| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: validate tracker padding before forwarding
A multicast tracker with an even number of destinations needs two
padding bytes after its destination list. batadv_mcast_forw_packet()
currently only checks that the count field and the addresses fit in
the tracker TVLV.
If an unpadded even tracker is compacted to an odd number of
destinations, batadv_mcast_forw_shrink_update_headers() includes those
missing padding bytes in the amount to remove. The subsequent memmove
can then write two bytes past the old packet tail. With no tailroom,
this corrupts skb_shared_info.
Include the required padding in the existing tracker length check.
This rejects the malformed tracker before either received or locally
generated packets can reach the compactor. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop originator purge worker before freeing TT
batadv_mesh_free() releases the translation tables via batadv_tt_free()
before batadv_originator_free() stops orig_work. The purge worker can
therefore still run while the TT is torn down. When an originator times
out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which
loads tt.global_hash and walks all buckets while taking their locks:
CPU0 CPU1
batadv_tt_free() batadv_purge_orig()
batadv_tt_global_del_orig()
hash = ...tt.global_hash;
batadv_tt_global_table_free()
batadv_hash_destroy(hash);
spin_lock_bh(&hash->list_locks[i]);
Disable orig_work at the beginning of batadv_mesh_free(), directly after
the mesh was marked as deactivating. The second
disable_delayed_work_sync() in batadv_originator_free() is harmless because
it is free'd anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: don't drop local events queued during TVLV update
batadv_tt_tvlv_container_update() read the number of local changes without
holding changes_list_lock. batadv_tt_local_event() is not serialized by
the commit_lock and can queue new events before the changes_list is
flushed:
CPU0 CPU1
batadv_tt_tvlv_container_update()
num = ...local_changes;
batadv_tt_local_event()
list_add_tail(...);
...local_changes++;
spin_lock_bh(&...changes_list_lock);
/* only num events copied but all freed */
The additional events were freed without ever being sent. Other nodes will
only notice this via a CRC mismatch and must request the full table.
The number of changes and the changes_list must therefore be taken
atomically. Events queued afterwards then stay in the tt.changes_list for
the next TT round.
The changes can no longer be kept for the next round when the TVLV buffer
allocation fails. But they would be sent with a skipped TTVN anyway, so the
other nodes have to request the full table in this case either way. The
last changeset is only dropped in this case when the TTVN was incremented.
Without new changes, it still describes the current TTVN.
Previously, the unconsumed changes caused a retry of the TVLV container
update in the next commit round. Since the changes are now consumed, the
next round would only take the path without changes and wait for
BATADV_TT_OGM_APPEND_MAX rounds before updating the container again. Until
then, the outdated container with the previous TTVN would still be
announced. The ogm_append_cnt is therefore reset on failure to retry the
update in the next OGM interval.
This doesn't make the CRC consistent with the announced changeset. The
local table modifications are still not serialized with the commit and
batadv_tt_local_transition_new() can still make a client part of the CRC
for which the event is only part of the next TT round. Such an
inconsistency is detected by the CRC check of the other nodes and solved
via a full table request. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: sysfs: restore NOFS context on early return in btrfs_sysfs_add_block_group_type()
btrfs_sysfs_add_block_group_type() sets up a NOFS context with
memalloc_nofs_save() because kobject_add() performs GFP_KERNEL
allocations deep in its call chain, and the function may be called
while holding a transaction handle or a lock required for a
transaction commit, where reclaim could deadlock.
Every other return path of this function calls memalloc_nofs_restore()
except the early return taken when another thread has already created
the kobject for the same raid index (this can happen when restriping).
Taking that path leaves PF_MEMALLOC_NOFS set on the calling task, so
all subsequent memory allocations performed by that task remain
restricted to the NOFS scope, which may lead to unexpected allocation
failures or deadlocks later on.
Restore the NOFS context before returning from that path. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: revert fsids on durable reconnect and replay failure
On a durable handle reconnect or a request replay, smb2_open() switches
to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call
fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at
err_out1. The user's credentials then stay installed on the shared ksmbd
worker. Later work on that worker, including other users' requests, runs
with the first user's fsuid, fsgid and supplementary groups.
ksmbd_free_work_struct() also warns, because work->saved_cred is still
set.
