| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()
Fix a stack-out-of-bounds write that occurs in a WMI response callback
function that is called after a timeout occurs in ath9k_wmi_cmd().
The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that
could no longer be valid when a timeout occurs. Set wmi->last_seq_id to
0 when a timeout occurred.
Found by a modified version of syzkaller.
BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx
Write of size 4
Call Trace:
memcpy
ath9k_wmi_ctrl_rx
ath9k_htc_rx_msg
ath9k_hif_usb_reg_in_cb
__usb_hcd_giveback_urb
usb_hcd_giveback_urb
dummy_timer
call_timer_fn
run_timer_softirq
__do_softirq
irq_exit_rcu
sysvec_apic_timer_interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix skb leak in __skb_tstamp_tx()
Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with
TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with
zerocopy skbs. But it ended up adding a leak of its own. When
skb_orphan_frags_rx() fails, the function just returns, leaking the skb
it just cloned. Free it before returning.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9317/1: kexec: Make smp stop calls asynchronous
If a panic is triggered by a hrtimer interrupt all online cpus will be
notified and set offline. But as highlighted by commit 19dbdcb8039c
("smp: Warn on function calls from softirq context") this call should
not be made synchronous with disabled interrupts:
softdog: Initiating panic
Kernel panic - not syncing: Software Watchdog Timer expired
WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond
unwind_backtrace:
show_stack
dump_stack_lvl
__warn
warn_slowpath_fmt
smp_call_function_many_cond
smp_call_function
crash_smp_send_stop.part.0
machine_crash_shutdown
__crash_kexec
panic
softdog_fire
__hrtimer_run_queues
hrtimer_interrupt
Make the smp call for machine_crash_nonpanic_core() asynchronous. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Clean up only new IRQ glue on request_irq() failure
The mlx5_irq_alloc() function can inadvertently free the entire rmap
and end up in a crash[1] when the other threads tries to access this,
when request_irq() fails due to exhausted IRQ vectors. This commit
modifies the cleanup to remove only the specific IRQ mapping that was
just added.
This prevents removal of other valid mappings and ensures precise
cleanup of the failed IRQ allocation's associated glue object.
Note: This error is observed when both fwctl and rds configs are enabled.
[1]
mlx5_core 0000:05:00.0: Successfully registered panic handler for port 1
mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to
request irq. err = -28
infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while
trying to test write-combining support
mlx5_core 0000:05:00.0: Successfully unregistered panic handler for port 1
mlx5_core 0000:06:00.0: Successfully registered panic handler for port 1
mlx5_core 0000:06:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to
request irq. err = -28
infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while
trying to test write-combining support
mlx5_core 0000:06:00.0: Successfully unregistered panic handler for port 1
mlx5_core 0000:03:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to
request irq. err = -28
mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to
request irq. err = -28
general protection fault, probably for non-canonical address
0xe277a58fde16f291: 0000 [#1] SMP NOPTI
RIP: 0010:free_irq_cpu_rmap+0x23/0x7d
Call Trace:
<TASK>
? show_trace_log_lvl+0x1d6/0x2f9
? show_trace_log_lvl+0x1d6/0x2f9
? mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core]
? __die_body.cold+0x8/0xa
? die_addr+0x39/0x53
? exc_general_protection+0x1c4/0x3e9
? dev_vprintk_emit+0x5f/0x90
? asm_exc_general_protection+0x22/0x27
? free_irq_cpu_rmap+0x23/0x7d
mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core]
irq_pool_request_vector+0x7d/0x90 [mlx5_core]
mlx5_irq_request+0x2e/0xe0 [mlx5_core]
mlx5_irq_request_vector+0xad/0xf7 [mlx5_core]
comp_irq_request_pci+0x64/0xf0 [mlx5_core]
create_comp_eq+0x71/0x385 [mlx5_core]
? mlx5e_open_xdpsq+0x11c/0x230 [mlx5_core]
mlx5_comp_eqn_get+0x72/0x90 [mlx5_core]
? xas_load+0x8/0x91
mlx5_comp_irqn_get+0x40/0x90 [mlx5_core]
mlx5e_open_channel+0x7d/0x3c7 [mlx5_core]
mlx5e_open_channels+0xad/0x250 [mlx5_core]
mlx5e_open_locked+0x3e/0x110 [mlx5_core]
mlx5e_open+0x23/0x70 [mlx5_core]
__dev_open+0xf1/0x1a5
__dev_change_flags+0x1e1/0x249
dev_change_flags+0x21/0x5c
do_setlink+0x28b/0xcc4
? __nla_parse+0x22/0x3d
? inet6_validate_link_af+0x6b/0x108
? cpumask_next+0x1f/0x35
? __snmp6_fill_stats64.constprop.0+0x66/0x107
? __nla_validate_parse+0x48/0x1e6
__rtnl_newlink+0x5ff/0xa57
? kmem_cache_alloc_trace+0x164/0x2ce
rtnl_newlink+0x44/0x6e
rtnetlink_rcv_msg+0x2bb/0x362
? __netlink_sendskb+0x4c/0x6c
? netlink_unicast+0x28f/0x2ce
? rtnl_calcit.isra.0+0x150/0x146
netlink_rcv_skb+0x5f/0x112
netlink_unicast+0x213/0x2ce
netlink_sendmsg+0x24f/0x4d9
__sock_sendmsg+0x65/0x6a
____sys_sendmsg+0x28f/0x2c9
? import_iovec+0x17/0x2b
___sys_sendmsg+0x97/0xe0
__sys_sendmsg+0x81/0xd8
do_syscall_64+0x35/0x87
entry_SYSCALL_64_after_hwframe+0x6e/0x0
RIP: 0033:0x7fc328603727
Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed
ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48
RSP: 002b:00007ffe8eb3f1a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc328603727
RDX: 0000000000000000 RSI: 00007ffe8eb3f1f0 RDI: 000000000000000d
RBP: 00007ffe8eb3f1f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
R13: 00000000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE`
objects while evaluating the AMD LPS0 _DSM, there will be a memory
leak. Explicitly guard against this. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Fix for shift-out-of-bounds
Shift operation of 'exp' and 'shift' variables exceeds the maximum number
of shift values in the u32 range leading to UBSAN shift-out-of-bounds.
...
[ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50
[ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int'
[ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10
[ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023
[ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh]
[ 6.120687] Call Trace:
[ 6.120690] <TASK>
[ 6.120694] dump_stack_lvl+0x48/0x70
[ 6.120704] dump_stack+0x10/0x20
[ 6.120707] ubsan_epilogue+0x9/0x40
[ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[ 6.120720] ? psi_group_change+0x25f/0x4b0
[ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh]
[ 6.120739] get_input_rep+0x57/0x340 [amd_sfh]
[ 6.120748] ? __schedule+0xba7/0x1b60
[ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh]
[ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh]
[ 6.120772] process_one_work+0x229/0x430
[ 6.120780] worker_thread+0x4a/0x3c0
[ 6.120784] ? __pfx_worker_thread+0x10/0x10
[ 6.120788] kthread+0xf7/0x130
[ 6.120792] ? __pfx_kthread+0x10/0x10
[ 6.120795] ret_from_fork+0x29/0x50
[ 6.120804] </TASK>
...
Fix this by adding the condition to validate shift ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: annotate lockless accesses to nlk->max_recvmsg_len
syzbot reported a data-race in data-race in netlink_recvmsg() [1]
Indeed, netlink_recvmsg() can be run concurrently,
and netlink_dump() also needs protection.
[1]
BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg
read to 0xffff888141840b38 of 8 bytes by task 23057 on cpu 0:
netlink_recvmsg+0xea/0x730 net/netlink/af_netlink.c:1988
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg net/socket.c:1038 [inline]
__sys_recvfrom+0x1ee/0x2e0 net/socket.c:2194
__do_sys_recvfrom net/socket.c:2212 [inline]
__se_sys_recvfrom net/socket.c:2208 [inline]
__x64_sys_recvfrom+0x78/0x90 net/socket.c:2208
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
write to 0xffff888141840b38 of 8 bytes by task 23037 on cpu 1:
netlink_recvmsg+0x114/0x730 net/netlink/af_netlink.c:1989
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg net/socket.c:1038 [inline]
____sys_recvmsg+0x156/0x310 net/socket.c:2720
___sys_recvmsg net/socket.c:2762 [inline]
do_recvmmsg+0x2e5/0x710 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0x0000000000001000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23037 Comm: syz-executor.2 Not tainted 6.3.0-rc4-syzkaller-00195-g5a57b48fdfcb #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: use vector instructions only if available for ChaCha20
Commit 349d03ffd5f6 ("crypto: s390 - add crypto library interface for
ChaCha20") added a library interface to the s390 specific ChaCha20
implementation. However no check was added to verify if the required
facilities are installed before branching into the assembler code.
