Total
34008 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-36950 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2025-12-17 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: mask bus reset interrupts between ISR and bottom half In the FireWire OHCI interrupt handler, if a bus reset interrupt has occurred, mask bus reset interrupts until bus_reset_work has serviced and cleared the interrupt. Normally, we always leave bus reset interrupts masked. We infer the bus reset from the self-ID interrupt that happens shortly thereafter. A scenario where we unmask bus reset interrupts was introduced in 2008 in a007bb857e0b26f5d8b73c2ff90782d9c0972620: If OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we will unmask bus reset interrupts so we can log them. irq_handler logs the bus reset interrupt. However, we can't clear the bus reset event flag in irq_handler, because we won't service the event until later. irq_handler exits with the event flag still set. If the corresponding interrupt is still unmasked, the first bus reset will usually freeze the system due to irq_handler being called again each time it exits. This freeze can be reproduced by loading firewire_ohci with "modprobe firewire_ohci debug=-1" (to enable all debugging output). Apparently there are also some cases where bus_reset_work will get called soon enough to clear the event, and operation will continue normally. This freeze was first reported a few months after a007bb85 was committed, but until now it was never fixed. The debug level could safely be set to -1 through sysfs after the module was loaded, but this would be ineffectual in logging bus reset interrupts since they were only unmasked during initialization. irq_handler will now leave the event flag set but mask bus reset interrupts, so irq_handler won't be called again and there will be no freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will unmask the interrupt after servicing the event, so future interrupts will be caught as desired. As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be enabled through sysfs in addition to during initial module loading. However, when enabled through sysfs, logging of bus reset interrupts will be effective only starting with the second bus reset, after bus_reset_work has executed. | ||||
| CVE-2024-36964 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/9p: only translate RWX permissions for plain 9P2000 Garbage in plain 9P2000's perm bits is allowed through, which causes it to be able to set (among others) the suid bit. This was presumably not the intent since the unix extended bits are handled explicitly and conditionally on .u. | ||||
| CVE-2018-7602 | 2 Debian, Drupal | 2 Debian Linux, Drupal | 2025-12-17 | 9.8 Critical |
| A remote code execution vulnerability exists within multiple subsystems of Drupal 7.x and 8.x. This potentially allows attackers to exploit multiple attack vectors on a Drupal site, which could result in the site being compromised. This vulnerability is related to Drupal core - Highly critical - Remote Code Execution - SA-CORE-2018-002. Both SA-CORE-2018-002 and this vulnerability are being exploited in the wild. | ||||
| CVE-2025-43471 | 1 Apple | 2 Macos, Macos Tahoe | 2025-12-16 | 5.5 Medium |
| The issue was addressed with improved checks. This issue is fixed in macOS Tahoe 26.1. An app may be able to access sensitive user data. | ||||
| CVE-2025-43406 | 1 Apple | 1 Macos | 2025-12-16 | 5.5 Medium |
| A logic issue was addressed with improved restrictions. This issue is fixed in macOS Tahoe 26.1. An app may be able to access sensitive user data. | ||||
| CVE-2023-22858 | 1 Blogengine | 1 Blogengine.net | 2025-12-16 | 5.3 Medium |
| An Improper Access Control vulnerability in BlogEngine.NET 3.3.8.0, allows unauthenticated visitors to access the files of unpublished blogs. | ||||
| CVE-2025-37959 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Scrub packet on bpf_redirect_peer When bpf_redirect_peer is used to redirect packets to a device in another network namespace, the skb isn't scrubbed. That can lead skb information from one namespace to be "misused" in another namespace. As one example, this is causing Cilium to drop traffic when using bpf_redirect_peer to redirect packets that just went through IPsec decryption to a container namespace. The following pwru trace shows (1) the packet path from the host's XFRM layer to the container's XFRM layer where it's dropped and (2) the number of active skb extensions at each function. NETNS MARK IFACE TUPLE FUNC 4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm_rcv_cb .active_extensions = (__u8)2, 4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm4_rcv_cb .active_extensions = (__u8)2, 4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 gro_cells_receive .active_extensions = (__u8)2, [...] 4026533547 0 eth0 10.244.3.124:35473->10.244.2.158:53 skb_do_redirect .active_extensions = (__u8)2, 4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv .active_extensions = (__u8)2, 4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv_core .active_extensions = (__u8)2, [...] 4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 udp_queue_rcv_one_skb .active_extensions = (__u8)2, 4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_policy_check .active_extensions = (__u8)2, 4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_decode_session .active_extensions = (__u8)2, 4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 security_xfrm_decode_session .active_extensions = (__u8)2, 4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 kfree_skb_reason(SKB_DROP_REASON_XFRM_POLICY) .active_extensions = (__u8)2, In this case, there are no XFRM policies in the container's network namespace so the drop is unexpected. When we decrypt the IPsec packet, the XFRM state used for decryption is set in the skb extensions. This information is preserved across the netns switch. When we reach the XFRM policy check in the container's netns, __xfrm_policy_check drops the packet with LINUX_MIB_XFRMINNOPOLS because a (container-side) XFRM policy can't be found that matches the (host-side) XFRM state used for decryption. This patch fixes this by scrubbing the packet when using bpf_redirect_peer, as is done on typical netns switches via veth devices except skb->mark and skb->tstamp are not zeroed. | ||||
| CVE-2025-37964 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Eliminate window where TLB flushes may be inadvertently skipped tl;dr: There is a window in the mm switching code where the new CR3 is set and the CPU should be getting TLB flushes for the new mm. But should_flush_tlb() has a bug and suppresses the flush. Fix it by widening the window where should_flush_tlb() sends an IPI. Long Version: === History === There were a few things leading up to this. First, updating mm_cpumask() was observed to be too expensive, so it was made lazier. But being lazy caused too many unnecessary IPIs to CPUs due to the now-lazy mm_cpumask(). So code was added to cull mm_cpumask() periodically[2]. But that culling was a bit too aggressive and skipped sending TLB flushes to CPUs that need them. So here we are again. === Problem === The too-aggressive code in should_flush_tlb() strikes in this window: // Turn on IPIs for this CPU/mm combination, but only // if should_flush_tlb() agrees: cpumask_set_cpu(cpu, mm_cpumask(next)); next_tlb_gen = atomic64_read(&next->context.tlb_gen); choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush); load_new_mm_cr3(need_flush); // ^ After 'need_flush' is set to false, IPIs *MUST* // be sent to this CPU and not be ignored. this_cpu_write(cpu_tlbstate.loaded_mm, next); // ^ Not until this point does should_flush_tlb() // become true! should_flush_tlb() will suppress TLB flushes between load_new_mm_cr3() and writing to 'loaded_mm', which is a window where they should not be suppressed. Whoops. === Solution === Thankfully, the fuzzy "just about to write CR3" window is already marked with loaded_mm==LOADED_MM_SWITCHING. Simply checking for that state in should_flush_tlb() is sufficient to ensure that the CPU is targeted with an IPI. This will cause more TLB flush IPIs. But the window is relatively small and I do not expect this to cause any kind of measurable performance impact. Update the comment where LOADED_MM_SWITCHING is written since it grew yet another user. Peter Z also raised a concern that should_flush_tlb() might not observe 'loaded_mm' and 'is_lazy' in the same order that switch_mm_irqs_off() writes them. Add a barrier to ensure that they are observed in the order they are written. | ||||
| CVE-2025-37963 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users Support for eBPF programs loaded by unprivileged users is typically disabled. This means only cBPF programs need to be mitigated for BHB. In addition, only mitigate cBPF programs that were loaded by an unprivileged user. Privileged users can also load the same program via eBPF, making the mitigation pointless. | ||||
| CVE-2025-37998 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: Fix unsafe attribute parsing in output_userspace() This patch replaces the manual Netlink attribute iteration in output_userspace() with nla_for_each_nested(), which ensures that only well-formed attributes are processed. | ||||
| CVE-2025-38389 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix timeline left held on VMA alloc error The following error has been reported sporadically by CI when a test unbinds the i915 driver on a ring submission platform: <4> [239.330153] ------------[ cut here ]------------ <4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count) <4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330942] Call Trace: <4> [239.330944] <TASK> <4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915] <4> [239.331202] i915_driver_release+0x86/0xa0 [i915] <4> [239.331482] devm_drm_dev_init_release+0x61/0x90 <4> [239.331494] devm_action_release+0x15/0x30 <4> [239.331504] release_nodes+0x3d/0x120 <4> [239.331517] devres_release_all+0x96/0xd0 <4> [239.331533] device_unbind_cleanup+0x12/0x80 <4> [239.331543] device_release_driver_internal+0x23a/0x280 <4> [239.331550] ? bus_find_device+0xa5/0xe0 <4> [239.331563] device_driver_detach+0x14/0x20 ... <4> [357.719679] ---[ end trace 0000000000000000 ]--- If the test also unloads the i915 module then that's followed with: <3> [357.787478] ============================================================================= <3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown() <3> [357.788031] ----------------------------------------------------------------------------- <3> [357.788204] Object 0xffff888109e7f480 @offset=29824 <3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244 <4> [357.788994] i915_vma_instance+0xee/0xc10 [i915] <4> [357.789290] init_status_page+0x7b/0x420 [i915] <4> [357.789532] intel_engines_init+0x1d8/0x980 [i915] <4> [357.789772] intel_gt_init+0x175/0x450 [i915] <4> [357.790014] i915_gem_init+0x113/0x340 [i915] <4> [357.790281] i915_driver_probe+0x847/0xed0 [i915] <4> [357.790504] i915_pci_probe+0xe6/0x220 [i915] ... Closer analysis of CI results history has revealed a dependency of the error