| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject tail calls directly from callback frames
A tail call from a non-zero frame is modeled as a return from that frame.
The verifier makes R0 unknown and calls prepare_func_exit() for the taken
branch.
When the current frame is a synchronous callback, prepare_func_exit()
enforces the callback return-value contract and marks R0 precise. Since the
tail-call path synthesized R0 rather than deriving it from an instruction,
precision backtracking reaches the callback-calling instruction with R0
still requested and triggers the "callback unexpected regs" verifier bug.
A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD.
Tail calls reachable from callbacks are already rejected later by
check_max_stack_depth(). Reject a tail call made directly by a callback
before constructing the inconsistent return state, using the existing
diagnostic. Tail calls from ordinary subprograms keep their current
behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref in btf_var_show()
btf_var_show() calls btf_type_id_resolve() unconditionally, which
dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the
vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is
not resolved during parsing. btf_modifier_show() guards this with
'if (btf->resolved_ids)', but btf_var_show() does not.
A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux
BTF to bpf_snprintf_btf() thus NULL-derefs:
KASAN: probably user-memory-access in range [0x46638-0x4663f]
RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929)
Call Trace:
<TASK>
btf_type_show (kernel/bpf/btf.c:8259)
btf_type_snprintf_show (kernel/bpf/btf.c:8329)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Resolve the var's type directly with btf_type_skip_modifiers() when
resolved_ids is NULL, mirroring btf_modifier_show(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject key-less BTF for hash maps
map_check_btf() allows a key-less BTF (btf_key_type_id == 0) only for
maps that have a ->map_check_btf callback, and leaves the actual
decision to that callback. Hash maps used to have no ->map_check_btf,
so a key-less BTF was rejected outright.
That changed when htab and rhtab gained a ->map_check_btf to register a
dtor - htab in commit 1df97a7453ee ("bpf: Register dtor for freeing
special fields") and rhtab in commit 6905f8601298 ("bpf: Allow special
fields in resizable hashtab"). Neither looks at the key, so a key-less
hash map now passes map_check_btf() and gets created. Reading it back
through bpffs feeds the key type_id 0 into btf_type_seq_show();
btf_type_by_id() returns the void type, kind_ops[BTF_KIND_UNKN] is NULL,
and btf_type_show() dereferences it:
RIP: 0010:btf_type_show+0x223/0x2e0 kernel/bpf/btf.c:8232
RSP: 0018:ffffc9000399f868 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000028
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc9000399f970 R11: 0000000000000001 R12: ffffffff9b96b140
R13: ffffc9000399f8e0 R14: ffff88803d393c00 R15: 0000000000000003
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000000 CR3: 000000003d213000 CR4: 0000000000352ef0
DR0: 0000000039ae8f55 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btf_type_seq_show_flags+0xca/0x120 kernel/bpf/btf.c:8250
htab_map_seq_show_elem+0x12e/0x350 kernel/bpf/hashtab.c:1669
map_seq_show+0x13d/0x1e0 kernel/bpf/inode.c:293
traverse.part.0.constprop.0+0x107/0x650 fs/seq_file.c:112
traverse fs/seq_file.c:99 [inline]
seq_read_iter+0x93f/0x1270 fs/seq_file.c:196
seq_read+0x344/0x4d0 fs/seq_file.c:163
vfs_read+0x1e4/0xb40 fs/read_write.c:572
ksys_pread64 fs/read_write.c:764 [inline]
__do_sys_pread64 fs/read_write.c:772 [inline]
__se_sys_pread64 fs/read_write.c:769 [inline]
__x64_sys_pread64+0x1eb/0x250 fs/read_write.c:769
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reject a key-less BTF in htab_map_check_btf() and rhtab_map_check_btf(),
restoring the previous behavior. |
| In PortSwigger Burp Suite DAST (formerly Burp Suite Enterprise Edition) before 2026.8, an authentication bypass can occur via an alternate path or channel. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: delimit inode_share cache key components
Previously, inode_share keys were encoded as follows:
fingerprint || domain_id
It would be better to have a separator between the fingerprint and domain
ID so that the fingerprint won't be parsed as part of a domain ID.
