Export limit exceeded: 430029 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (430029 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99366 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: don't modify a session slot when replaying its cached reply nfsd4_sequence() claims a session slot by setting NFSD4_SLOT_INUSE under nn->client_lock. A reply served from the slot's reply cache does not claim it, and that distinction lived only in cstate->status, which nfsd4_sequence() set to nfserr_replay_cache. Commit cc028a10a48c ("NFSD: Hoist status code encoding into XDR encoder functions") moved nfsd4_proc_compound()'s cstate->status assignment below the out: label, and the replay path's goto out was the one path that relied on skipping it. The test in nfsd4_sequence_done() therefore no longer identifies a replay, and every replay now stores its reply and clears NFSD4_SLOT_INUSE as though it owned the slot. NFSD4_SLOT_INUSE is the interlock: check_slot_seqid() rejects every sequence id for a slot that is in use, before replay_matches_cache() runs. A replay never sets it, so two replays can be in flight on the same slot at once. One can read slot->sl_cred under nn->client_lock while the other's completion frees and rebuilds it from the XDR encoder without that lock. Two completions can also collide with each other and release the same group_info twice. free_svc_cred() leaves cr_uid, cr_gid and cr_flavor intact, so the reader passes every earlier test in same_creds() and dereferences a NULL cr_group_info. From a 6.12.91 production server: BUG: kernel NULL pointer dereference, address: 0000000000000004 CPU: 63 UID: 0 PID: 39015 Comm: nfsd RIP: 0010:same_creds+0x38/0xa0 [nfsd] RDX: 0000000000000000 Call Trace: nfsd4_sequence+0x6a8/0x910 [nfsd] nfsd4_proc_compound+0x345/0x670 [nfsd] nfsd_dispatch+0x100/0x220 [nfsd] svc_process_common+0x311/0x700 [sunrpc] svc_process+0x131/0x1c0 [sunrpc] svc_recv+0x7ef/0x9c0 [sunrpc] nfsd+0xa3/0x100 [nfsd] Kernel panic - not syncing: Fatal exception Since v6.14 a live session's slot table can shrink, and the unowned store becomes a use-after-free write. nfsd4_sequence() defers the shrink while a slot is in use, but it tests NFSD4_SLOT_INUSE, which a replay does not set, so free_session_slots() can kfree() the slot the replay still holds in cstate->slot. Record the claim in cstate->slot_owned when nfsd4_sequence() accepts a request and test that in nfsd4_sequence_done(), so only the request that claimed the slot updates its cached reply and clears NFSD4_SLOT_INUSE. svc_generic_init_request() zeroes the compound response before each request, so the flag starts clear. | ||||
| CVE-2026-99365 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix id-to-name cache entry leak in idtoname_parse() idtoname_lookup() returns the id-to-name cache entry with a new reference. The name is parsed between the lookup and the update call, and when the parsed name is malformed (negative length or longer than IDMAP_NAMESZ), idtoname_parse() jumps to the error label without dropping the reference returned by idtoname_lookup(), leaking the cache entry. Release the reference with cache_put() before taking the error exit. | ||||
| CVE-2026-99362 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: preflight SEQUENCE replies before accepting a slot nfsd4_sequence() narrows the reply buffer to the session's cached reply limit before it accepts the slot seqid. A client may negotiate ca_maxresponsesize_cached down to NFSD_MIN_HDR_SEQ_SZ, and nfsd4_alloc_slot() then gives every slot a zero-length sl_data[]. A COMPOUND tag can fill that narrowed buffer until it holds the SEQUENCE opcode but not the status word that follows. nfsd4_encode_operation() returns without running nfsd4_encode_sequence(), so cstate.data_offset stays zero. It leaves op->status at nfs_ok as well, so the COMPOUND is treated as having succeeded. nfsd4_store_cache_entry() declines to cache a lone SEQUENCE that returned an error. That test reads the status the operation reported, so it passes here. The copy starts at offset zero and takes the whole reply, RPC and COMPOUND headers included, into the zero-length sl_data[]. The COMPOUND tag is copied along with it, so the client picks most of the bytes written past the end of the slot: BUG: KASAN: slab-out-of-bounds in read_bytes_from_xdr_buf+0x1bc/0x390 Write of size 80 at addr ffff888003a549cd by task kunit_try_catch/24 __asan_memcpy+0x38/0x60 read_bytes_from_xdr_buf+0x1bc/0x390 nfsd4_sequence_done+0x5b0/0x810 nfs4svc_encode_compoundres+0x1bf/0x240 Check that the fixed-size SEQUENCE result, plus room for a following operation's error status, fits the negotiated limit before narrowing the buffer and consuming the slot seqid. The slot and its reply cache are left unchanged, as RFC 8881 Section 2.10.6.1.2 requires of an error returned from SEQUENCE. | ||||
