| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: Balance RCU calls in drbd_adm_dump_devices()
Make drbd_adm_dump_devices() call rcu_read_lock() before
rcu_read_unlock() is called. This has been detected by the Clang
thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid double drm_exec_fini() in userq validate
When new_addition is true, amdgpu_userq_vm_validate() calls
drm_exec_fini(&exec) before iterating over the collected HMM ranges and
calling amdgpu_ttm_tt_get_user_pages().
If amdgpu_ttm_tt_get_user_pages() fails in that path, the code jumps to
unlock_all and calls drm_exec_fini(&exec) a second time on the same
exec object. drm_exec_fini() is not idempotent: it frees exec->objects
and may also drop exec->contended and finalize the ww acquire context.
Route that error path directly to the range cleanup once exec has
already been finalized.
Issue found using a prototype static analysis tool
and confirmed by code review.
(cherry picked from commit 2802952e4a07306da6ebe813ff1acacc5691851a) |
| In the Linux kernel, the following vulnerability has been resolved:
sched/psi: fix race between file release and pressure write
A potential race condition exists between pressure write and cgroup file
release regarding the priv member of struct kernfs_open_file, which
triggers the uaf reported in [1].
Consider the following scenario involving execution on two separate CPUs:
CPU0 CPU1
==== ====
vfs_rmdir()
kernfs_iop_rmdir()
cgroup_rmdir()
cgroup_kn_lock_live()
cgroup_destroy_locked()
cgroup_addrm_files()
cgroup_rm_file()
kernfs_remove_by_name()
kernfs_remove_by_name_ns()
vfs_write() __kernfs_remove()
new_sync_write() kernfs_drain()
kernfs_fop_write_iter() kernfs_drain_open_files()
cgroup_file_write() kernfs_release_file()
pressure_write() cgroup_file_release()
ctx = of->priv;
kfree(ctx);
of->priv = NULL;
cgroup_kn_unlock()
cgroup_kn_lock_live()
cgroup_get(cgrp)
cgroup_kn_unlock()
if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->priv
The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards
the memory deallocation of of->priv performed within cgroup_file_release().
However, the operations involving of->priv executed within pressure_write()
are not entirely covered by the protection of cgroup_mutex. Consequently,
if the code in pressure_write(), specifically the section handling the
ctx variable executes after cgroup_file_release() has completed, a uaf
vulnerability involving of->priv is triggered.
Therefore, the issue can be resolved by extending the scope of the
cgroup_mutex lock within pressure_write() to encompass all code paths
involving of->priv, thereby properly synchronizing the race condition
occurring between cgroup_file_release() and pressure_write().
And, if an live kn lock can be successfully acquired while executing
the pressure write operation, it indicates that the cgroup deletion
process has not yet reached its final stage; consequently, the priv
pointer within open_file cannot be NULL. Therefore, the operation to
retrieve the ctx value must be moved to a point *after* the live kn
lock has been successfully acquired.
In another situation, specifically after entering cgroup_kn_lock_live()
but before acquiring cgroup_mutex, there exists a different class of
race condition:
CPU0: write memory.pressure CPU1: write cgroup.pressure=0
=========================== =============================
kernfs_fop_write_iter()
kernfs_get_active_of(of)
pressure_write()
cgroup_kn_lock_live(memory.pressure)
cgroup_tryget(cgrp)
kernfs_break_active_protection(kn)
... blocks on cgroup_mutex
cgroup_pressure_write()
cgroup_kn_lock_live(cgroup.pressure)
cgroup_file_show(memory.pressure, false)
kernfs_show(false)
kernfs_drain_open_files()
cgroup_file_release(of)
kfree(ctx)
of->priv = NULL
cgroup_kn_unlock()
... acquires cgroup_mutex
ctx = of->priv; // may now be NULL
if (ctx->psi.trigger) // NULL dereference
Consequently, there is a possibility that of->priv is NULL, the pressure
write needs to check for this.
Now that the scope of the cgroup_mutex has been expanded, the original
explicit cgroup_get/put operations are no longer necessary, this is
because acquiring/releasing the live kn lock inherently executes a
cgroup get/put operation.
[1]
BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011
Call Trace:
pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011
cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free on cdev close
This addresses a use-after-free bug when a raw bundle is disconnected
but its chardev is still opened by an application. When the application
releases the cdev, it causes the following panic when init on free is
enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130
...
