| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause BOOTP packets to be forwarded between VLANs, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper handling of BOOTP packets on Cisco Catalyst 9000 Series Switches. An attacker could exploit this vulnerability by sending BOOTP request packets to an affected device. A successful exploit could allow an attacker to forward BOOTP packets from one VLAN to another, resulting in BOOTP VLAN leakage and potentially leading to high CPU utilization. This makes the device unreachable (either through console or remote management) and unable to forward traffic, resulting in a DoS condition.
Note: This vulnerability can be exploited with either unicast or broadcast BOOTP packets.
There are workarounds that address this vulnerability. |
| A vulnerability in the Lobby Ambassador web-based management API of Cisco IOS XE Software could allow an authenticated, remote attacker to elevate their privileges and access management APIs that would not normally be available for Lobby Ambassador users.
This vulnerability exists because parameters that are received by an API endpoint are not sufficiently validated. An attacker could exploit this vulnerability by authenticating as a Lobby Ambassador user and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to create a new user with privilege level 1 access to the web-based management API. The attacker would then be able to access the device with these new credentials and privileges. |
| A vulnerability in Cisco IOS XE Software for Cisco Meraki could allow a remote, unauthenticated attacker to view confidential device information.
This vulnerability is due to a device configuration upload being performed over an insecure tunnel. An attacker could exploit this vulnerability by conducting an on-path attack between the affected device and the Cisco Meraki Dashboard. A successful exploit could allow the attacker to view sensitive device configuration information. |
| A vulnerability in the HTTP Server feature of Cisco IOS Software and Cisco IOS XE Software Release 3E could allow an authenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malformed HTTP requests to an affected device. A successful exploit could allow the attacker to cause a watchdog timer to expire and the device to reload, resulting in a DoS condition. To exploit this vulnerability, the attacker must have a valid user account. |
| A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands on the underlying operating system. |
| A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) multi-instance routing feature of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the IS-IS process to restart unexpectedly.
This vulnerability is due to insufficient input validation of ingress IS-IS packets. An attacker could exploit this vulnerability by sending crafted IS-IS packets to an affected device after forming an adjacency. A successful exploit could allow the attacker to cause the IS-IS process to restart unexpectedly, resulting in a temporary loss of connectivity to advertised networks and a denial of service (DoS) condition.
Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device and must have formed an adjacency. |
| A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local attacker to elevate privileges and gain full administrative control of an affected device.
This vulnerability is due to incorrect mapping of a command to task groups within the source code. An attacker with a low-privileged account could exploit this vulnerability by using the CLI command to bypass the task group–based checks. A successful exploit could allow the attacker to elevate privileges and perform actions on an affected device without authorization checks. |
| A vulnerability in the handling of an Egress Packet Network Interface (EPNI) Aligner interrupt in Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series with NC57 line cards and Cisco NCS 5700 Routers and Cisco IOS XR Software for Third Party Software could allow an unauthenticated, remote attacker to cause the network processing unit (NPU) and ASIC to stop processing, preventing traffic from traversing the interface.
This vulnerability is due to the corruption of packets in specific cases when an EPNI Aligner interrupt is triggered while an affected device is experiencing heavy transit traffic. An attacker could exploit this vulnerability by sending a continuous flow of crafted packets to an interface of the affected device. A successful exploit could allow the attacker to cause persistent, heavy packet loss, resulting in a denial of service (DoS) condition.
Note: If active exploitation of this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or your contracted maintenance provider.
Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates. This change was made because the affected device operates within a critical network segment where compromise could lead to significant disruption or exposure, thereby elevating the overall risk beyond the base technical severity. |
| A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands. |
| A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker with high privileges to bypass the Secure Boot functionality and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device.
This vulnerability is due to insufficient verification of modules in the software load process. An attacker could exploit this vulnerability by manipulating the loaded binaries to bypass some of the integrity checks that are performed during the booting process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system.
Note: This vulnerability affects Cisco IOS XR Software, not the Secure Boot feature.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR image signature verification and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device.
This vulnerability is due to incomplete validation of files in the boot verification process. An attacker could exploit this vulnerability by manipulating the system configuration options to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system.
Note: Because exploitation of this vulnerability could result in the attacker bypassing Cisco image verification, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. |
| A vulnerability in the bootstrap loading of Cisco IOS XE Software could allow an authenticated, local attacker to write arbitrary files to an affected system.
This vulnerability is due to insufficient input validation of the bootstrap file that is read by the system software when a device is first deployed in SD-WAN mode or when an administrator configures SD-Routing on the device. An attacker could exploit this vulnerability by modifying a bootstrap file generated by Cisco Catalyst SD-WAN Manager, loading it into the device flash, and then either reloading the device in a green field deployment in SD-WAN mode or configuring the device with SD-Routing. A successful exploit could allow the attacker to perform arbitrary file writes to the underlying operating system. |
| A vulnerability in the web-based management interface of the Wireless LAN Controller feature of Cisco IOS XE Software could allow an authenticated, remote attacker with a lobby ambassador user account to perform a command injection attack against an affected device.
This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary Cisco IOS XE Software CLI commands with privilege level 15.
Note: This vulnerability is exploitable only if the attacker obtains the credentials for a lobby ambassador account. This account is not configured by default. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an authenticated, low-privileged, remote attacker to perform an injection attack against an affected device.
This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web-based management interface. A successful exploit could allow the attacker to read limited files from the underlying operating system or clear the syslog and licensing logs on the affected device. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow the following:
An authenticated, remote attacker with low privileges could cause a denial of service (DoS) condition on an affected device that is running Cisco IOS Software or Cisco IOS XE Software. To cause the DoS, the attacker must have the SNMPv2c or earlier read-only community string or valid SNMPv3 user credentials.
An authenticated, remote attacker with high privileges could execute code as the root user on an affected device that is running Cisco IOS XE Software. To execute code as the root user, the attacker must have the SNMPv1 or v2c read-only community string or valid SNMPv3 user credentials and administrative or privilege 15 credentials on the affected device.
An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device over IPv4 or IPv6 networks.
This vulnerability is due to a stack overflow condition in the SNMP subsystem of the affected software. A successful exploit could allow a low-privileged attacker to cause the affected system to reload, resulting in a DoS condition, or allow a high-privileged attacker to execute arbitrary code as the root user and obtain full control of the affected system.
Note: This vulnerability affects all versions of SNMP. |