| CVE-2026-99361 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: propagate SETXATTR value decode errors nfsd4_decode_setxattr() stores the status returned while assembling a non-empty attribute value, but then unconditionally returns nfs_ok. An allocation failure can therefore leave a NULL value buffer paired with a non-zero length and allow compound processing to continue. Return the decoder status so that the operation stops on the original error. | ||||
| CVE-2026-99358 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: zero NFSv4 COMPOUND tag padding nfs4svc_encode_compoundres() copies the tag bytes into reserved XDR space and skips directly to the aligned end of the field. xdr_reserve_space() rounds the reservation up but does not initialize the padding bytes. A remote client can choose a tag length that is not a multiple of four, causing one to three stale bytes from the response page to be returned in the COMPOUND reply. Use xdr_encode_opaque_fixed() to copy the tag and clear its XDR padding. | ||||
| CVE-2026-99357 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Copy the deferred RPC Call from the head buffer svc_defer() snapshots the RPC Call for replay once a pending cache upcall resolves. It copies the Call starting (rq_arg.len - head[0].iov_len) bytes before head[0].iov_base, a back-up that once covered a transport header. No transport has had one since commit 983084b2672c ("SUNRPC: Remove svc_rqst::rq_xprt_hlen"), so the two lengths are meant to be equal. An RPCSEC_GSS Call breaks that assumption. Unwrapping the integrity service truncates rq_arg.len by the length of the trailing checksum, and unwrapping the privacy service leaves rq_arg.len short by an amount the client sets with trailing bytes after the wrap token. Neither adjusts head[0].iov_len. Both lengths are size_t, so the subtraction underflows and the copy starts past head[0].iov_base. Every deferred integrity Call replays a shifted snapshot. A deferred replay skips GSS verification, so a shifted snapshot runs as an authenticated Call. With the privacy service the offset is client-chosen. A forged Call placed in that window, naming another user's GSS context handle, runs under that identity. Copy the Call from head[0].iov_base. Refuse to defer a Call whose length runs past the head buffer, so the copy cannot read out of bounds. | ||||
| CVE-2026-99354 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: pin gss module across auth_domain RCU free A gss auth_domain stores a raw pointer to svcauthops_gss in dom->flavour, and its release queues svcauth_gss_domain_release_rcu() via call_rcu(). Both live in auth_rpcgss.ko text, and nothing pins the module while a domain referencing it is reachable. rmmod auth_rpcgss can therefore unmap that text while an NFSD export still holds a reference to the domain. The export cache is one such holder. When the export is finally released, the domain reference drops from module text: svc_export_put() auth_domain_put(exp->ex_client) auth_domain_release() dom->flavour->domain_release(dom) /* into module text */ svcauth_gss_domain_release() call_rcu(&dom->rcu_head, svcauth_gss_domain_release_rcu) Once auth_rpcgss is unloaded, the domain_release call lands in unmapped memory. The rcu_barrier() in exit_rpcsec_gss() does not help: it waits only for callbacks already queued, and this one is not queued until the export goes away. NFSD's NFSv4 objects import symbols from auth_rpcgss.ko, so only a server built without CONFIG_NFSD_V4 can unload auth_rpcgss while exports still name a gss domain. Take a module reference in svcauth_gss_register_pseudoflavor() before publishing the domain and drop it at the end of svcauth_gss_domain_release_rcu(). The rcu_barrier() then holds the module image until this callback has returned. [ cel: rewrote description ] | ||||
| CVE-2026-99352 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: trace an accepted transport before publishing it svc_handle_xprt() publishes a newly accepted transport before tracing it. svc_add_new_temp_xprt() places the transport on sv_tempsocks and clears XPT_BUSY, so another nfsd thread can dequeue it at once. If the peer has already closed the connection, that thread runs svc_delete_xprt(), which drops the list reference, the only reference the new transport holds. trace_svc_xprt_accept() then reads the transport's addresses and network namespace from freed memory. Before publication the accepting thread owns the transport exclusively: XPT_BUSY is still set from svc_xprt_init() and the transport is on no list. Emit the tracepoint there. [ cel: trace before publication instead of taking an extra reference ] | ||||
| CVE-2026-99350 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix update of call->tx_pending without holding lock Currently, rxrpc_send_data() updates call->tx_pending just before it returns - but it won't be holding the call->user_mutex when it does this if a wait was interrupted by a signal. This would allow a parallel sendmsg() to race. Further, both the callers of rxrpc_send_data() call it with the lock held, and then it returns an indication through the parameter list to say whether it has dropped the lock or not - after which the callers both just drop the lock if it's still held. Fix this by: (1) Moving the release of call->user_mutex down into rxrpc_send_data() and get rid of the indicator parameter. This makes it easier to see where the lock is held. (2) After waiting, if the attempt to reacquire the mutex is interrupted, just return directly there rather than going to out_unlock (3) Restricting the txb variable to inside the buffering loop and leaving ->tx_pending set until we've queued the buffer. Note that there's a slight change in behaviour in that wait_for_space failure now doesn't check for completion because it doesn't hold the call user_mutex. The caller, however, should re-issue the send and pick up any error at a second attempt. | ||||
