| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - bound the device-reported force-feedback effect index
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: elan_i2c - prevent division by zero and arithmetic underflow
The Elan I2C touchpad driver queries the device for its physical
dimensions and trace counts to calculate the device resolution and width.
However, if the device firmware or device tree provides invalid zero
values for x_traces or y_traces, it results in a fatal division-by-zero
exception leading to a kernel panic during device probe.
Add checks to ensure these parameters are non-zero before performing
the division. If invalid trace values are detected, fall back to a safe
default of 1.
Additionally, prevent an arithmetic underflow in the touch reporting
logic. Previously, if the calculated or fallback width was smaller than
ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a
massive unsigned integer being reported to userspace. Clamp the adjusted
width to a minimum of 0 to safely handle small physical dimensions and
fallback scenarios.
Completing the probe with safe fallback values ensures the sysfs nodes
are created, keeping the firmware update path intact so a recovery
firmware can be flashed to the device. |
| A flaw has been found in GL-iNet GL-MT3000 up to 4.4.5. This vulnerability affects the function plugins.remove_package/plugins.install_package of the file /cgi-bin/glc of the component plugins.so Native Plugin. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. |
| In wlan STA FW, there is a possible system becoming unresponsive due to logging. This could lead to remote (proximal/adjacent) denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00486814; Issue ID: MSV-6824. |
| A security flaw has been discovered in osCommerce 4.14.63493. Affected by this issue is the function EmailController of the file app/lib/backend/controllers/EmailController.php of the component Email Template Configuration. Performing a manipulation of the argument email_templates_key results in sql injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| better-auth before 1.6.13 (and pre-release builds 1.7.0-beta.0 through 1.7.0-beta.3) fail to validate the scheme of redirect_uris registered via the deprecated oidc-provider plugin and the mcp plugin (which wraps the same provider). An attacker can register an OAuth client with a javascript: redirect_uri, which the authorization server later returns unchanged in the consent response. If the deployment's consent page navigates the browser to the returned redirectURI (e.g. assigning it to window.location.href), the attacker's JavaScript executes in the authorization-server origin, exposing the victim's session and enabling account takeover. |
| GitPython before 3.1.51 fails to guard against dangerous Git options passed as keyword arguments in Repo.archive() and git.ls_remote(), allowing command injection via options such as --exec/--upload-pack (leading to arbitrary command execution). Additionally, Repo.iter_commits() and Repo.blame() do not check for leading-dash revision arguments, so a revision like --output=<path> can cause Git to open and truncate an arbitrary file. Exploitation requires an application that passes attacker-controlled arguments to these methods. |
| axios versions >=1.13.0 (Node.js HTTP adapter) fail to enforce the configured maxBodyLength limit on streamed request bodies when requests are sent with httpVersion: 2. Because Node's HTTP/2 request API does not honor the maxBodyLength option and axios's byte-counting stream wrapper is gated on maxRedirects === 0, an attacker who controls a stream passed to axios can cause the application to transmit outbound data exceeding the configured finite maxBodyLength. Impact is limited to resource consumption and policy bypass (excess egress, upstream quota consumption, limited availability); it does not enable code execution, credential disclosure, or request-destination control. Calls using the default maxBodyLength: -1 and browser adapters are not affected. |
| Key exchange without entity authentication in the EMR SSH helper commands in Amazon AWS CLI before 1.45.28 and AWS CLI v2 before 2.35.3 might allow man-in-the-middle attackers to intercept SSHsessions and file transfers via network positioning between the client and the EMR cluster endpoint.
To remediate this issue, users should upgrade to AWS CLI v1 1.45.28 or later, or AWS CLI v2 2.35.3 or later. |
| ArcadeDB versions before 26.7.2 fail to properly redact the cluster token in the GET /api/v1/server endpoint, allowing authenticated users to retrieve the arcadedb.ha.clusterToken value in cleartext. Attackers can use the leaked token with X-ArcadeDB-Cluster-Token and X-ArcadeDB-Forwarded-User headers to impersonate root and execute administrative actions including user creation, database operations, and server shutdown. |
| guzzlehttp/guzzle versions before 7.15.1 fail to preserve host-only cookie scope, storing the request host in the Domain field instead of marking cookies as host-only. Attackers controlling child hosts can receive host-only cookies intended only for parent hosts, potentially disclosing session identifiers and authorization tokens when the same cookie jar is reused across trust boundaries. |
| JupyterLab before 4.5.9 contains a stored cross-site scripting vulnerability in the Extension Manager that fails to validate URI protocols in package metadata URLs. Attackers can publish malicious PyPI packages with javascript: URLs in project metadata that execute arbitrary JavaScript in the JupyterLab origin when users click the extension name. |
| In display, there is a possible escalation of privilege due to a race condition. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11019183; Issue ID: MSV-7758. |
| Wazuh workflows before 44bf114 contain a shell injection vulnerability in GitHub Actions that allows attackers to execute arbitrary commands by submitting pull requests with crafted VERSION.json files. Attackers can inject shell metacharacters into environment variables that are directly interpolated into run steps, enabling command execution and exfiltration of secrets including GITHUB_TOKEN and AWS credentials on self-hosted runners. |
| @fastify/aws-lambda version 6.4.0 decorates each Fastify request with request.awsLambda.event and request.awsLambda.context, values that applications are documented to use for authorization decisions such as reading API Gateway authorizer claims. In the default configuration, the getter that populates this decoration reads the client-controlled x-apigateway-event and x-apigateway-context HTTP headers before falling back to the trusted internal request token, and those reserved headers are not stripped from the incoming event. An unauthenticated attacker who can set a single HTTP header can therefore forge the entire Lambda proxy event, including the authorizer context, and override the genuine one. This results in a full authentication and authorization bypass and privilege escalation for any application that trusts request.awsLambda.event for identity or access control. Only version 6.4.0 is affected. Patches: upgrade to @fastify/aws-lambda 6.4.1, which resolves the decoration only through the internal per-invocation token and strips the reserved headers before the request is processed. |
| Deserialization of untrusted data vulnerability in TUBITAK BILGEM Software Technologies Research Institute eta-otp-lock allows Object Injection.
This issue affects eta-otp-lock: before 1.0.4. |
| osTicket 1.18.3 generates API keys using a predictable construction based on MD5 hashing. The use of MD5, combined with predictable inputs such as the current timestamp and client IP address, significantly reduces entropy. An attacker can approximate the key generation time and brute-force the key space within a feasible time window. |
| A stored cross-site scripting (XSS) vulnerability exists in osTicket 1.18.3 due to improper sanitization of the thread entry title field. User-controlled input in the title is stored without adequate HTML escaping and later rendered in multiple staff-facing templates without proper output encoding. An attacker can inject arbitrary JavaScript by submitting a crafted ticket reply or email with a malicious subject line. |
| better-auth versions greater than 1.3.34 and before 1.4.0 contain a vulnerability in the multi-session plugin's /sign-out after-hook, which trusts raw multi-session cookies and forwards extracted values to internalAdapter.deleteSessions without verifying the cookie signature (e.g., via getSignedCookie). An attacker can supply a forged _multi-* cookie to trigger deletion of arbitrary session tokens. |
| osTicket v1.18.3 is vulnerable to Stored Cross-Site Scripting (XSS) via the email From-header display name. The value is extracted without sanitization in include/class.mailparse.php and stored raw in the poster field of ost_thread_entry. When an unauthenticated attacker sends a reply email to an existing ticket from an unregistered address with an XSS payload in the From display name. |
