| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Pillow is a Python imaging library. From 9.1.0 until 13.0.0, Pillow can disclose uninitialized stack memory when Image.quantize() uses an empty palette. ImagingPaletteCacheUpdate() leaves a local cache array uninitialized when the palette has zero entries, and the conversion path emits those bytes as output pixel indices. An attacker who controls the palette image can obtain stack contents from a returned PNG or GIF. This can disclose addresses and stack-canary data without an out-of-bounds access, memory corruption, or process crash. This issue is fixed in version 13.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipconfig: bound DHCP option construction
ic_dhcp_init_options() appends the hostname (option 12), vendor-class
(option 60) and client-ID (option 61) options into the fixed 312-byte
bootp_pkt.exten[] buffer. Only the client-ID branch checked the
remaining space; the hostname and vendor-class writes were unbounded.
A 64-byte hostname together with the maximum 252-byte dhcpclass=
identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available
bytes even before the terminating END marker, so the vendor-class memcpy
runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is
reported as a field-spanning write and, when the kernel is booted with
panic_on_warn=1, aborts boot with a panic.
Route the optional options through a common helper that makes sure the
option, its 2-byte header and the END marker all fit and drops an option
that would not. Configurations with short options keep sending exactly
the same bytes as before. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range cmb_tpd_next_to_clean (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. Treat it as
"nothing new to clean" instead. |
| Deserialization of Untrusted Data vulnerability in VillaTheme AFFI – Affiliate Marketing for WooCommerce affi-affiliate-marketing-for-woo allows Object Injection.This issue affects AFFI – Affiliate Marketing for WooCommerce: from n/a through 1.0.10. |
| phpMyFAQ from 4.1.0 before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains a missing authorization vulnerability in the admin dashboard that allows authenticated users without admin rights to view restricted data. Attackers with any activated account can request /admin/index.php/ to read unpublished FAQ questions, admin edit URLs, recent user identities, and site statistics. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: bound the ATA passthru sense descriptor writes
When an ATA PASS-THROUGH command to an ATAPI device fails, the sense
buffer holds the device's REQUEST SENSE reply, and
ata_scsi_set_passthru_sense_fields() trusts its additional length
byte, sb[7], when adding the ATA Status Return descriptor. A faulty
or malicious device can use that to make the kernel read and write
past the 96-byte buffer in three ways:
- scsi_sense_desc_find() is passed sb[7] + 8 as the buffer length, so
its clamp against sb[7] does nothing and the walk runs off the end.
- A type-9 descriptor found near the end is filled in unchecked.
- A new descriptor at sb[8 + len] needs len + 22 bytes, not len + 14,
so len 75..82 writes up to 8 bytes past the end.
Reproduced with KASAN under qemu, with the emulated ATAPI REQUEST SENSE
reply patched:
BUG: KASAN: slab-out-of-bounds in scsi_sense_desc_find+0x1a5/0x210
BUG: KASAN: slab-out-of-bounds in ata_scsi_qc_complete+0x1a15/0x1a50
Both are gone with this patch, and a valid descriptor is still filled
in. |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: fix integer overflow in prb_calc_retire_blk_tmo()
prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic:
mbits = (blk_size_in_bytes * 8) / (1024 * 1024);
If I'm reading the validation right, tp_block_size is user
controlled and packet_set_ring() only rejects values that are <= 0
as int or not page aligned, so a 256MiB block goes right through
(and alloc_one_pg_vec_page() even has a vzalloc fallback for it).
0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps
(div == 1) the function ends up returning -2047.
The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1,
so the trigger set is [256,512), [768,1024), [1280,1536) and
[1792,2048) MiB. Other sizes wrap to non-negative values and faster
links divide the unsigned value back below 2^31, which is why this
doesn't blow up for everyone.
What makes it fatal is what happens next in init_prb_bdqc():
p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...));
hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime,
HRTIMER_MODE_REL_SOFT);
A negative relative timeout expires immediately. The callback
unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns
the negative interval into hrtimer_resolution:
if (interval < hrtimer_resolution)
interval = hrtimer_resolution;
So the SOFT timer re-fires at the maximum rate forever, holding
sk_receive_queue.lock each pass. One CPU spins in softirq until the
socket is closed. Repeat with more rings and the machine is gone.
The overflow itself is ancient - it was introduced together with
TPACKET_V3 in f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer
implementation."). Its effect prior to f7460d2989fa ("net:
af_packet: Use hrtimer to do the retire operation", v6.18) was not
as clear-cut, though: the return value was stored into an unsigned
short retire_blk_tov, so a negative result was truncated, and a
0-jiffy delay loop could be programmed as well. Neither is nearly
as detrimental as the immediate maximum-rate spin the hrtimer
conversion turned it into.