| CVE-2026-99348 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix afs to abort the rxrpc call on send error Fix afs_send_empty_reply() and afs_send_simple_reply() to always try to abort the rxrpc call rather than just aborting on -ENOMEM and otherwise abandoning it. If the call is already complete due to network failure or a received abort, this will do nothing. Also make afs_make_call() always abort on send error; again, it does nothing if the rxrpc call is already dead. | ||||
| CVE-2026-99345 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Reject KVM_SET_NESTED_STATE if L1 has EFER.LMA=1 && EFER.LME=0 Reject KVM_SET_NESTED_STATE if the incoming L1 host state has what is effectively an impossible EFER combination of LMA=1 but LME=0, i.e. if the state says long mode is active but not enabled. Unlike VMX, SVM doesn't have an explicit consistent check for the illegal combination; presumably hardware simply ignores EFER.LMA if EFER.LME=0. Unfortunately, KVM doesn't ignore EFER.LMA in this case and consumes the illegal state when constructing the shadow MMU for L2. E.g. if userspace also clears CR4.PAE, then kvm_calc_cpu_role() will compute a role with 4 or 5 levels of paging, but shadow_mmu_init_context() will wire up the MMU to use the paging32 template, which maxes out its levels at 2. Note, the "real badness" is effectively the same as what happened with the nVMX bug fixed by commit 112e66017bff ("KVM: nVMX: add missing consistency checks for CR0 and CR4"). Unfortunately, the sanity check added by commit 72e2fb24a0b0 ("KVM: x86/mmu: Bug the VM if a vCPU ends up in long mode without PAE enabled") doesn't work for this case, since L2 state is active at the time of the page fault, but it's L1 that has the bad state. | ||||
| CVE-2026-99343 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bug the VM if KVM attempts to walk more levels than the MMU has Extend the "EFER.LMA && !CR4.PAE" check, which exists largely to guard against KVM configuring a paging32 MMU with more than 2 levels of paging, with a very explicit check for exactly that: that KVM isn't trying to walk more levels of paging than the MMU template provides. I.e. harden KVM against all bugs that would cause KVM to generates accesses beyond the bounds of guest_walker's arrays, regardless of how KVM ended up with the misconfigured MMU. Note, don't use w->cpu_role.base.level directly as the paging64 template only provides two levels of page tables for PAE paging on 32-bit hosts, and handles the third level by manually emulating the PDPTR access. | ||||
| CVE-2026-99341 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Request event processing for exception VM-Exits Request event processing whenever kvm_queue_exception_vmexit() queues an exception VM-Exit. Most callers reach the helper through kvm_multiple_exception(), which already sets KVM_REQ_EVENT, but nested asynchronous page faults call it directly. Without another event request, vcpu_enter_guest() skips kvm_check_and_inject_events() and re-enters L2. A subsequent VM-Exit can clear the pending exception while reconstructing vectoring state, losing the synthetic #PF VM-Exit. The APF reason remains PAGE_NOT_PRESENT and a later regular #PF can consume the stale value. Setting KVM_REQ_EVENT in the common helper ensures that L1 receives the queued VM-Exit before KVM re-enters L2. | ||||
| CVE-2026-99339 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Zero reserved synic flags when delivering message to avoid stack leak Ensure all reserved flags are zeroed when setting the msg_pending flag as part of SynIC message delivery, as setting only msg_pending can leak seven bits of kernel stack data to the guest. E.g. gcc typically uses a bitwise-OR to set the msg_pending flag, without initializing the on-stack variable. Precisely zero the flags, e.g. as opposed to zeroing the entire structure, to make it somewhat more obvious that the flags *need* to be zeroed. E.g. it would be quite easy to misread the initial read of guest memory and think that zeroing the entire structure is completely superfluous. | ||||
