| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: defer link RX stats percpu free to RCU
sta_remove_link() frees a removed MLO link's RX stats percpu buffer right
away, but defers only the link container to RCU:
sta_info_free_link(&alloc->info);
kfree_rcu(alloc, rcu_head);
The RX fast path reads link_sta under rcu_read_lock and writes the percpu
stats. A reader that resolved link_sta before the removal keeps the
pointer. The container stays alive from the kfree_rcu, so the read still
works. But the percpu block it points to is already freed. This needs
uses_rss. That is when pcpu_rx_stats exists.
The full STA teardown frees the deflink stats only after
synchronize_net(). The link removal path had no such barrier. The race is
hard to win in practice, but the free should still wait for RCU.
Free the link together with its data from a single RCU callback, so the
percpu block is reclaimed only after readers drain. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ipw2100: fix potential memory leak in ipw2100_pci_init_one()
The memory allocated in the ipw2100_alloc_device() function is not freed
in some of the error paths in ipw2100_pci_init_one(). Fix that by
converting the direct return into a goto to the error path return.
The error path when pci_enable_device() fails cannot jump to fail, since
at this point priv is not set, so perform error handling inline. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: clear mode callbacks after failed mode setup
xfrm_state_gc_task can run long after a failed IPTFS state setup. In the
reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup
returned -ENOMEM before publishing mode_data, and the temporary module
reference from xfrm_get_mode_cbs() was dropped immediately. The dead state
then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been
unloaded.
Clear x->mode_cbs when mode init or clone fails before publishing
mode_data. Those states never installed mode-specific state or the
long-term IPTFS module pin, so deferred GC has nothing mode-specific to
destroy and must not retain a callback table pointer past the temporary
lookup reference.
The buggy scenario involves two paths, with each column showing the order
within that path:
failed setup path:
1. cache x->mode_cbs
2. mode setup fails before mode_data
3. drop the temporary module ref
4. dead state keeps x->mode_cbs cached
GC/unload path:
1. xfrm_state_put() queues GC work
2. xfrm_iptfs unloads later
3. xfrm_state_gc_task runs
4. GC dereferences stale x->mode_cbs
This also covers the failed clone path where clone_state() returns before
publishing mode_data.
Validation reproduced this kernel report:
Kernel panic - not syncing: Fatal exception
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
failslab_stacktrace_filter matched xfrm_iptfs frames
ack_error=-12
FAULT_INJECTION: forcing a failure
BUG: unable to handle page fault
Workqueue: events xfrm_state_gc_task
RIP: xfrm_state_gc_task+0x142/0x650
Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs]
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: fix double free and WARN_ON in add_mtd_device() error paths
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Prevent user-triggered null deref on QP create
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths. |
| A flaw was identified in Argo CD, the GitOps engine used by Red Hat OpenShift GitOps, that could allow an unauthenticated attacker with network access to the Argo CD repo-server to achieve remote code execution. Under certain conditions, the attacker may then manipulate cached data to deploy malicious Kubernetes resources to managed clusters, potentially resulting in complete cluster compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: printer: fix infinite loop in printer_read()
printer_read() uses the same variable for the requested copy size and
the number of bytes actually copied to user space. copy_to_user()
returns the number of bytes not copied, so when it fails to copy
anything, the computed copied length becomes zero.
In that case len, buf, current_rx_bytes and current_rx_buf are left
unchanged. If RX data is available and the user buffer remains
unwritable, the read loop can repeat indefinitely.
Track the copied length separately and return -EFAULT, or the number of
bytes already copied, if an iteration makes no progress. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Do not put borrowed of_node in probe
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF in sock clone early bailouts
Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage
before bailouts that access it"), sk_clone() performs an initial
shallow copy of the socket field ->sk_bpf_storage via sock_copy()
for the cloned socket newsk.
If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior
to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points
to the parent socket's BPF local storage. When newsk is subsequently
freed via sk_free(), the deallocation path (__sk_destruct() ->
bpf_sk_storage_free()) destroys the parent socket's BPF local storage,
leading to a use-after-free (UAF) on the parent socket.
Fix this by resetting newsk->sk_bpf_storage to NULL immediately after
sock_copy() in sk_clone(), and remove the now redundant initialization
from bpf_sk_storage_clone(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: initialize SDIO data work before cleanup
brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before
allocating the ordered workqueue. If that allocation fails, the function
jumps to fail and calls brcmf_sdio_remove().
brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the
work item before the first failure path that can reach brcmf_sdio_remove(),
so the cleanup path always observes a valid work object.