If compiled into the kernel, this will lead to the following crash,
if vector instructions are not available:
data exception: 0007 ilc:3 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7+ #11
Hardware name: IBM 3931 A01 704 (KVM/Linux)
Krnl PSW : 0704e00180000000 000000001857277a (chacha20_vx+0x32/0x818)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000037f0000000a ffffffffffffff60 000000008184b000 0000000019f5c8e6
0000000000000109 0000037fffb13c58 0000037fffb13c78 0000000019bb1780
0000037fffb13c58 0000000019f5c8e6 000000008184b000 0000000000000109
00000000802d8000 0000000000000109 0000000018571ebc 0000037fffb13718
Krnl Code: 000000001857276a: c07000b1f80b larl %r7,0000000019bb1780
0000000018572770: a708000a lhi %r0,10
#0000000018572774: e78950000c36 vlm %v24,%v25,0(%r5),0
>000000001857277a: e7a060000806 vl %v26,0(%r6),0
0000000018572780: e7bf70004c36 vlm %v27,%v31,0(%r7),4
0000000018572786: e70b00000456 vlr %v0,%v27
000000001857278c: e71800000456 vlr %v1,%v24
0000000018572792: e74b00000456 vlr %v4,%v27
Call Trace:
[<000000001857277a>] chacha20_vx+0x32/0x818
Last Breaking-Event-Address:
[<0000000018571eb6>] chacha20_crypt_s390.constprop.0+0x6e/0xd8
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Fix this by adding a missing MACHINE_HAS_VX check.
[agordeev@linux.ibm.com: remove duplicates in commit message] |
| Insufficient control flow management in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fsl-cpm: Check length parity before switching to 16 bit mode
Commit fc96ec826bce ("spi: fsl-cpm: Use 16 bit mode for large transfers
with even size") failed to make sure that the size is really even
before switching to 16 bit mode. Until recently the problem went
unnoticed because kernfs uses a pre-allocated bounce buffer of size
PAGE_SIZE for reading EEPROM.
But commit 8ad6249c51d0 ("eeprom: at25: convert to spi-mem API")
introduced an additional dynamically allocated bounce buffer whose size
is exactly the size of the transfer, leading to a buffer overrun in
the fsl-cpm driver when that size is odd.
Add the missing length parity verification and remain in 8 bit mode
when the length is not even. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor()
KSAN reports use-after-free in hci_add_adv_monitor().
While adding an adv monitor,
hci_add_adv_monitor() calls ->
msft_add_monitor_pattern() calls ->
msft_add_monitor_sync() calls ->
msft_le_monitor_advertisement_cb() calls in an error case ->
hci_free_adv_monitor() which frees the *moniter.
This is referenced by bt_dev_dbg() in hci_add_adv_monitor().