Change the key encoding as follows:
domain_id || '\0' || fingerprint
Since domain_id is a NUL-terminated string, this makes the in-memory key
indices unambiguous. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: clamp quantum in parse and fallback paths
ets_qdisc_change() falls back to psched_mtu() with no floor for bands
without an explicit quantum. With a crafted size table qdisc_pkt_len
reaches ~2 GiB, so a zero psched_mtu on a headerless device makes the
deficit-refill loop spin under the qdisc lock.
Move the floor into ets_quantum_parse() so explicitly configured quanta
are also clamped to [256, 1<<20], not just the fallback path.
Conditions to recreate the bug:
CONFIG_NET_SCH_ETS=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root ets bands 3 strict 2 quanta 1 1 |
| In the Linux kernel, the following vulnerability has been resolved:
eth: nfp: drop the replaced rule from the list when reprogramming fails
nfp_net_fs_add() replaces an existing rule by deleting it from the
hardware, decrementing nn->fs.count and programming the new one. If
nfp_net_fs_add_hw() fails the old entry stays on nn->fs.list - only the
success path reaches list_replace() - so the list is one longer than
nn->fs.count, and it advertises a rule whose hardware entry has already
been torn down.
nn->fs.count is what ETHTOOL_GRXCLSRLCNT reports, so userspace then sizes
its buffer one entry short of what the GRXCLSRLALL walk wants to write.
That used to overwrite one u32 past the allocation; since the walk is
bounded it is a permanent -EMSGSIZE instead, as nothing ever resyncs the
counter. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: zero extend the result of an arena 32-bit cmpxchg
bpf_convert_ctx_accesses() rewrites an atomic on an arena pointer from
BPF_STX | BPF_ATOMIC to BPF_STX | BPF_PROBE_ATOMIC, and it runs before
bpf_opt_subreg_zext_lo32_rnd_hi32().
That pass emits an explicit zero extension for a 32-bit cmpxchg even
when bpf_jit_needs_zext() is false. This is done because on some
architectures 32-bit cmpxchg requires explicit zero extension for the
dst register. E.g. on x86-64 'lock cmpxchg' does not change the %eax
if comparison is successful, while BPF semantics declare that each
operation on a 32-bit register zero extends it's upper half.
is_cmpxchg_insn() matches BPF_MODE == BPF_ATOMIC only, so an arena
cmpxchg misses said zero extension adjustment. This patch adjusts
is_cmpxchg_insn() to match BPF_PROBE_ATOMIC alongside BPF_ATOMIC. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
Sashiko reported that the code was using meta->nr_subbufs without making
sure that it matched the nr_pages + 1 on data that was assuming the two
were the same.
Add a check to the persistent ring buffer validation code to make sure
that the saved nr_subbufs matches what we expect. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate assoc response length before status and IE access
cfg80211_rx_assoc_resp() initialises the status and response-IE fields
of cfg80211_connect_resp_params from the management frame before
proving that the frame is long enough for those offsets. S1G and
regular association responses also have different IE offsets, but the
S1G path only patched resp_ie after the unsafe initialiser had already
run.
Defer resp_ie, resp_ie_len, and status to after the link-iteration
loop. Use a bool to remember whether the frame is S1G, then validate
the appropriate minimum length and set all three fields in a single
if/else block. Funnel short-frame and SME-reject cleanup through a
shared free_bss label for the abandon paths. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix double fput
Fix a double fput() in error handling in cachefiles_create_tmpfile(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref when showing a void BTF type
btf_modifier_show() resolves the modifier and then calls
btf_type_ops(t)->show() unconditionally. For the void type (type_id 0,
BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL.
A "const void" (a modifier resolving to void) cannot be a map key or
value - map_check_btf() rejects it because void has no size - so the map
dump path does not reach it. But bpf_snprintf_btf() takes a type_id
straight from the BPF program, and passing such a "const void" from the
vmlinux BTF NULL-derefs:
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
RIP: 0010:btf_modifier_show (kernel/bpf/btf.c:2914)
Call Trace:
<TASK>
btf_type_show (kernel/bpf/btf.c:8251)
btf_type_snprintf_show (kernel/bpf/btf.c:8321)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Fall back to btf_df_show() when the resolved type has no show op; it
emits the "<unsupported kind:N>" placeholder already used for kinds like
FWD and FUNC. bpf_snprintf_btf() then returns the length as usual. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject BPF_PSEUDO_FUNC reference to the main program
fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real
function addresses. This function is invoked from bpf_jit_subprogs()
only when env->subprog_cnt > 1. Meaning that for any program like
below:
int main(void *ctx) {
void *ptr = main;
...
bpf_timer_set_callback(..., ptr);
...
