Export limit exceeded: 399347 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399347 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97948 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: Fix recursive locking on devices without EEH sensitive driver The commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") refactored the EEH code such that the pci_rescan_remove_lock is held at the beginning of eeh_handle_normal_event() and the eeh_reset_device() is called with that lock being held. Looks like the commit missed to remove the existing lock/unlock inside eeh_rmv_device() which is no longer necessary. This is causing the eehd to hang on the lock which it actually holds when that code path is taken. [<0>] 0xc00000011c78f870 [<0>] __switch_to+0xfc/0x1a0 [<0>] pci_lock_rescan_remove+0x30/0x44 [<0>] eeh_rmv_device+0x290/0x2e0 [<0>] eeh_pe_dev_traverse+0x80/0x130 [<0>] eeh_reset_device+0xcc/0x23c [<0>] eeh_handle_normal_event+0x830/0xa80 [<0>] eeh_event_handler+0xf8/0x190 [<0>] kthread+0x194/0x1b0 [<0>] start_kernel_thread+0x14/0x18 The issue is seen for cases where the errors are detected on the PHB directly AND|OR for devices where the driver error_detected() returns PCI_ERS_RESULT_NEED_RESET, and driver being not EEH sensitive(i.e no error handlers like slot_reset(), resume() etc defined). | ||||
| CVE-2026-97957 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates that seq_id does not exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed MBOX_SEG_LEN (48). However, this allows the last segment (seq_id=42) to carry a full 48-byte payload, writing to offset 42*48=2016 for 48 bytes (ending at byte 2064). The receive buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a 16-byte heap buffer overflow. The hinic3 driver already handles this correctly by defining MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it exceeds the remaining buffer space. Apply the same fix to the hinic driver. | ||||
| CVE-2026-97961 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Allow list_del during perf_event_overflow() A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec() interface to get the PMU call back function pmu::sched_task invoked at schedule in and schedule out. This is achieved by walking along the list anchored by sched_cb_list. The following scenario might lead to a list corruption. perf_pmu_sched_task() for_each_list_entry(..., &sched_cb_list) +--> __perf_pmu_sched_task() +--> event->pmu->sched_task()) +--> PMU_push_sample() +--> perf_event_overflow() +--> __perf_event_overflow() +--> pmu->stop() +--> perf_sched_cb_dec() remove entry from sched_cb_list while list node in use. This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been invoked and perf_event::event_limit hits zero. Prevent the list corruption and convert for_each_list_entry() to for_each_list_entry_safe(). | ||||
| CVE-2026-97962 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Move representor vnic reporter to eswitch devlink port The representor vnic devlink health reporter is created and destroyed along the representor netdev (un)load path, which is not serialized by the devlink instance lock. Destroying the reporter from there triggers a devl_assert_locked() splat on driver unbind: WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758 Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ... CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ... RIP: 0010:devl_assert_locked+0x54/0x70 Call Trace: <TASK> devl_health_reporter_destroy+0x3a/0x1b0 mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core] mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core] ? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core] ? kernfs_remove_by_name_ns+0xc3/0xf0 device_release_driver_internal+0x3b2/0x560 unbind_store+0xce/0xf0 Move the reporter's lifecycle to the eswitch devlink port (un)register paths, which are already serialized by the devlink instance lock, and store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the reporter priv since the diagnose callback only needs a device handle and a vport number, and mlx5_vport carries both and is initialized before any representor driver probes. | ||||
| CVE-2026-97971 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nstree: check listing permission before taking a namespace reference legitimize_ns() takes a reference on the candidate namespace before may_list_ns() has decided whether the caller may see it. The __free(ns_put) cleanup on the denied path can drop the last reference to a mount namespace while we still hold the rcu read lock, and put_mnt_ns() may sleep there. This is the same problem commit 2ec2aff3c8e2 ("ns: make sure reference are dropped outside of rcu lock") fixed for the put_user() path. Neither ns_requested() nor may_list_ns() needs a reference, both only look at the namespace type and at the caller's own namespaces, so do the checks first and take the reference last. Splat: Voluntary context switch within RCU read-side critical section! WARNING: kernel/rcu/tree_plugin.h:332 at rcu_note_context_switch+0x238/0x2a0, CPU#5: a/3442 CPU: 5 UID: 1000 PID: 3442 Comm: a Not tainted 7.0.0-30-generic #30-Ubuntu PREEMPT(lazy) RIP: 0010:rcu_note_context_switch+0x238/0x2a0 Call Trace: <TASK> __schedule+0xcf/0x650 schedule+0x27/0x90 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 exp_funnel_lock+0xb2/0x260 synchronize_rcu_expedited+0xe7/0x220 namespace_unlock+0x26a/0x320 put_mnt_ns+0xd3/0x120 mntns_put+0xe/0x20 do_listns+0x13e/0x560 __do_sys_listns+0x126/0x2d0 __x64_sys_listns+0x20/0x30 x64_sys_call+0x2366/0x2390 do_syscall_64+0x105/0x5a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> | ||||
| CVE-2026-97972 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: put the "mdio" child node reference on success macb_mii_init() holds the reference returned by of_get_child_by_name() for macb_mdiobus_register() and drops it only on the error paths, so every successful probe leaks a node reference. On a CM5, overlay removal after four bind cycles reports OF: ERROR: memory leak, expected refcount 1 instead of 5 Drop the reference after registration, where __mdiobus_register() has already taken its own for the lifetime of the bus. | ||||
| CVE-2026-97981 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Count dropped frames as NAPI work The RX loop only consumes budget when it successfully delivers a frame. Error paths keep consuming descriptors without reducing the budget, so a stream of bad frames can process the entire receive ring in one poll. Move the budget accounting to a common end-of-frame path. This counts each completed frame as NAPI work whether it was delivered or dropped, matching the behavior of the vendor driver. | ||||
