| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix stale skb->sk reference on subflow close
The backlog list is updated by mptcp_data_ready() under
mptcp_data_lock(). The cleanup of backlog references to a closing
subflow, however, was performed in mptcp_close_ssk(), before
__mptcp_close_ssk() acquires the ssk lock, and while holding neither
the ssk lock nor mptcp_data_lock().
Because that traversal ran without mptcp_data_lock(), concurrent softirq
RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready()
-> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog
entry referencing the ssk while the cleanup loop was in progress. Such
an entry could be missed by the cleanup, or the concurrent list update
could corrupt the traversal, leaving skb->sk pointing at the ssk after
it is freed.
A later mptcp_backlog_purge() then dereferences the stale pointer,
triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0)
followed by a use-after-free in mptcp_backlog_purge().
Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after
subflow->closing is set to 1 and while the ssk lock is still held,
serialized under mptcp_data_lock(). The cleanup runs only on the push
path (MPTCP_CF_PUSH), where backlog references accumulate; on other
teardown paths the caller already handles cleanup.
With subflow->closing set and mptcp_data_lock() held across the purge,
any concurrent mptcp_data_ready() either completes its enqueue before
the purge runs and is caught, or observes closing=1 and bails out. Once
mptcp_data_unlock() is reached, no new skb referencing the ssk can be
enqueued, so the cleanup is exhaustive.
Remove the unprotected traversal from mptcp_close_ssk() entirely. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
If the mmio_pipe_open() fails to find a PCI device, the hiter->dev
will be assigned to NULL. The mmiotrace read() function dereferences the
hiter->dev if hiter exists.
Change the test of the read to not only check hiter being NULL, but also
the hiter->dev before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Delay module ref count for "enable_event" trigger
Triggers are now delayed from freeing, but can still be triggered until
after the RCU grace period has ended. The freeing of the enable_event data
is put into the private_data_free() callback, but the put of the module
refcount is done immediately.
It is possible that if a module is removed that has an event that would
enable (or disable) it is still active, it can read the data of the module
after it is removed causing a use-after-free bug.
Move the trace_event_put_ref() that releases the module into the delayed
callback so that the module can not be removed until any reference to its
events are finished. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: pin the module while the device is open
misc_open() installs a misc driver's file operations with fops_get(),
which pins file_operations::owner before replacing the file's f_op. The
NSM misc device leaves nsm_dev_fops.owner unset, so opening /dev/nsm does
not take a module reference on the nsm driver.
If the driver is built as a module, an open file descriptor can therefore
survive rmmod of the module that provides its ioctl callbacks. A later
ioctl through that descriptor can call into unloaded module text.
Set nsm_dev_fops.owner to THIS_MODULE so the misc core holds the module
while any /dev/nsm file descriptor is open, matching the lifetime
expectation for the installed file operations. |
| In the Linux kernel, the following vulnerability has been resolved:
mei: bus: access mei_device under device_lock on cleanup
Fix couple of problems in mei_cl_bus_dev_release():
mei_cl_flush_queues() is running without lock.
bus->file_list access after mei_dev_bus_put(bus) can become a
use-after-free if this was the last reference to bus.
Protect queues cleanup and WARN traversal by device lock there
to avoid the concurrent access problems.
Move WARN traversal before mei_dev_bus_put(bus).
This file uses bus variable name for mei_device, adjust
code of mei_cl_bus_dev_release() to use bus variable too. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOC
When prefetch region is DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC for a BO VMA,
the code used it as an index into region_to_mem_type[], causing an
out-of-bounds access since the value is -1.
Resolve the preferred location for BO VMAs directly: local VRAM on dGFX
(using the BO's tile placement) or system memory on iGPU.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
-Fix null dereference
(cherry picked from commit d9a4906ac03be9f6ed3f3b45c56c866b867fd75b) |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets
vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the
outer header, but for a Geneve-encapsulated packet the device can set
them based on the inner header instead, signalled by the
VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the
function never skips the outer encapsulation, this mismatch triggers:
- BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer
protocol is UDP (Geneve), not TCP.
- BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner
IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa).
Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the
function cannot locate the inner header it would need to parse. Also
convert the remaining BUG_ON()s in this function to return 0
defensively. |
| Magnolia CMS is vulnerable to Stored XSS in import functionality. An attacker with editor privileges can inject arbitrary HTML and JS into the name of uploaded image, which will be rendered/executed when opening uploaded image.