Jump to err_out1 instead. No path is held at this point, so skipping the
path_put() at err_out is correct. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams
When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after
hda_sdw_bpt_send_async() has already started the TX and RX DMA streams,
intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly
without calling hda_sdw_bpt_wait(). As a result,
hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while
the DMA hardware is still running.
Disable any running TX or RX BPT DMA stream at the start of
hda_sdw_bpt_close() before unmapping channels and depreparing DMA
resources. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: fix truncate hang in large swap entry
Truncating a tmpfs file or memfd to a page-aligned size inside a large
swap entry can loop indefinitely in shmem_undo_range(). The task holds
the inode lock and cannot be killed.
A large swap entry represents a whole swapped-out folio. For example,
truncate a file whose pages 0-7 share one swap entry to four pages:
[ 0 1 2 3 | 4 5 6 7 ]
keep | discard
^
new EOF, start = 4
i_size has already been updated when boundary handling asks
shmem_get_partial_folio() for page 4. Since it is swapped out, the helper
calls shmem_get_folio() with SGP_READ. That rejects page 4 with -EINVAL
because its starting offset equals i_size. Nothing is read back.
The final scan cannot free the entry without losing pages 0-3. It skips
it, restarts from start = 4, and finds it again indefinitely. An unaligned
truncate avoids this particular failure because the requested page starts
below i_size. Folios already in the page-cache cannot trigger it as the
direct lookup will return them beyond EOF.
Fix it by letting shmem_get_partial_folio() call shmem_swapin_folio()
directly for swap entries. This bypasses the read path's i_size check,
allowing the existing boundary handling to zero and split the folio. If
swap-in returns a smaller folio, it also splits the swap entry so the
final scan can free the entries beyond EOF. Retry the lookup if the entry
changes during swap-in.
Handling swap-in allocation failures remains broken and is unchanged by
this commit. Even when shmem_swapin_folio() correctly returns -ENOMEM
instead of -EEXIST, shmem_get_partial_folio() returns NULL and
shmem_undo_range() skips boundary handling. If the large swap entry
remains intact, truncation can still loop in the final scan, while hole
punching can return without zeroing the boundary.
This may read an entire large folio back from swap while holding
i_rwsem, only to discard part of it. Avoiding that I/O would require
splitting both the swap entry and any large folio still in the swap
cache. That, however, is much bigger work. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: make shmem_file() check the file's inode
shmem_file() only checks if file->f_mapping is a shmem mapping. This
mapping can belong to another file, however, as with a Coda file backed
by a tmpfs container after mmap().
So it does not guarantee that the file inode is an actual shmem inode.
Seal handling and memfd preservation use this check before accessing
shmem inode state, so they can access an inode of the wrong type.
Let's make shmem_file() check the inode's file operations instead, to
identify shmem inodes reliably. This will identify regular shmem inodes,
including memfds and ordinary tmpfs files, independently of wrapper file
operations.
Use shmem_mapping() in collapse_file() instead to not change the behavior
of collapse_file(): it operates on the page cache and uses mapping->host
for shmem inode operations. Focusing on the file does not seem relevant. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: read mapping->a_ops->free_folio under i_lock
memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops
after the inode has been freed. Once the folio is deleted from the
pagecache it no longer pins the mapping, so after i_lock is dropped
e.g., a concurrent final iput() can evict and free the inode before
filemap_free_folio() looks up mapping->a_ops->free_folio.
Most callers hold a reference on the inode, but not all.
Documentation/filesystems/vfs.rst explicitly states that ->free_folio()
must not assume the original address_space mapping still exists.
Fix it by loading ->free_folio while i_lock is still held, similar to
what folio_unmap_invalidate() does.
Inline filemap_free_folio() into its remaining caller such that
delete_from_page_cache_batch() also just loads the callback before
dropping the i_lock.