}
The 'ptr' won't be ever converted to contain an address.
In combination with e.g. bpf_timer_set_callback() this would lead to a
function call at a bogus address.
Instead of complicating the implementation, just assume that no useful
program needs main to be a sync or async callback and reject
BPF_PSEUDO_FUNC loads for the main subprogram. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/proc: Use file_ns_capable() when checking config space read access
proc_bus_pci_read() decides how much of the config space is readable based
on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling
read(), not the credentials of the process that opened the file.
The sysfs equivalent, pci_read_config(), has checked the credentials of the
opening process since commit de139a339395 ("pci: check caps from sysfs file
open to read device dependent config space"), so a privileged process can
open the config space file and pass the file descriptor to an unprivileged
process (for example, a process running a KVM guest with an assigned
device), which can then read the entire config space. The check was
subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci:
use security_capable() when checking capablities during config space read")
and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs:
use proper file capability helper function").
Thus, the two interfaces check the same capability against different
credentials. Checking the credentials of the task calling read() makes the
outcome depend on who reads rather than who opened, so the restriction is
bypassed whenever a more privileged process reads through the descriptor.
Checking the credentials recorded in file->f_cred settles the decision at
open() time and ties it to the file, where it cannot change with the
caller.
Use file_ns_capable() to check CAP_SYS_ADMIN against the credentials in
effect when the file was opened, bringing the procfs interface in line with
the sysfs behaviour.
As a result, a file descriptor opened by a privileged process and passed to
an unprivileged one now allows the entire config space to be read through
procfs, matching sysfs. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: validate handler object type in two places
ACPICA: validate handler object type in acpi_ev_has_default_handler()
and acpi_ev_find_region_handler(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: rkvdec: bound HEVC tile loops and PPS id to the array capacity
compute_tiles_uniform() and compute_tiles_non_uniform() loop over
num_tile_columns_minus1 + 1 / num_tile_rows_minus1 + 1 entries, and
assemble_hw_pps() writes one COLUMN_WIDTH / ROW_HEIGHT register per tile
and indexes priv_tbl->param_set[] by pic_parameter_set_id, all taken from
the untrusted PPS. Use the bounded v4l2_hevc_pps_num_tile_columns() /
v4l2_hevc_pps_num_tile_rows() helpers for the tile loops, and bail out of
assemble_hw_pps() before indexing priv_tbl->param_set[] with an
out-of-range pic_parameter_set_id, so the writes stay within the hardware
tables. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: i3c: serialize probe with bus removal
mctp_i3c_probe() drops busdevs_lock after finding the matching bus. A
concurrent I3C_NOTIFY_BUS_REMOVE can then unregister and free the bus
netdev before probe passes its private data to mctp_i3c_add_device().
The latter consequently adds a list node through a freed mbus pointer.
Keep busdevs_lock held until the device has been added. This also
satisfies the __must_hold annotation on mctp_i3c_add_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: mark a NULL call argument precise
check_func_arg() allows bpf_register_is_null() for nullable arguments
w/o marking the underlying scalar register precise. Hence a checkpoint
created on such a path would prune against arbitrary scalar value.
check_helper_call() enforces second parameter of the
bpf_get_local_storage() to be zero, w/o marking the underlying scalar
register precise. Hence a checkpoint created on such a path would
prune against arbitrary scalar value.
Grouping these two into one patch, as they share the same fixes tag. |
| OpenClaw versions before 2026.7.1 fail to properly authorize non-owner users executing MCP configuration changes through /mcp set and /mcp unset commands. Attackers can persist arbitrary stdio MCP commands that execute with OpenClaw process privileges when configuration loads, compromising host confidentiality, integrity, and availability. |