| CVE-2026-97987 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio_input: reset device if input_register_device() fails Probe marks the device DRIVER_OK with virtio_device_ready() before calling input_register_device(). If registration fails, the error path cleared vi->ready and called del_vqs() while the device was still live, so the device could keep DMA to queues that were already torn down. Match remove/freeze: call virtio_reset_device() on that path before tearing down the virtqueues. | ||||
| CVE-2026-100072 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: platform: Use acpi_bus_get_primary_device() The acpi_get_first_physical_node() usage in acpi_platform_fill_resource() and acpi_create_platform_device() is generally unsafe because in theory the device returned by it may be freed at any time [1]. It is also inefficient because acpi_get_first_physical_node() is called multiple times for the same argument which can be avoided. Address these issues by using acpi_bus_get_primary_device() instead of acpi_get_first_physical_node() and adjusting the code to call it just once at the beginning of and acpi_create_platform_device() and drop the device reference acquired by it upon the return from that function. | ||||
| CVE-2026-97564 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.idmap descriptions cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields without CIFS origin. A request_key(2) call with a non-NULL callout then drives a root usermodehelper upcall (/sbin/request-key -> cifs.idmap) that consumes the unvetted description in root context. Only accept cifs.idmap descriptions while CIFS is using its private root_cred to request the key. id_to_sid()/sid_to_id() already run under override_creds(root_cred), so the kernel-originated path is unaffected. This mirrors commit 3da1fdf4efbc ("smb: client: reject userspace cifs.spnego descriptions"), which applied the same restriction to cifs.spnego. | ||||
| CVE-2026-100074 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_refcount field as unique BPF_REFCOUNT is not marked as a unique field, while it should be. Fix this oversight. | ||||
| CVE-2026-100077 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Recover HW before retire hung submit During recovery, it is not safe to retire the hung submit before we recover the GPU. Retiring the submit triggers BO free and that can result in GPU pagefaults since the GPU may be actively accessing those BOs. To fix this, retire the submits after gpu recovery is complete in recover_worker(). Patchwork: https://patchwork.freedesktop.org/patch/730655/ | ||||
| CVE-2026-97588 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly When hardware persistently returns -EBUSY after exhausting retries, the error propagates to crypto_finalize_*_request(). The crypto API's completion wrapper treats -EBUSY as a queueing status and swallows it, preventing the completion callback from firing. This causes callers using crypto_wait_req() to block indefinitely. Translate persistent -EBUSY to -EIO after retry exhaustion to ensure proper error propagation and callback invocation. | ||||
| CVE-2026-75658 | 1 Adobe | 2 Adobe Bridge, Bridge | 2026-09-25 | 7.8 High |
| Bridge is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-75663 | 1 Adobe | 2 Adobe Bridge, Bridge | 2026-09-25 | 7.8 High |
| Bridge is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-75665 | 1 Adobe | 2 Adobe Bridge, Bridge | 2026-09-25 | 7.8 High |
| Bridge is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-75676 | 1 Adobe | 2 Adobe Bridge, Bridge | 2026-09-25 | 7.8 High |
| Bridge is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-98144 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: put the chained BO when its mapping fails amdxdna_cmd_set_error() looks up the first BO of a command chain, which takes a reference, and drops it at the end of the function. The mapping of that BO is established in between, and the failure path returns without the put, so the reference is leaked. Ordinary use does not reach it. The chain has been submitted before any of this runs, so aie2_cmdlist_fill_slot() has already called amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its address. What makes it reachable is that the BO is resolved again by handle here, and the handle is userspace's to recycle: closing it after submission and importing a dma-buf whose exporter implements no vmap onto the same id leaves amdxdna_gem_get_obj() returning an object this cannot map, since prime_import() types every import AMDXDNA_BO_SHARE. | ||||
| CVE-2026-98149 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix percpu map update indexing with sparse CPU IDs Per-CPU array, hash, and cgroup storage map updates without BPF_F_CPU or BPF_F_ALL_CPUS use a value buffer whose per-CPU slots are packed in possible-CPU order. The buffer is sized as: round_up(value_size, 8) * num_possible_cpus() The update paths iterate over possible CPUs, but use the logical CPU ID to calculate the source offset: value + size * cpu This only works when possible CPU IDs are contiguous starting at zero. For example, with a possible CPU mask of 0,2-3, the buffer contains three slots corresponding to CPUs 0, 2, and 3. CPU2 is therefore expected to use slot 1 and CPU3 slot 2. Instead, the current code uses slots 2 and 3 respectively, causing incorrect per-CPU values and an out-of-bounds read from the update buffer for CPU3. The corresponding lookup paths already use a dense offset while iterating over possible CPUs. Do the same for the array, hash, and cgroup storage update paths, advancing the source offset once for each possible CPU. BPF_F_ALL_CPUS continues to use the same value for every CPU. | ||||
| CVE-2026-97897 | 1 Krayin | 1 Laravel-crm | 2026-09-25 | 3.5 Low |
| A security flaw has been discovered in Krayin laravel-crm up to 2.2.5. This issue affects some unknown processing of the file Sanitizer.php of the component TinyMCE Media Upload. The manipulation results in cross site scripting. The attack may be performed from remote. Upgrading to version 2.2.6 is capable of addressing this issue. The patch is identified as 734aa10ae6c2ffa4c96c8869a89aa66940e4d345. You should upgrade the affected component. | ||||