(Unrelated to CVE-2019-20812 - that one was the ethtool failure path
returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.)
Reproducer, needs CAP_NET_RAW (a --network host container has it by
default) and a 1 Gbps NIC (QEMU e1000 works):
int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
bind(fd, ...);
int v = TPACKET_V3;
setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v));
struct tpacket_req3 req = {
.tp_block_size = 0x10000000,
.tp_block_nr = 1,
.tp_frame_size = 2048,
.tp_frame_nr = 0x10000000 / 2048,
.tp_retire_blk_tov = 0,
};
setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req));
Compute in 64 bits instead. The operands are already bounded by the
existing validation, so nothing else changes. If you'd prefer a
different fix, just say so and I'll respin. |
| Double free in Windows Internet Information Services allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix races in Tx timestamp handling
wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary
worker and the timestamp cleanup paths. The
WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from
submitting timestamp requests, but does not serialize the worker
against cleanup.
As a result, wx_ptp_clear_tx_timestamp() can free an skb after
wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may
then pass the freed skb to skb_tstamp_tx() and release the same
reference again.
The cleanup path may also clear the in-progress bit while the worker
is still processing the old skb. This allows the Tx path to publish a
new skb which the worker can subsequently overwrite with NULL,
leaking its reference.
Add a dedicated spinlock to protect publication and consumption of
the Tx timestamp skb. Detach the skb and clear the in-progress bit
while holding the lock, then deliver the timestamp and release the skb
after dropping it. Use the same locked cleanup in the quiesce path,
but keep the detach there free of register accesses: quiesce runs
during PCIe error recovery, where MMIO is not reliable, and it
deliberately did not touch the device before. The lock is taken with
interrupts disabled, because netpoll can call ndo_start_xmit() with
hard interrupts already off.
When handling a Tx DMA mapping failure, keep the transmit path
reference until after comparing the skb under the lock. This prevents
skb address reuse from making the error path mistake a newer timestamp
request for the failed one. |
| SENAYAN Library Management System (SLiMS) Bulian (slims9_bulian) 9.8.0 is vulnerable to SQL Injection in admin/modules/reporting/customs/dl_detail.php via the parameter fileID. |
| Dell Application Store, versions prior to 26.05.0.7, contain a Missing Authentication for Critical Function vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to arbitrary code execution. |
| Summary
Before version 0.9.0, Pingora accepted HTTP/2 requests whose Host header differed from the :authority pseudo-header. Request filters, cache keys, and logs that read the request URI (session.req_header().uri) saw the :authority value, but the upstream received the client-supplied Host value. Pingora also accepted :authority values containing userinfo (for example, user@example.com). This violates RFC 9113 Section 8.3.1, which requires an intermediary to use the :authority value for Host and replace any existing Host field.
Root cause
*
HTTP/2 to HTTP/1.1: Host was generated from :authority only when the request had no Host header, so a conflicting client Host was forwarded unchanged.
*
HTTP/2 to HTTP/2: the client Host header was removed and used to overwrite the upstream :authority, after request filters had already run against the original :authority.
*
The HTTP/2 server did not compare Host with :authority and did not reject userinfo in the authority.
Impact
A remote, unauthenticated attacker can send a single HTTP/2 request that the application sees as one host and the upstream receives as another. Where request filters, access controls, or cache keys use the URI authority and the upstream routes by Host, this can lead to:
*
Cache poisoning: a response from another virtual host is stored under the victim host's cache key and served to other users (this also requires the upstream to serve different content per Host).
*
Host-based access control bypass: a request approved for one host is served by a different virtual host on the upstream.
Deployments that do not accept HTTP/2 from clients, or that do not use the request authority for security or caching decisions, are not affected.
Note that Cloudflare CDN customers were unaffected, as internal Pingora services at Cloudflare do not have HTTP/2 clients.
Mitigation:
*
Upgrade to pingora 0.9.0 or later. Pingora now returns 400 Bad Request for HTTP/2 requests whose Host differs from :authority, that contain more than one Host, or whose authority contains userinfo, and keeps the upstream Host or :authority consistent with the request authority. Fix commits: https://github.com/cloudflare/pingora/commit/915590a91811877795531f6ba0927a3138b5cb4b , https://github.com/cloudflare/pingora/commit/ffab8302d08d4292d1924eb8fe84647fd5cb8e76
*
If you cannot upgrade: in request_filter, reject HTTP/2 requests that carry a Host header different from the URI authority, or whose authority contains '@'. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix UAF on lgr list traversal in smcr_port_err()
smcr_port_err() traverses smc_lgr_list.list without holding
smc_lgr_list.lock, allowing a concurrent smc_lgr_terminate_sched()
to free an lgr while it is still being dereferenced.