This issue was found by our static analysis tool and then confirmed by
manual review of the probe error path and the remove-time work drain. The
problem pattern is an early setup failure that reaches a cleanup helper
which cancels an embedded work item before its initializer has run.
A QEMU PoC forced alloc_ordered_workqueue() to fail at the same point in
brcmf_sdio_probe(), before INIT_WORK(&bus->datawork) is reached. The
resulting fail path calls brcmf_sdio_remove(), and DEBUG_OBJECTS reports
the invalid work drain with brcmf_sdio_probe() and brcmf_sdio_remove() in
the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate PMSR FTM preamble range
PMSR FTM request parsing accepts preamble values outside the
enumerated nl80211 preamble range.
Reject out-of-range values before using them in the parser capability
bit test using the policy.
[drop unnecessary check] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: free RNR data on MBSSID mismatch
nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR
entries than MBSSID entries.
The rejected RNR allocation has not been attached to the beacon data yet,
so free it before returning the error. |
| When using the "configparser" module to write configuration files
containing multi-line text values with carriage return characters (\r) the
resulting file could be injected with unexpected keys and values if the
attacker controls the written value. |
| tarfile.extractall() with the 'data' or 'tar'
filter could be bypassed by a crafted archive where a hardlink
references a symlink stored at a deeper name than the hardlink itself.
The extraction fallback validated the symlink at it's archived location
but recreated it at the hardlink's shallower
path, letting a relative
target the filter judged contained escape the destination directory.
This allowed a malicious tar archive to create a symlink pointing
outside the destination, enabling out-of-destination file reads or
writes. This was an incomplete fix of CVE-2025-4330. |
| To allow builds of Python to be run from an in-tree layout (rather than
an installed file layout), the VPATH variable is defined at build time
and used to locate certain landmarks - specifically,
Modules/setup.local. When this landmark is found relative to VPATH
relative to the executable, Python assumes it is running in a source
tree and generates a different default sys.path. This code remains in
release builds, so that release-ready builds can be built in-tree.
On Windows, since builds are written to 'PCbuild/', the value of
VPATH is set to '..\..', which results in a landmark of
'..\..\Modules\setup.local'. This path is outside the install directory
of Python, and may have different permissions, potentially allowing a
low-privilege user to create the landmark and an alternative `Lib`
folder that will be discovered by an otherwise restricted install.
Such a setup occurs with the legacy default install location for all
users (in the now superseded EXE installer), due to how Windows allows
all users to create folders in the root directory of their OS drive.
Our recommended mitigation on Windows is to migrate away from the
legacy installer and use the new [Python install
manager](https://www.python.org/downloads/latest/pymanager/) to install
for the current user. Installs where the directory two levels above the
Python installation directory have equivalent permissions are unaffected
(in general, a per-user install cannot be modified at all by other
users, removing any escalation of privilege risk, and could be directly
modified by a privileged user, making the potential tampering
irrelevant). Alternative mitigations might include preemptively creating
and restricting access to a `Modules` directory. Be aware that only 3.13
and 3.14 will receive updated legacy installers - earlier fixes are only
provided as sources.
Platforms other than Windows allow VPATH to be overridden, but as they
don't usually use a separated directory in the build for binaries, are
unlikely to have a landmark reference outside of the install directory.
The landmark detection involving VPATH is a fallback for when a more
specific landmark - .\pybuilddir.txt - is absent, and was included for
compatibility. Future releases of Python will no longer include the
fallback, and so builds will need to generate or preserve the
pybuilddir.txt file in order to work in-tree. This landmark file has
been generated on Windows since 3.11, and on other platforms for longer. |
| The incremental HTML parser (html.parser.HTMLParser) allows for CPU
denial-of-service through repeated unterminated markup declarations when
processing uncontrolled data. |
| unicodedata.normalize() can take excessive CPU time when processing
specially crafted Unicode input containing long runs of combining characters
with alternating Canonical Combining Class values.
This affects all normalization forms. |
| `Element.findall()` and fully-consumed `Element.iterfind()` exhibit `O(n^2)` time complexity when using XPath index predicates (e.g. `[1]`, `[last()]`, `[last()-N]`) on XML documents with many same-tag siblings. `Element.find()` is only affected when the first match is near the end of the sibling list, such as with `[last()]` or `[last()-N]`; `.//item[1]` short-circuits after the first match. |
| bz2.BZ2Decompressor objects could be reused after a decompression error. If an application caught the resulting OSError and retried with the same decompressor, crafted input could cause the decompressor to resume from an invalid internal state and perform out-of-bounds writes to a stack buffer. This could crash the process when processing untrusted data. |