The issue was fixed in version 6.3.10 |
| Improper verification of cryptographic signature and Improper Check for Unusual or Exceptional Conditions vulnerability in Estonian Information System Authority (RIA) libdigidocpp, DigiDoc4, DigiDoc on Android, and DigiDoc on iOS. This issue affects libdigidocpp: from 4.1.0 before 4.2.1; DigiDoc4: from 4.7.0 before 4.8.2; DigiDoc on Android: from 2.7.0 before 2.7.2; DigiDoc on iOS: from 2.8.0 before 2.8.1. |
| OpenCart extensions are uploaded as zip files with .ocmod.zip extensions. Upon installation, the OpenCart v4.2.0.0 extension installer extracts these zip files, but does not validate that the extracted paths stay inside the intended extraction directory. An attacker can craft a malicious extension containing file path traversal sequences, such as ../. With this vulnerability, an attacker can write files, such as a PHP web shell, into the webroot directory. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, the createCommand() function constructs shell commands by interpolating compose service names and configuration into bash command strings. When a compose with a maliciously crafted name or service definition is deployed, the shell metacharacters are interpreted as command separators, allowing arbitrary command execution on the Docker host. This vulnerability is fixed in 0.29.13. |
| When expanding paths that begin with a tilde (~) followed by a username, the internal parse_tilde function extracts the username to determine the user's home directory. The implementation allocates memory for this username directly on the stack using the strndupa macro. Because the size of this allocation was determined by the length of the user-supplied input without any bounds checks, passing an excessively long username e.g. thousands of characters, forces the thread to exhaust its stack space. Thus if an application passes untrusted, attacker-controlled input to the wordexp function, an attacker can trigger a stack clash. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, the backup.restoreBackupWithLogs tRPC subscription passes the databaseName parameter to restore builders in packages/server/src/utils/restore/utils.ts, where PostgreSQL, MariaDB, MySQL, and MongoDB commands embed the value in nested shell text executed by Node.js exec. An authenticated user with backup:restore permission can supply a crafted databaseName that the host /bin/sh expands before docker exec, resulting in arbitrary commands running in the Docker-privileged host context. This issue is fixed in version 0.29.13. |
| Flowise versions 2.2.4 through 3.1.4 contain a missing authorization vulnerability in the POST /api/v1/openai-assistants-file/download endpoint that allows unauthenticated attackers to access private files by exploiting the endpoint's inclusion in the global authentication whitelist, which bypasses all session and API key verification. Attackers can supply valid chatflowId, chatId, and fileName identifiers to retrieve files from any chatflow on the instance, including private chatflows belonging to other workspaces or organizations. |
| Calling wordexp with WRDE_APPEND in the GNU C Library version 2.0 to version 2.43 can cause the interface to return invalid memory in the we_wordv member, which on subsequent calls to wordfree may abort the process. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, apps/dokploy/server/api/routers/destination.ts interpolates the accessKey, secretAccessKey, region, endpoint, provider, and bucket fields from destination.testConnection into an rclone ls command executed through child_process.exec. The `withPermission("destination", "create")` path permits a low-privileged organization member to reach the mutation, close a quoted argument with a crafted field, and execute arbitrary commands in the root Dokploy container, which has access to the host Docker socket. This issue is fixed in version 0.29.13. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, writeTraefikConfigRemote in packages/server/src/utils/traefik/application.ts serializes user-controlled Traefik configuration with yaml.stringify and interpolates the resulting yamlStr into an echo command executed through execAsyncRemote. Single quotes in redirect regex and replacement fields, basic authentication usernames, domain host values, or middleware configuration can terminate the shell quoting and execute arbitrary commands on managed remote servers with the configured SSH user's privileges. This vulnerability is caused by an incomplete fix for CVE-2026-45630. This issue is fixed in version 0.29.13. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). From 0.29.3 until 0.29.13, the incomplete fix for CVE-2026-45628 leaves packages/server/src/db/schema/compose.ts branch fields without server-side validation, allowing a direct compose.update request to store a malicious customGitBranch, branch, gitlabBranch, bitbucketBranch, or giteaBranch. A low-privileged authenticated user can trigger compose.deploy, which passes the stored branch to shell-based Git clone commands in packages/server/src/utils/providers/git.ts, github.ts, gitlab.ts, bitbucket.ts, and gitea.ts, resulting in arbitrary host command execution. This issue is fixed in version 0.29.13. |
| Discourse is an open-source discussion platform. Prior to 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0, the Rich Text Editor rendered a chat-transcript username as HTML, allowing stored cross-site scripting. This issue is fixed in versions 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0. |
| An authentication bypass vulnerability in the Check Point SmartConsole login process allows an unauthenticated remote attacker to obtain an application login token and use it to authenticate with full administrative privileges. Successful exploitation allows the attacker to modify security policies and security configurations. Remote exploitation requires internet access to the Management Server IP address and a configuration that does not restrict Trusted Clients. Check Point is aware that this vulnerability is being exploited and has affected a very small number of customers. |