Fix the bt_dev_dbg() by using handle instead of monitor->handle. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid updating compression context during writeback
Bai, Shuangpeng <sjb7183@psu.edu> reported a bug as below:
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 11441 Comm: syz.0.46 Not tainted 6.17.0 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:f2fs_all_cluster_page_ready+0x106/0x550 fs/f2fs/compress.c:857
Call Trace:
<TASK>
f2fs_write_cache_pages fs/f2fs/data.c:3078 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3290 [inline]
f2fs_write_data_pages+0x1c19/0x3600 fs/f2fs/data.c:3317
do_writepages+0x38e/0x640 mm/page-writeback.c:2634
filemap_fdatawrite_wbc mm/filemap.c:386 [inline]
__filemap_fdatawrite_range mm/filemap.c:419 [inline]
file_write_and_wait_range+0x2ba/0x3e0 mm/filemap.c:794
f2fs_do_sync_file+0x6e6/0x1b00 fs/f2fs/file.c:294
generic_write_sync include/linux/fs.h:3043 [inline]
f2fs_file_write_iter+0x76e/0x2700 fs/f2fs/file.c:5259
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x7e9/0xe00 fs/read_write.c:686
ksys_write+0x19d/0x2d0 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf7/0x470 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The bug was triggered w/ below race condition:
fsync setattr ioctl
- f2fs_do_sync_file
- file_write_and_wait_range
- f2fs_write_cache_pages
: inode is non-compressed
: cc.cluster_size =
F2FS_I(inode)->i_cluster_size = 0
- tag_pages_for_writeback
- f2fs_setattr
- truncate_setsize
- f2fs_truncate
- f2fs_fileattr_set
- f2fs_setflags_common
- set_compress_context
: F2FS_I(inode)->i_cluster_size = 4
: set_inode_flag(inode, FI_COMPRESSED_FILE)
- f2fs_compressed_file
: return true
- f2fs_all_cluster_page_ready
: "pgidx % cc->cluster_size" trigger dividing 0 issue
Let's change as below to fix this issue:
- introduce a new atomic type variable .writeback in structure f2fs_inode_info
to track the number of threads which calling f2fs_write_cache_pages().
- use .i_sem lock to protect .writeback update.
- check .writeback before update compression context in f2fs_setflags_common()
to avoid race w/ ->writepages. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
The affected lines were resulting in a NULL pointer dereference on our
platform because the device tree contained the following list of
compatible strings:
power-sensor@40 {
compatible = "ti,ina232", "ti,ina231";
...
};
Since the driver doesn't declare a compatible string "ti,ina232", the OF
matching succeeds on "ti,ina231". But the I2C device ID info is
populated via the first compatible string, cf. modalias population in
of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy
I2C device ID table either, the struct i2c_device_id *id pointer in the
probe function is NULL.
Fix this by using the already populated type variable instead, which
points to the proper driver data. Since the name is also wanted, add a
generic one to the ina2xx_config table. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()
Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function
'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function
'unregister_nvdimm_pmu'. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix NULL-deref on snapshot tear down
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Patchwork: https://patchwork.freedesktop.org/patch/525099/ |
| In the Linux kernel, the following vulnerability has been resolved:
sched/psi: use kernfs polling functions for PSI trigger polling
Destroying psi trigger in cgroup_file_release causes UAF issues when
a cgroup is removed from under a polling process. This is happening
because cgroup removal causes a call to cgroup_file_release while the
actual file is still alive. Destroying the trigger at this point would
also destroy its waitqueue head and if there is still a polling process
on that file accessing the waitqueue, it will step on the freed pointer:
do_select
vfs_poll
do_rmdir
cgroup_rmdir
kernfs_drain_open_files
cgroup_file_release
cgroup_pressure_release
psi_trigger_destroy
wake_up_pollfree(&t->event_wait)
// vfs_poll is unblocked
synchronize_rcu
kfree(t)
poll_freewait -> UAF access to the trigger's waitqueue head
Patch [1] fixed this issue for epoll() case using wake_up_pollfree(),
however the same issue exists for synchronous poll() case.
The root cause of this issue is that the lifecycles of the psi trigger's
waitqueue and of the file associated with the trigger are different. Fix
this by using kernfs_generic_poll function when polling on cgroup-specific
psi triggers. It internally uses kernfs_open_node->poll waitqueue head
with its lifecycle tied to the file's lifecycle. This also renders the
fix in [1] obsolete, so revert it.
[1] commit c2dbe32d5db5 ("sched/psi: Fix use-after-free in ep_remove_wait_queue()") |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix memory leak in qla2x00_probe_one()
There is a memory leak reported by kmemleak:
unreferenced object 0xffffc900003f0000 (size 12288):
comm "modprobe", pid 19117, jiffies 4299751452 (age 42490.264s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000629261a8>] __vmalloc_node_range+0xe56/0x1110
[<0000000001906886>] __vmalloc_node+0xbd/0x150
[<000000005bb4dc34>] vmalloc+0x25/0x30
[<00000000a2dc1194>] qla2x00_create_host+0x7a0/0xe30 [qla2xxx]
[<0000000062b14b47>] qla2x00_probe_one+0x2eb8/0xd160 [qla2xxx]
[<00000000641ccc04>] local_pci_probe+0xeb/0x1a0
The root cause is traced to an error-handling path in qla2x00_probe_one()
when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is
used to record the port information and it is allocated in
qla2x00_create_host(). However, it is not released in the error handling
path "probe_failed".
