common.c:275
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2422 [inline]
slab_free mm/slub.c:4695 [inline]
kmem_cache_free+0x18f/0x400 mm/slub.c:4797
skb_pp_cow_data+0xdd8/0x13e0 net/core/skbuff.c:969
netif_skb_check_for_xdp net/core/dev.c:5390 [inline]
netif_receive_generic_xdp net/core/dev.c:5431 [inline]
do_xdp_generic+0x699/0x11a0 net/core/dev.c:5499
tun_get_user+0x2523/0x3e20 drivers/net/tun.c:1872
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
After commit e6d5dbdd20aa ("xdp: add multi-buff support for xdp running in
generic mode"), the original skb may be freed in skb_pp_cow_data() when
XDP program was attached, which was allocated in tun_napi_alloc_frags().
However, the napi->skb still point to the original skb, update it after
XDP process. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: Forbid FDB status change while nexthop is in a group
The kernel forbids the creation of non-FDB nexthop groups with FDB
nexthops:
# ip nexthop add id 1 via 192.0.2.1 fdb
# ip nexthop add id 2 group 1
Error: Non FDB nexthop group cannot have fdb nexthops.
And vice versa:
# ip nexthop add id 3 via 192.0.2.2 dev dummy1
# ip nexthop add id 4 group 3 fdb
Error: FDB nexthop group can only have fdb nexthops.
However, as long as no routes are pointing to a non-FDB nexthop group,
the kernel allows changing the type of a nexthop from FDB to non-FDB and
vice versa:
# ip nexthop add id 5 via 192.0.2.2 dev dummy1
# ip nexthop add id 6 group 5
# ip nexthop replace id 5 via 192.0.2.2 fdb
# echo $?
0
This configuration is invalid and can result in a NPD [1] since FDB
nexthops are not associated with a nexthop device:
# ip route add 198.51.100.1/32 nhid 6
# ping 198.51.100.1
Fix by preventing nexthop FDB status change while the nexthop is in a
group:
# ip nexthop add id 7 via 192.0.2.2 dev dummy1
# ip nexthop add id 8 group 7
# ip nexthop replace id 7 via 192.0.2.2 fdb
Error: Cannot change nexthop FDB status while in a group.
[1]
BUG: kernel NULL pointer dereference, address: 00000000000003c0
[...]
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:fib_lookup_good_nhc+0x1e/0x80
[...]
Call Trace:
<TASK>
fib_table_lookup+0x541/0x650
ip_route_output_key_hash_rcu+0x2ea/0x970
ip_route_output_key_hash+0x55/0x80
__ip4_datagram_connect+0x250/0x330
udp_connect+0x2b/0x60
__sys_connect+0x9c/0xd0
__x64_sys_connect+0x18/0x20
do_syscall_64+0xa4/0x2a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix slab-out-of-bounds in _parse_integer_limit()
When config osnoise cpus by write() syscall, the following KASAN splat may
be observed:
BUG: KASAN: slab-out-of-bounds in _parse_integer_limit+0x103/0x130
Read of size 1 at addr ffff88810121e3a1 by task test/447
CPU: 1 UID: 0 PID: 447 Comm: test Not tainted 6.17.0-rc6-dirty #288 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x610
kasan_report+0xb8/0xf0
_parse_integer_limit+0x103/0x130
bitmap_parselist+0x16d/0x6f0
osnoise_cpus_write+0x116/0x2d0
vfs_write+0x21e/0xcc0
ksys_write+0xee/0x1c0
do_syscall_64+0xa8/0x2a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
const char *cpulist = "1";
int fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, cpulist, strlen(cpulist));
Function bitmap_parselist() was called to parse cpulist, it require that
the parameter 'buf' must be terminated with a '\0' or '\n'. Fix this issue
by adding a '\0' to 'buf' in osnoise_cpus_write(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix null pointer dereference for ndev
In the TX completion packet stage of TI SoCs with CPSW2G instance, which
has single external ethernet port, ndev is accessed without being
initialized if no TX packets have been processed. It results into null
pointer dereference, causing kernel to crash. Fix this by having a check
on the number of TX packets which have been processed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp: Fix socket memory leak in TCP-AO failure handling for IPv6
When tcp_ao_copy_all_matching() fails in tcp_v6_syn_recv_sock() it just
exits the function. This ends up causing a memory-leak:
unreferenced object 0xffff0000281a8200 (size 2496):
comm "softirq", pid 0, jiffies 4295174684
hex dump (first 32 bytes):
7f 00 00 06 7f 00 00 06 00 00 00 00 cb a8 88 13 ................
0a 00 03 61 00 00 00 00 00 00 00 00 00 00 00 00 ...a............
backtrace (crc 5ebdbe15):
kmemleak_alloc+0x44/0xe0
kmem_cache_alloc_noprof+0x248/0x470
sk_prot_alloc+0x48/0x120
sk_clone_lock+0x38/0x3b0
inet_csk_clone_lock+0x34/0x150
tcp_create_openreq_child+0x3c/0x4a8
tcp_v6_syn_recv_sock+0x1c0/0x620
tcp_check_req+0x588/0x790
tcp_v6_rcv+0x5d0/0xc18
ip6_protocol_deliver_rcu+0x2d8/0x4c0
ip6_input_finish+0x74/0x148
ip6_input+0x50/0x118
ip6_sublist_rcv+0x2fc/0x3b0
ipv6_list_rcv+0x114/0x170
__netif_receive_skb_list_core+0x16c/0x200
netif_receive_skb_list_internal+0x1f0/0x2d0
This is because in tcp_v6_syn_recv_sock (and the IPv4 counterpart), when
exiting upon error, inet_csk_prepare_forced_close() and tcp_done() need
to be called. They make sure the newsk will end up being correctly
free'd.
tcp_v4_syn_recv_sock() makes this very clear by having the put_and_exit
label that takes care of things. So, this patch here makes sure
tcp_v4_syn_recv_sock and tcp_v6_syn_recv_sock have similar
error-handling and thus fixes the leak for TCP-AO. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix memory corruption when FW resources change during ifdown
bnxt_set_dflt_rings() assumes that it is always called before any TC has
been created. So it doesn't take bp->num_tc into account and assumes
that it is always 0 or 1.