The bug was found by code inspection and has not been reproduced.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: get rid of filemap_free_folio() entirely; improve patch description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: properly handle refcounted PUD mappings on fork
copy_huge_pud() copies device-DAX entries without taking a folio reference
or updating mapcounts and the child's RSS.
For example, MADV_GUARD_INSTALL sets VM_MAYBE_GUARD on a device-DAX VMA,
forcing copy_page_range() to traverse the whole VMA on fork. Any remaining
huge PUDs are then copied without accounting for the new mappings.
Unmapping them in the child decrements accounting that was never added.
Use vm_normal_page_pud() to identify refcounted mappings. Take a folio
reference and add the child's PUD rmap and RSS accounting before installing
the copied entry. Pass src and dst VMAs consistently instead of src and
dst MM. Move the TODO. |
| In the Linux kernel, the following vulnerability has been resolved:
cipso: fix optlen corruption in cipso_v4_delopt()
cipso_v4_delopt() recomputes the option length by walking the option
buffer after the CIPSO option has been moved out. The walk then reads
the stale bytes at the tail of the buffer as option data, and a crafted
setsockopt(IP_OPTIONS) buffer can make it treat one of them as an option
length, increasing opt->opt.optlen beyond the valid option data.
The corrupted length stays on the socket and is later used as the copy
length by getsockopt(IP_OPTIONS) and by the udp/raw/ping sendmsg paths,
where it exceeds the size of the buffers they copy into.
Compute the new length from the intact options before the move and
subtract the CIPSO length, and fill the padding with IPOPT_END. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/q54sj108a2) Add missing NULL pointer check
When CONFIG_DEBUG_FS is enabled and per-client PMBus debugfs directory
creation fails during pmbus_do_probe(), q54sj108a2_probe() passes the NULL
pointer returned by pmbus_get_debugfs_dir() to debugfs_create_dir()
without validation, creating its debugfs directory at the debugfs root
instead of under the client directory.
If pmbus_init_debugfs() fails to create the client directory, data->debugfs
is left as NULL or an ERR_PTR, which pmbus_get_debugfs_dir() converts to
NULL. Passing a NULL parent to debugfs_create_dir() places q54sj108a2_dir
in the root of the debugfs filesystem and populates it with attribute files
whose private data pointers reference psu->debugfs_entries. Because this
root-level directory is outside the client debugfs hierarchy, PMBus core
cleanup does not remove it on device unbind, leaking the debugfs entries
and causing a use-after-free of the devm-allocated struct q54sj108a2_data
if the orphaned files are accessed via q54sj108a2_debugfs_read() or
q54sj108a2_debugfs_write() after device removal.
Fix the problem by adding the missing NULL pointer check. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Set nr_cores only after core_data allocation succeeds
In init_temp_data(), pdata->nr_cores is populated from
topology_num_cores_per_package() before allocating pdata->core_data. If
that allocation fails, init_temp_data() returns NULL with
pdata->core_data still NULL and pdata->nr_cores set to a positive value.
coretemp_add_core() logs the error without failing coretemp_cpu_online(),
so the CPU still comes online with pdata->hwmon_dev registered. When the
CPU is later taken offline (or the module is unloaded),
coretemp_cpu_offline() calls get_temp_data(pd, cpu), which loops up to
pdata->nr_cores and dereferences the NULL pdata->core_data pointer.
Store the core count in a local variable and assign pdata->nr_cores only
after pdata->core_data is allocated, preserving the invariant that
pdata->nr_cores is zero whenever pdata->core_data is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: zero misaligned I/O bounce pages
The misaligned I/O fallback copies the full bounce scatterlist to the
request buffer during completion. If a data-in command transfers less
than requested, part of a newly allocated bounce page can remain unwritten.
Allocate bounce pages with __GFP_ZERO so all bytes copied during completion
have a defined value. This path is already the slow fallback for
misaligned I/O, so the added initialization cost is acceptable.