Fix this by freeing the memory of "scan.l" when an error occurs in the
adapter initialization process. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reject negative ifindex
Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs
in an xarray")) refactored the handling of pre-assigned ifindexes
and let syzbot surface a latent problem in ovs. ovs does not validate
ifindex, making it possible to create netdev ports with negative
ifindex values. It's easy to repro with YNL:
$ ./cli.py --spec netlink/specs/ovs_datapath.yaml \
--do new \
--json '{"upcall-pid": 1, "name":"my-dp"}'
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
$ ip link show
-65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff
...
Validate the inputs. Now the second command correctly returns:
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
lib.ynl.NlError: Netlink error: Numerical result out of range
nl_len = 108 (92) nl_flags = 0x300 nl_type = 2
error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'}
Accept 0 since it used to be silently ignored. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: ftrace: Fixup panic by disabling preemption
In RISCV, we must use an AUIPC + JALR pair to encode an immediate,
forming a jump that jumps to an address over 4K. This may cause errors
if we want to enable kernel preemption and remove dependency from
patching code with stop_machine(). For example, if a task was switched
out on auipc. And, if we changed the ftrace function before it was
switched back, then it would jump to an address that has updated 11:0
bits mixing with previous XLEN:12 part.
p: patched area performed by dynamic ftrace
ftrace_prologue:
p| REG_S ra, -SZREG(sp)
p| auipc ra, 0x? ------------> preempted
...
change ftrace function
...
p| jalr -?(ra) <------------- switched back
p| REG_L ra, -SZREG(sp)
func:
xxx
ret |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on direct node in truncate_dnode()
syzbot reports below bug:
BUG: KASAN: slab-use-after-free in f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
Read of size 4 at addr ffff88802a25c000 by task syz-executor148/5000
CPU: 1 PID: 5000 Comm: syz-executor148 Not tainted 6.4.0-rc7-syzkaller-00041-ge660abd551f1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
print_report mm/kasan/report.c:462 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:572
f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
truncate_dnode+0x229/0x2e0 fs/f2fs/node.c:944
f2fs_truncate_inode_blocks+0x64b/0xde0 fs/f2fs/node.c:1154
f2fs_do_truncate_blocks+0x4ac/0xf30 fs/f2fs/file.c:721
f2fs_truncate_blocks+0x7b/0x300 fs/f2fs/file.c:749
f2fs_truncate.part.0+0x4a5/0x630 fs/f2fs/file.c:799
f2fs_truncate include/linux/fs.h:825 [inline]
f2fs_setattr+0x1738/0x2090 fs/f2fs/file.c:1006
notify_change+0xb2c/0x1180 fs/attr.c:483
do_truncate+0x143/0x200 fs/open.c:66
handle_truncate fs/namei.c:3295 [inline]
do_open fs/namei.c:3640 [inline]
path_openat+0x2083/0x2750 fs/namei.c:3791
do_filp_open+0x1ba/0x410 fs/namei.c:3818
do_sys_openat2+0x16d/0x4c0 fs/open.c:1356
do_sys_open fs/open.c:1372 [inline]
__do_sys_creat fs/open.c:1448 [inline]
__se_sys_creat fs/open.c:1442 [inline]
__x64_sys_creat+0xcd/0x120 fs/open.c:1442
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is, inodeA references inodeB via inodeB's ino, once inodeA
is truncated, it calls truncate_dnode() to truncate data blocks in inodeB's
node page, it traverse mapping data from node->i.i_addr[0] to
node->i.i_addr[ADDRS_PER_BLOCK() - 1], result in out-of-boundary access.
This patch fixes to add sanity check on dnode page in truncate_dnode(),
so that, it can help to avoid triggering such issue, and once it encounters
such issue, it will record newly introduced ERROR_INVALID_NODE_REFERENCE
error into superblock, later fsck can detect such issue and try repairing.
Also, it removes f2fs_truncate_data_blocks() for cleanup due to the
function has only one caller, and uses f2fs_truncate_data_blocks_range()
instead. |