Call Trace:
<TASK>
cdev_put+0x18/0x30
__fput+0x255/0x2a0
__x64_sys_close+0x3d/0x80
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The cdev is contained in the "gb_raw" structure, which is freed in the
disconnect operation. When the cdev is released at a later time,
cdev_put gets an address that points to freed memory.
To fix this use-after-free, convert the struct device from a pointer to
being embedded, that makes the lifetime of the cdev and of this device
the same. Then, use cdev_device_add, which guarantees that the device
won't be released until all references to the cdev have been released.
Finally, delegate the freeing of the structure to the device release
function, instead of freeing immediately in the disconnect callback. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy
powerpc uses pt_frag_refcount as a reference counter for tracking it's
pte and pmd page table fragments. For PTE table, in case of Hash with
64K pagesize, we have 16 fragments of 4K size in one 64K page.
Patch series [1] "mm: free retracted page table by RCU"
added pte_free_defer() to defer the freeing of PTE tables when
retract_page_tables() is called for madvise MADV_COLLAPSE on shmem
range.
[1]: https://lore.kernel.org/all/7cd843a9-aa80-14f-5eb2-33427363c20@google.com/
pte_free_defer() sets the active flag on the corresponding fragment's
folio & calls pte_fragment_free(), which reduces the pt_frag_refcount.
When pt_frag_refcount reaches 0 (no active fragment using the folio), it
checks if the folio active flag is set, if set, it calls call_rcu to
free the folio, it the active flag is unset then it calls pte_free_now().
Now, this can lead to following problem in a corner case...
[ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62
[ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62
[ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff)
[ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000
[ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000
[ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
[ 265.362572][ T183] Modules linked in:
[ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY
[ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries
[ 265.364908][ T183] Call Trace:
[ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable)
[ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8
[ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08
[ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310
[ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218
[ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820
[ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300
[ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508
[ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148
[ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178
[ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0
[ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
The bad page state error occurs when such a folio gets freed (with
active flag set), from do_exit() path in parallel.
... this can happen when the pte fragment was allocated from this folio,
but when all the fragments get freed, the pte_frag_refcount still had some
unused fragments. Now, if this process exits, with such folio as it's cached
pte_frag in mm->context, then during pte_frag_destroy(), we simply call
pagetable_dtor() and pagetable_free(), meaning it doesn't clear the
active flag. This, can lead to the above bug. Since we are anyway in
do_exit() path, then if the refcount is 0, then I guess it should be
ok to simply clear the folio active flag before calling pagetable_dtor()
& pagetable_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ap: use generic driver_override infrastructure
When the AP masks are updated via apmask_store() or aqmask_store(),
ap_bus_revise_bindings() is called after ap_attr_mutex has been
released.
This calls __ap_revise_reserved(), which accesses the driver_override
field without holding any lock, racing against a concurrent
driver_override_store() that may free the old string, resulting in a
potential UAF.
Fix this by using the driver-core driver_override infrastructure, which
protects all accesses with an internal spinlock.
Note that unlike most other buses, the AP bus does not check
driver_override in its match() callback; the override is checked in
ap_device_probe() and __ap_revise_reserved() instead.
Also note that we do not enable the driver_override feature of struct
bus_type, as AP - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Additionally, AP has a custom counter that is modified in the
corresponding custom driver_override_store(). |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In Eclipse 4diac FORTE versions 3.0.0 to 3.1.0, a specially crafted DELETE connection command to the management interface can lead to a dangling pointer. This allows subsequent commands to access freed memory (use-after-free). |
| concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::ReadWriteLock#release_write_lock does not verify that the calling thread acquired the write lock. Any thread with access to the lock object can release an active write lock held by another thread. A second writer can then enter its critical section while the first writer is still running. Concurrent::ReadWriteLock#release_read_lock also decrements the shared counter even when no read lock is held. Calling it on a fresh lock changes the counter from 0 to -1, after which normal read acquisition raises Concurrent::ResourceLimitError. This is a synchronization correctness issue in the public Concurrent::ReadWriteLock API. This vulnerability is fixed in 1.3.7. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: put folios not suitable for writeback
The batch holds references to the folios (see `filemap_get_folios`,
`folio_batch_release`), so we need to `folio_put` the folios we remove.
Tested on v6.18. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb2_open during durable reconnect
In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference
to the durable file descriptor early during the durable reconnect
process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails)
or a scavenger accesses the file, it leads to a use-after-free when
accessing fp properties (eg fp->create_time).