Found during an LLM-assisted source audit and validated with a QEMU/KVM
vhost-scsi target using misaligned data-in commands. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix truncate racing with PMD zapping
zap_huge_pmd_folio() removes the rmap before calling folio_mark_dirty().
If this was the last mapping, truncation can skip unmapping the folio
and proceed without waiting for the PMD lock, racing with dirtying.
ifs_set_range_dirty() can oops if MADV_DONTNEED races with
ftruncate() on XFS, when we get the folio set dirty after it was found
to not be mapped anymore.
Move folio_mark_dirty() and folio_mark_accessed() before rmap removal,
matching the PTE zap path. This keeps the folio mapped while updating
its state, so truncation must wait for the page table lock.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify comment and description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix zapping migration entries for device-private THPs
A PMD migration entry can refer to a device-private folio.
zap_huge_pmd_folio() checks the folio type instead of the entry type,
so it treats such a migration entry as a device-private entry.
Installing the migration entry already removed the reverse mapping and
dropped the mapping reference. Zapping it must not repeat those
operations. Concurrent MADV_DONTNEED during migration back to system
memory can trigger this.
Check the PMD entry type using pmd_is_device_private_entry().
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: recheck the PUD under PTL in follow_pud_mask()
follow_pud_mask() reads the PUD without a lock. If it is a leaf, it takes
the lock and calls follow_huge_pud(), which reads the entry again, but
only tests whether it is present.
A leaf can be zapped concurrently and a page fault can fill the empty
entry with a page table.
This currently only applies when device-dax makes use of PUD entries,
and the fault after e.g., MADV_DONTNEED would find THPs to be disabled.
That requires a sequence like
1) Fault in the PUD
2) Disable THP
3) Have GUP race against concurrent MADV_DONTNEED + refault
Which is rather unlikely to happen in practice, which is why we never
received a report about such a problem.
Before commit 1b1676180246 ("mm/gup: handle huge pud for
follow_pud_mask()"), we performed that check in follow_devmap_pud() by
testing for pud_devmap().
Let's fix it by just structuring follow_pud_mask() similar to
follow_pmd_mask(), minus protnone stuff that does not apply and minus
FOLL_SPLIT_PMD handling. That makes it much easier to spot any such
inconsistencies.
Perform the pud_bad() check early in follow_pmd_mask() and just forward
the PUD value. We can drop the pud_present() check in follow_huge_pud(),
just like we have in follow_huge_pmd().
Even though we are performing more changes than strictly necessary, the
fix should be easy to backport. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: Validate the queue state under the queue lock in the address attribute
Reading the "address" sysfs attribute calls kernel_getsockname() on the
admin queue socket, which can race with the queue teardown during
connection error recovery: a reader can observe NVME_TCP_Q_LIVE set,
then block on the queue lock while nvme_tcp_free_queue() releases the
socket and clears queue->sock without holding the lock. Once the
reader acquires the lock it dereferences the NULL socket pointer.
Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during
error recovery") had the queue liveness check inside the lock.
Commit 782373ba2766 ("nvme: tcp: avoid race between queue_lock lock
and destroy") moved it back out because the lock itself is destroyed
in nvme_tcp_free_queue(), so a reader arriving late trips
mutex_destroy().
Check the queue liveness inside the queue lock, and clear queue->sock
under the same lock. The teardown clears NVME_TCP_Q_LIVE under the
lock well before the socket is released, so a reader either sees the
bit cleared or a socket that cannot be released while it holds the
lock. To also close the lock lifetime race, the queue locks are now
owned by the controller: they are initialized with the queue array and
only destroyed when the controller is freed, which cannot happen while
a sysfs attribute read is still in progress. The queue count is
computed by the NVME_TCP_OPT_NR_QUEUES() macro from the original
connect options for both initialization and destruction, as reconnects
may shrink ctrl->queue_count. |
| A security vulnerability has been detected in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This issue affects the function main of the file improved-diffusion/scripts/text_sample.py. Such manipulation of the argument out_dir leads to path traversal. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This vulnerability affects the function os.system of the file improved-diffusion/scripts/infill.py. This manipulation of the argument notes causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |