| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| In the Linux kernel, the following vulnerability has been resolved:
futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock
When FUTEX_CMP_REQUEUE_PI requeues a non-top waiter that already owns the
target PI futex, task_blocks_on_rt_mutex() returns -EDEADLK before setting
waiter->task.
The subsequent remove_waiter() in rt_mutex_start_proxy_lock() dereferences
the NULL waiter->task, causing a kernel crash.
Add a self-deadlock check for non-top waiters before calling
rt_mutex_start_proxy_lock(), analogous to the top-waiter check in
futex_lock_pi_atomic(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: use correct flags for device private PMD entry
Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") updated set_pmd_migration_entry() to use
pmdp_huge_get_and_clear() in the softleaf case, but made no further
adjustments to the function itself.
Therefore this function continues to incorrectly use pmd_write(),
pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed
migration entry should be marked writable, softdirty or uffd-wp
respectively.
Whilst all are incorrect, the most problematic of these is pmd_write(), as
this can lead to corrupted rmap state.
On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling
pmd_write() on a softleaf will return the softdirty state encoded in the
entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled.
This was observed when running the hmm.hmm_device_private.anon_write_child
selftest:
1. The test faults in a range then migrates it such that a device-private
THP range is established.
2. The parent then migrates it to a device-private writable PMD entry whose
folio is entirely AnonExclusive with entire_mapcount=1, softdirty set
(accidentally correct write state).
3. The parent forks and the PMD entries are set to device-private read only
entries, entire_mapcount=2, softdirty still set.
4. [BUG] The child writes to the range then migrates to RAM - intending to
install non-writable migration entries - but replacing parent and child
PMD mappings with WRITABLE entries due to misinterpreting the softdirty
bit.
5. In remove_migration_pmd(), if !softleaf_is_migration_read(entry) we
set the RMAP_EXCLUSIVE flag when calling folio_add_anon_rmap_pmd() for
both parent and child, which are therefore AnonExclusive.
6. [SPLAT] Child sets migrated folio entire_mapcount=1, parent sets
entire_mapcount=2 and we end up with an AnonExclusive folio with
entire_mapcount=2! Assert fires in __folio_add_anon_rmap():
VM_WARN_ON_FOLIO(folio_test_large(folio) &&
folio_entire_mapcount(folio) > 1 &&
PageAnonExclusive(cur_page), folio)
This patch fixes the issue by correctly referencing the softleaf entry
fields for writable, softdirty and uffd-wp in set_pmd_migration_entry().
It also only updates A/D flags if the entry is present as these are
otherwise not meaningful for a softleaf entry.
This patch also flips the if (!present) { ... } else { ... } logic in
set_pmd_migration_entry() so it is easier to understand, and adds some
comments to make things clearer.
I was able to bisect this to commit 775465fd26a3 ("lib/test_hmm: add zone
device private THP test infrastructure") which first exposes this bug as
it was the commit that permitted test_hmm to generate the test.
However commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") is the commit that actually enabled this
behaviour. |
| Rclone is a command-line program to sync files and directories to and from different cloud storage providers. From 1.46.0 until 1.74.3, rclone rcd --rc-serve accepts unauthenticated GET and HEAD requests to paths of the form: /[remote:path]/object. The remote value is parsed from the URL and passed to normal backend initialization. Inline remote configuration can set backend options that execute local commands during initialization. As a result, a single unauthenticated GET or HEAD request can execute a command as the rclone process user. This vulnerability is fixed in 1.74.3. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix global performance monitor reference counting
In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on
the perfmon it returns, but v3d_perfmon_set_global_ioctl() and
v3d_perfmon_delete() fail to release that reference on several paths:
1. v3d_perfmon_set_global_ioctl() leaks the reference on its error
paths.
2. CLEAR_GLOBAL leaks both the find reference and the reference
previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl
that configured it.
3. Destroying a perfmon that is the current global perfmon leaks the
reference stashed by the SET_GLOBAL ioctl.
Release each of these references explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL dereference in get_queue_ids()
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
(cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend"
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) |
| An attacker can send a web request that causes unlimited memory
allocation in the internal web server, leading to a denial of service.
The internal web server is disabled by default. |
| A vulnerability in Apache Kvrocks.
This issue affects Apache Kvrocks: from 2.2.0 through 2.15.0.
Users are recommended to upgrade to version 2.16.0, which fixes the issue. |
| Relative Path Traversal vulnerability in Apache Kvrocks.
This issue affects Apache Kvrocks: from 1.0.0 through 2.15.0.
Users are recommended to upgrade to version 2.16.0, which fixes the issue. |
| Unauthenticated Cross Site Scripting (XSS) in Royal Elementor Addons Pro < 1.7.1041 versions. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in StylemixThemes Motors allows PHP Local File Inclusion.
This issue affects Motors: from n/a through 1.4.109. |
| Missing Authorization in the server management routes (routes/admin.php) in Azuriom Azuriom CMS before 1.2.11 on all platforms allows an authenticated attacker with the admin.access permission to create AzLink server tokens and take over non-admin user accounts by changing their passwords and email addresses via crafted HTTP requests to /admin/servers/create and the AzLink API endpoints (/api/azlink/password, /api/azlink/email, /api/azlink/user/{id}). |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in StylemixThemes Motors allows Blind SQL Injection.
This issue affects Motors: from n/a through 1.4.109. |
| A flaw was found in Katello's of Red Hat Satellite. A content upload functionality where insufficient authorization checks in the ContentUploadsController allowed users with the edit_products permission to query content information for repositories outside the products they were authorized to manage. An authenticated attacker could exploit this issue to determine whether specific content exists within repositories that should otherwise be inaccessible. This issue does not allow unauthorized modification, import, or publication of content. |
| @tryghost/activitypub is Ghost’s social/federation client app. Prior to 3.1.0, the ActivityPub client in Ghost was vulnerable to JavaScript injection on posts shared by a maliciously customised ActivityPub server. This vulnerability is fixed in 3.1.0. |
| Ghost is a Node.js content management system. From 5.46.1 until 6.21.2, the validation applied to filters on the public API endpoints could be partially bypassed, making it possible to reveal private fields via a brute force attack. If SQLite was used as the database password hashes were fully accessible. If MySQL was used as the database the password hashes' case (uppercase / lowercase) would have been lost, which would likely have rendered a further brute force attack on the discovered hashes fruitless. This vulnerability is fixed in 6.21.2. |
| Ghost is a Node.js content management system. From 6.19.4 until 6.21.1, insufficient validation of the client-supplied Content-Type on Ghost's Admin API file upload endpoint allowed uploaded files to be served from the site with an attacker-chosen content type on S3/GCS storage backends. On installations that serve uploaded files from the same origin as the site, this could have been used to facilitate stored cross-site scripting against site visitors or staff. This vulnerability is fixed in 6.21.1. |
| Ghost is a Node.js content management system. From 5.18.0 until 6.21.1, a discrepancy in responses from the members signin endpoints made it possible for an unauthenticated attacker to determine whether a given email address belongs to a registered member of a Ghost site. This vulnerability is fixed in 6.21.1. |
| Ghost is a Node.js content management system. From 6.19.4 until 6.21.1, when re-rendering posts, Ghost would refetch missing image dimensions by issuing an outbound HTTP request to the URL stored on an image card — without restricting that URL to trusted image hosts. An authenticated staff user able to create or edit posts could therefore point an image card at an attacker-chosen host and cause the Ghost server to request it on their behalf, including hosts on internal networks or cloud instance metadata endpoints that would not normally be reachable from the public internet. This vulnerability is fixed in 6.21.1. |