Move the single put to the end of the function below err_out2 so fp
stays valid until smb2_open returns. |
| The security fix for CVE-2025-0728 in eclipse-threadx NetX Duo refactors error handling in the HTTP server PUT process to use a shared cleanup label, but this unified cleanup path unconditionally calls fx_file_close() even when the file was never successfully opened. Multiple error branches jump to the shared cleanup label before any file open operation has occurred, causing fx_file_close() to operate on an uninitialized file handle, leading to undefined behavior, double-close issues, or memory corruption. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to cause an error path leading to UAF of GPU page tables.
The vulnerability allows physical memory allocated for MMU page tables to be used after being freed. This was caused by an error path that would not cleanup properly before freeing the physical allocation. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to cause mismanagement of resources creating a write use after free scenario.
A shared resource (memory page) managed by a CPU thread of control (driver) and accessed by a GPU thread of control (Firmware) can cause a write UAF when the CPU thread frees the resource before the GPU FW has finished accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stale offload->prog pointer after constant blinding
When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes
JIT compilation with constant blinding enabled (bpf_jit_harden >= 2),
bpf_jit_blind_constants() clones the program. The original prog is then
freed in bpf_jit_prog_release_other(), which updates aux->prog to point
to the surviving clone, but fails to update offload->prog.
This leaves offload->prog pointing to the freed original program. When
the network namespace is subsequently destroyed, cleanup_net() triggers
bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls
__bpf_prog_offload_destroy(offload->prog). Accessing the freed prog
causes a page fault:
BUG: unable to handle page fault for address: ffffc900085f1038
Workqueue: netns cleanup_net
RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80
Call Trace:
__bpf_offload_dev_netdev_unregister+0x257/0x350
bpf_dev_bound_netdev_unregister+0x4a/0x90
unregister_netdevice_many_notify+0x2a2/0x660
...
cleanup_net+0x21a/0x320
The test sequence that triggers this reliably is:
1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden)
2. Run xdp_metadata selftest, which creates a dev-bound-only XDP
program on a veth inside a netns (./test_progs -t xdp_metadata)
3. cleanup_net -> page fault in __bpf_prog_offload_destroy
Dev-bound-only programs are unique in that they have an offload structure
but go through the normal JIT path instead of bpf_prog_offload_compile().
This means they are subject to constant blinding's prog clone-and-replace,
while also having offload->prog that must stay in sync.
Fix this by updating offload->prog in bpf_jit_prog_release_other(),
alongside the existing aux->prog update. Both are back-pointers to
the prog that must be kept in sync when the prog is replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/wmi: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: check for device unregister when creating assoc
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring... |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free if write is called after disconnect
If a user writes to the chardev after disconnect has been called, the
kernel panics with the following trace (with
CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
BUG: kernel NULL pointer dereference, address: 0000000000000218
...
Call Trace:
<TASK>
gb_operation_create_common+0x61/0x180
gb_operation_create_flags+0x28/0xa0
gb_operation_sync_timeout+0x6f/0x100
raw_write+0x7b/0xc7 [gb_raw]
vfs_write+0xcf/0x420
? task_mm_cid_work+0x136/0x220
ksys_write+0x63/0xe0
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Disconnect calls gb_connection_destroy, which ends up freeing the
connection object. When gb_operation_sync is called in the write file
operations, its gets a freed connection as parameter and the kernel
panics.
The gb_connection_destroy cannot be moved out of the disconnect
function, as the Greybus subsystem expect all connections belonging to a
bundle to be destroyed when disconnect returns.
To prevent this bug, use a rw lock to synchronize access between write
and disconnect. This guarantees that the write function doesn't try
to use a disconnected connection. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec2 - prevent req used-after-free for sec
During packet transmission, if the system is under heavy load,
the hardware might complete processing the packet and free the
request memory (req) before the transmission function finishes.
If the software subsequently accesses this req, a use-after-free
error will occur. The qp_ctx memory exists throughout the packet
sending process, so replace the req with the qp_ctx. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc
pci_epf_alloc_doorbell() stores the allocated doorbell message array in
epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation
fails, the array is freed but the EPF state may still point to freed
memory.
Clear epf->db_msg and epf->num_db on the MSI allocation failure path so
that later cleanup cannot double-free the array and callers can retry
allocation.
Also return -EBUSY when doorbells have already been allocated to prevent
leaking or overwriting an existing allocation. |