on a few IGT tests, namely: - igt@api_intel_allocator@fork-simple-stress-signal, - igt@api_intel_allocator@two-level-inception-interruptible, - igt@gem_linear_blits@interruptible, - igt@prime_mmap_coherency@ioctl-errors, which invisibly trigger the issue, then exhibited with first driver unbind attempt. All of the above tests perform actions which are actively interrupted with signals. Further debugging has allowed to narrow that scope down to DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring submission, in particular. If successful then that function, or its execlists or GuC submission equivalent, is supposed to be called only once per GEM context engine, followed by raise of a flag that prevents the function from being called again. The function is expected to unwind its internal errors itself, so it may be safely called once more after it returns an error. In case of ring submission, the function first gets a reference to the engine's legacy timeline and then allocates a VMA. If the VMA allocation fails, e.g. when i915_vma_instance() called from inside is interrupted with a signal, then ring_context_alloc() fails, leaving the timeline held referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the timeline is got, and only that last one is put on successful completion. As a consequence, the legacy timeline, with its underlying engine status page's VMA object, is still held and not released on driver unbind. Get the legacy timeline only after successful allocation of the context engine's VMA. v2: Add a note on other submission methods (Krzysztof Karas): Both execlists and GuC submission use lrc_alloc() which seems free from a similar issue. (cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f) | ||||
| CVE-2024-35815 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/aio: Check IOCB_AIO_RW before the struct aio_kiocb conversion The first kiocb_set_cancel_fn() argument may point at a struct kiocb that is not embedded inside struct aio_kiocb. With the current code, depending on the compiler, the req->ki_ctx read happens either before the IOCB_AIO_RW test or after that test. Move the req->ki_ctx read such that it is guaranteed that the IOCB_AIO_RW test happens first. | ||||
| CVE-2024-35813 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid negative index with array access Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") assigns prev_idata = idatas[i - 1], but doesn't check that the iterator i is greater than zero. Let's fix this by adding a check. | ||||
| CVE-2022-24488 | 1 Microsoft | 9 Windows 10, Windows 10 20h2, Windows 10 21h1 and 6 more | 2025-12-16 | 7.8 High |
| Windows Desktop Bridge Elevation of Privilege Vulnerability | ||||
| CVE-2022-24468 | 1 Microsoft | 1 Azure Site Recovery | 2025-12-16 | 7.2 High |
| Azure Site Recovery Remote Code Execution Vulnerability | ||||
| CVE-2022-26646 | 1 Oretnom23 | 1 Banking System | 2025-12-16 | 9.8 Critical |
| Online Banking System Protect v1.0 was discovered to contain a local file inclusion (LFI) vulnerability via the pages parameter. | ||||
| CVE-2023-49252 | 1 Siemens | 2 Simatic Cn 4100, Simatic Cn 4100 Firmware | 2025-12-16 | 7.5 High |
| A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.7). The affected application allows IP configuration change without authentication to the device. This could allow an attacker to cause denial of service condition. | ||||
| CVE-2023-23583 | 3 Debian, Intel, Netapp | 443 Debian Linux, Core I3-1005g1, Core I3-1005g1 Firmware and 440 more | 2025-12-16 | 8.8 High |
| Sequence of processor instructions leads to unexpected behavior for some Intel(R) Processors may allow an authenticated user to potentially enable escalation of privilege and/or information disclosure and/or denial of service via local access. | ||||
| CVE-2023-20238 | 1 Cisco | 2 Broadworks Application Delivery Platform, Broadworks Xtended Services Platform | 2025-12-16 | 10 Critical |
| A vulnerability in the single sign-on (SSO) implementation of Cisco BroadWorks Application Delivery Platform and Cisco BroadWorks Xtended Services Platform could allow an unauthenticated, remote attacker to forge the credentials required to access an affected system. This vulnerability is due to the method used to validate SSO tokens. An attacker could exploit this vulnerability by authenticating to the application with forged credentials. A successful exploit could allow the attacker to commit toll fraud or to execute commands at the privilege level of the forged account. If that account is an Administrator account, the attacker would have the ability to view confidential information, modify customer settings, or modify settings for other users. To exploit this vulnerability, the attacker would need a valid user ID that is associated with an affected Cisco BroadWorks system. | ||||
| CVE-2023-20186 | 1 Cisco | 2 Ios, Ios Xe | 2025-12-16 | 8 High |
| A vulnerability in the Authentication, Authorization, and Accounting (AAA) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to bypass command authorization and copy files to or from the file system of an affected device using the Secure Copy Protocol (SCP). This vulnerability is due to incorrect processing of SCP commands in AAA command authorization checks. An attacker with valid credentials and level 15 privileges could exploit this vulnerability by using SCP to connect to an affected device from an external machine. A successful exploit could allow the attacker to obtain or change the configuration of the affected device and put files on or retrieve files from the affected device. | ||||