Hold smc_lgr_list.lock across the traversal. Update
smc_ib_gid_check() to call smcr_port_err() after releasing the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mt7530: fix NULL dereference on unbind of MT7531 and MT7621
The core and io supplies are only requested for ID_MT7530: both the
devm_regulator_get() in probe and the regulator_enable() in
mt7530_setup() are guarded by the switch id, but mt7530_remove()
disables them unconditionally. On an MT7621 or an MT7531 both pointers
are still NULL from devm_kzalloc(), so rmmod or a sysfs unbind calls
regulator_disable() on NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xps: reject an out of range traffic class
Only the entries below dev->num_tc are valid in dev->tc_to_txq[], and
dev->prio_tc_map[] may only name classes below it. netdev_set_num_tc()
lowers dev->num_tc without touching either array.
netdev_txq_to_tc() walks all TC_MAX_QUEUE slots and
netdev_get_prio_tc_map() returns the entry as it stands, so a leftover
entry is handed out as a traffic class >= dev->num_tc. Taking that
class from netdev_txq_to_tc(), __netif_set_xps_queue() rejects only a
negative one and indexes an XPS map sized for dev->num_tc classes:
tci = j * num_tc + tc;
RCU_INIT_POINTER(new_dev_maps->attr_map[tci], map);
attr_map[] holds nr_ids * num_tc entries and j runs over the ids named
in the mask, so a class that is not below num_tc pushes tci past the end
of the map for the last ids and the store overruns it.
Any caller that lowers num_tc leaves such entries behind, and
mqprio_destroy() tears down with netdev_set_num_tc(dev, 0) rather than
netdev_reset_tc(). After mqprio with 8 classes then 1, tc_to_txq[1..7]
still describe txq 1..7. The splat is from an XPS write to txq 2 on a
veth with 8 rx queues: attr_map[] has 8 * 1 entries, tci = j + 2, and
j == 6 stores one past the end of the 88-byte map:
BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue (net/core/dev.c:2954)
Write of size 8 at addr ffff88813016bc58 by task xps_oob/634
__netif_set_xps_queue (net/core/dev.c:2954)
xps_rxqs_store (net/core/net-sysfs.c:1880)
netdev_queue_attr_store (net/core/net-sysfs.c:1390)
Allocated by task 634:
__kmalloc_noprof (mm/slub.c:5439)
__netif_set_xps_queue (net/core/dev.c:2937)
The buggy address is located 0 bytes to the right of
allocated 88-byte region [ffff88813016bc00, ffff88813016bc58)
Reject a class the map has no room for. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: set new_stream to NULL after release
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
(cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28) |
| The Academy LMS – AI Course Builder, Quizzes, Certificates & eLearning plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.0.3. This is due to the `add_child()` function calling `add_role('academy_student')` on any existing account resolved from the attacker-supplied `email` parameter before `Store::link()` validates the guardian-ward relationship, and failing to roll back that role write when `Store::link()` returns a `WP_Error`. This makes it possible for authenticated attackers with the `academy_guardian` role or higher to elevate any existing WordPress account — including their own — to the `academy_student` role, gaining `edit_posts` (Contributor-equivalent) capabilities and, when the student file-upload setting is enabled, `upload_files` (Author-equivalent) capabilities not granted to the guardian role. When a guardian supplies their own email address, `email_exists()` resolves to their own user ID, causing `Store::link()` to reject the self-link, but because the `add_role()` call has already executed and is never reversed, the academy_student role grant on their own account persists permanently. |
| The Getwid – Gutenberg Blocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'data-image-points' parameter in all versions up to, and including, 3.0.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: hold IPsec RX state under the XArray lock
nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the
xfrm_state it found. The delete path can erase the entry and drop the last
state reference in that interval. RX can then try to increment a zero
refcount after the state has been queued for destruction.
The driver queues firmware invalidation asynchronously; the delete path
does not wait for the command to complete or drain pending RX processing.
The XFRM garbage collector waits for an RCU grace period before freeing
the state. That delays reclamation but does not make acquiring a reference
from zero valid.
Take the xfrm_state reference before releasing the XArray lock so
xa_erase() cannot run between lookup and reference acquisition. |