In the FW resource or capability change scenario, the FW will return
flags in bnxt_hwrm_if_change() that will cause the driver to
reinitialize and call bnxt_cancel_reservations(). This will lead to
bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc
may be greater than 1. This will cause bp->tx_ring[] to be sized too
small and cause memory corruption in bnxt_alloc_cp_rings().
Fix it by properly scaling the TX rings by bp->num_tc in the code
paths mentioned above. Add 2 helper functions to determine
bp->tx_nr_rings and bp->tx_nr_rings_per_tc. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: sar: drop lockdep assertion in rtw89_set_sar_from_acpi
The following assertion is triggered on the rtw89 driver startup. It
looks meaningless to hold wiphy lock on the early init stage so drop the
assertion.
WARNING: CPU: 7 PID: 629 at drivers/net/wireless/realtek/rtw89/sar.c:502 rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core]
CPU: 7 UID: 0 PID: 629 Comm: (udev-worker) Not tainted 6.15.0+ #29 PREEMPT(lazy)
Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN50WW 09/27/2024
RIP: 0010:rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core]
Call Trace:
<TASK>
rtw89_sar_init+0x68/0x2c0 [rtw89_core]
rtw89_core_init+0x188e/0x1e50 [rtw89_core]
rtw89_pci_probe+0x530/0xb50 [rtw89_pci]
local_pci_probe+0xd9/0x190
pci_call_probe+0x183/0x540
pci_device_probe+0x171/0x2c0
really_probe+0x1e1/0x890
__driver_probe_device+0x18c/0x390
driver_probe_device+0x4a/0x120
__driver_attach+0x1a0/0x530
bus_for_each_dev+0x10b/0x190
bus_add_driver+0x2eb/0x540
driver_register+0x1a3/0x3a0
do_one_initcall+0xd5/0x450
do_init_module+0x2cc/0x8f0
init_module_from_file+0xe1/0x150
idempotent_init_module+0x226/0x760
__x64_sys_finit_module+0xcd/0x150
do_syscall_64+0x94/0x380
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure
Avoid potential NULL pointer dereference by checking the return value of
kmalloc and handling allocation failure properly. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: add a retry logic in net6_rt_notify()
inet6_rt_notify() can be called under RCU protection only.
This means the route could be changed concurrently
and rt6_fill_node() could return -EMSGSIZE.
Re-size the skb when this happens and retry, removing
one WARN_ON() that syzbot was able to trigger:
WARNING: CPU: 3 PID: 6291 at net/ipv6/route.c:6342 inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Modules linked in:
CPU: 3 UID: 0 PID: 6291 Comm: syz.0.77 Not tainted 6.16.0-rc7-syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Code: fc ff ff e8 6d 52 ea f7 e9 47 fc ff ff 48 8b 7c 24 08 4c 89 04 24 e8 5a 52 ea f7 4c 8b 04 24 e9 94 fd ff ff e8 9c fe 84 f7 90 <0f> 0b 90 e9 bd fd ff ff e8 6e 52 ea f7 e9 bb fb ff ff 48 89 df e8
RSP: 0018:ffffc900035cf1d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffc900035cf540 RCX: ffffffff8a36e790
RDX: ffff88802f7e8000 RSI: ffffffff8a36e9d4 RDI: 0000000000000005
RBP: ffff88803c230f00 R08: 0000000000000005 R09: 00000000ffffffa6
R10: 00000000ffffffa6 R11: 0000000000000001 R12: 00000000ffffffa6
R13: 0000000000000900 R14: ffff888032ea4100 R15: 0000000000000000
FS: 00007fac7b89a6c0(0000) GS:ffff8880d6a20000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fac7b899f98 CR3: 0000000034b3f000 CR4: 0000000000352ef0
Call Trace:
<TASK>
ip6_route_mpath_notify+0xde/0x280 net/ipv6/route.c:5356
ip6_route_multipath_add+0x1181/0x1bd0 net/ipv6/route.c:5536
inet6_rtm_newroute+0xe4/0x1a0 net/ipv6/route.c:5647
rtnetlink_rcv_msg+0x95e/0xe90 net/core/rtnetlink.c:6944
netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x58d/0x850 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: mark K1 pll1_d8 as critical
The pll1_d8 clock is enabled by the boot loader, and is ultimately a
parent for numerous clocks, including those used by APB and AXI buses.
Guodong Xu discovered that this clock got disabled while responding to
getting -EPROBE_DEFER when requesting a reset controller.
The needed clock (CLK_DMA, along with its parents) had already been
enabled. To respond to the probe deferral return, the CLK_DMA clock
was disabled, and this led to parent clocks also reducing their enable
count. When the enable count for pll1_d8 was decremented it became 0,
which caused it to be disabled. This led to a system hang.
Marking that clock critical resolves this by preventing it from being
disabled.
Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to
be supplied for a CCU_FACTOR_GATE clock. |