| CVE-2026-99338 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Notify VM exit Enable Notify VM exit functionality for TDX guests. Notify VM exit is an existing feature supported by KVM. Userspace can enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Notify VM exit for TDX guests by: - Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS bits are set. Since TDX vCPU cannot be reset, it only needs to be configured once when initializing the TDX vCPU. - Adding corresponding exit handler for TDX Notify VM Exit. Notify VM exit can happen when executing the IRET instruction. If the IRET unblocks the NMI blocking state, bit 12 of the exit qualification is set. In this case, the VMM needs to restore the "blocked by NMI" state when it decides to re-enter the guest. For TDX, KVM cannot manage the GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to handle it. Extract the common part without NMI blocking handling into a helper in common.h so that it can be shared between VMX and TDX. Note, KVM uses "pre-production" terminology for the feature formally called Notify VM-Exit. All public versions of the SDM refer to the feature as Instruction Timeout. This will be remedied in the near future, for now, use KVM's terminology for consistency. Note, #2, there is no enumeration bit for Notify VM exit by TDX module because all TDX modules support it, and allow to set the corresponding TD VMCS fields as long as the hardware supports the feature. | ||||
| CVE-2026-99336 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: take the invalidate lock when unbinding a dying file kvm_gmem_unbind() takes mapping->invalidate_lock only if the get_file_active() succeeds. When the guest_memfd file is dying, its reference count is already zero so get_file_active fails and the binding is removed without holding the invalidate lock. kvm_gmem_invalidate_{start,end}() checks f->bindings independently to decide whether to begin or end KVM MMU invalidation. So, the bindings must therefore remain stable between the two calls. Otherwise, unbind can remove a binding after start increments mmu_invalidate_in_progress, but before end finds the binding and decrements it. Example, unbind race with memory failure: CPU 0: memory failure CPU 1: memslot delete ---------------------------------- --------------------------- (guest_memfd file is dying) kvm_gmem_error_folio() kvm_gmem_invalidate_start() finds binding mmu_invalidate_in_progress++ kvm_gmem_unbind() get_file_active() fails removes binding kvm_gmem_invalidate_end() no binding found counter stays elevated mmu_invalidate_retry() then returns 1 forever, so guest page faults retry without ever installing a mapping and the guest hangs. Remove the distinction between live and dying files in the unbind path. Always use slot->gmem.file and take the invalidate lock when it's non-NULL. Normal unbind callers hold slots_lock, which prevents release from clearing the pointer or freeing the file state until unbind completes. Final VM teardown can only see a NULL pointer because guest_memfd pins the KVM until release has cleared all bindings. | ||||
| CVE-2026-99333 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Use report type from request node Use report type from request node while sending feature and input reports to HID core. The cli_data report type array is never assigned and feature reports are sent as input reports. | ||||
| CVE-2026-99332 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix out-of-bounds left shift by 32 in s32ton() Syzbot reported an out-of-bounds shift (32-bit integer shifted left by 32) in the s32ton() routine in the HID core. This routine converts a signed 32-bit integer to a signed n-bit integer, and it caps the value of n at 32. But when n == 32 there's no need to do anything; it can simply return the input value. This will avoid calculating (1 << n) when n is 32, which was the cause of the invalid shift. | ||||
| CVE-2026-99331 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: cp2112: validate response report lengths The HID core invokes raw_event callbacks before validating the report length. cp2112_raw_event() reads every field of a transfer status response without checking size. For a data response, it reads the length at offset two and copies that many bytes from offset three, again without ensuring that the input report contains them. Require a complete transfer status structure. For data responses, first require the header and then ensure the clamped payload length fits in the received report before copying it. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus. | ||||
| CVE-2026-99330 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2200: validate READ_ALL response length The HID core invokes raw_event callbacks before validating the report length. mcp2200_raw_event() casts a READ_ALL response to struct mcp_read_all_resp and reads fields through offset ten without checking that the response contains the structure. A one-byte READ_ALL response reproduced the issue under KASAN: BUG: KASAN: slab-out-of-bounds in mcp2200_raw_event+0x24b/0x3a0 Read of size 1 by task hidtrigger/89 Call Trace: mcp2200_raw_event+0x24b/0x3a0 kasan_report+0x139/0x170 Reject an incomplete READ_ALL response with a protocol error before reading its fields. The common completion path then wakes the command waiter with the error instead of leaving it to time out. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus. | ||||