| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wire provides gRPC and protocol buffers for Android, Kotlin, Swift, and Java. Prior to 6.3.0 and 7.0.0-alpha03, ByteArrayProtoReader32.skipGroup() and ProtoReader.skipGroup() in wire-runtime do not validate that a LENGTH_DELIMITED field length is non-negative before skip(), allowing a crafted protobuf varint encoding -128 as a signed Int to make skip(-128) move the internal position negative and make the next readByte() throw ArrayIndexOutOfBoundsException instead of the documented IOException or ProtocolException, which can crash services using ProtoAdapter.decode(byte[]) on untrusted payloads. This issue is fixed in versions 6.3.0 and 7.0.0-alpha03. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to send a specifically crafted message and downgrade the Transport Layer Security (TLS) protocol to a version disabled in the server configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix IRQ unsafe locking in gdom allocation
Lockdep complains:
[ 259.410489] =====================================================
[ 259.417287] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
[ 259.424667] 7.0.0-g51db1d8d2113 #54 Not tainted
[ 259.429718] -----------------------------------------------------
[ 259.436516] qemu-system-x86/10143 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 259.444670] ff3b2b1c60305170 (&xa->xa_lock#25){+.+.}-{3:3}, at: __domain_flush_pages+0x17c/0x4b0
[ 259.454485]
and this task is already holding:
[ 259.460991] ff3b2b1c98504cc0 (&domain->lock){-.-.}-{3:3}, at: amd_iommu_iotlb_sync+0x25/0x60
[ 259.470408] which would create a new lock dependency:
[ 259.476041] (&domain->lock){-.-.}-{3:3} -> (&xa->xa_lock#25){+.+.}-{3:3}
[ 259.483615]
but this new dependency connects a HARDIRQ-irq-safe lock:
[ 259.492447] (&domain->lock){-.-.}-{3:3}
[ 259.492449]
... which became HARDIRQ-irq-safe at:
[ 259.503705] lock_acquire+0xb6/0x2e0
[ 259.507790] _raw_spin_lock_irqsave+0x3e/0x60
[ 259.512748] amd_iommu_flush_iotlb_all+0x20/0x50
[ 259.517996] iommu_dma_free_iova.isra.0+0x1b8/0x1e0
[ 259.523534] __iommu_dma_unmap+0xc2/0x140
[ 259.528100] iommu_dma_unmap_phys+0x55/0xc0
[ 259.532863] dma_unmap_phys+0x274/0x2e0
[ 259.537238] dma_unmap_page_attrs+0x17/0x30
[ 259.542000] nvme_unmap_data+0x13e/0x280
[ 259.546473] nvme_pci_complete_batch+0x45/0x70
[ 259.551524] nvme_irq+0x83/0x90
[ 259.555123] __handle_irq_event_percpu+0x92/0x360
[ 259.560466] handle_irq_event+0x39/0x80
[ 259.564841] handle_edge_irq+0xb2/0x1a0
[ 259.569214] __common_interrupt+0x4e/0x130
[ 259.573882] common_interrupt+0x88/0xa0
[ 259.578256] asm_common_interrupt+0x27/0x40
[ 259.583019] cpuidle_enter_state+0x119/0x5d0
[ 259.587877] cpuidle_enter+0x2e/0x50
[ 259.591962] do_idle+0x153/0x2c0
[ 259.595657] cpu_startup_entry+0x29/0x30
[ 259.600128] start_secondary+0x118/0x150
[ 259.604601] common_startup_64+0x13e/0x141
[ 259.609266]
to a HARDIRQ-irq-unsafe lock:
[ 259.615384] (&xa->xa_lock#25){+.+.}-{3:3}
[ 259.615386]
... which became HARDIRQ-irq-unsafe at:
[ 259.627039] ...
[ 259.627039] lock_acquire+0xb6/0x2e0
[ 259.633071] _raw_spin_lock+0x2f/0x50
[ 259.637250] amd_iommu_alloc_domain_nested+0x140/0x3c0
[ 259.643078] iommufd_hwpt_alloc+0x272/0x800 [iommufd]
[ 259.648813] iommufd_fops_ioctl+0x14e/0x200 [iommufd]
[ 259.654547] __x64_sys_ioctl+0x9d/0xf0
...
Since amd_iommu_domain_flush_pages() necessarily holds domain->lock to do the
flush, switch the allocation side in gdom_info_load_or_alloc_locked() to
HARDIRQ-safe allocation. The IOMMU_DESTROY->free path has the same issue,
so switch that path to HARDIRQ-safe locking as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read
When the firmware sends a command response with a length mismatch,
carl9170_cmd_callback() logs the mismatch and calls carl9170_restart()
but then falls through to memcpy(ar->readbuf, buffer + 4, len - 4).
Since len comes from the firmware and can exceed ar->readlen, this
copies more data than the readbuf was allocated for.
Bound the memcpy to min(len - 4, ar->readlen) so that the response
is still completed -- avoiding repeated restarts from queued garbage --
while preventing an overread past the response buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: pretimeout: Fix UAF in watchdog_unregister_governor()
When a watchdog governor is unregistered, it updates existing watchdog
devices that were using this governor by falling back to `default_gov`.
If the governor being unregistered is currently set as `default_gov`,
the `default_gov` is never cleared. This leads to 2 use-after-free
issues:
1. New watchdog devices registered after this point will inherit the
dangling `default_gov`.
2. Existing watchdog devices using the unregistered governor will have
their `wdd->gov` reassigned to the dangling `default_gov`.
Fix the UAF by clearing `default_gov` if it matches the governor being
unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nzxt-kraken3) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop(). |
| Prowler is a cloud security platform. Prior to 5.36.0, the Kubernetes provider connection test accepted kubeconfig_content containing a legacy gcp auth-provider with config.cmd-path and config.cmd-args because kubeconfig_contains_exec_auth in api/src/backend/api/v1/serializers.py checked only exec blocks, and POST /api/v1/providers/{id}/connection loaded it through config.load_kube_config_from_dict in prowler/providers/kubernetes/kubernetes_provider.py, causing kubernetes-python CommandTokenSource.token to run the attacker-supplied command through subprocess.Popen on the shared worker. This issue is fixed in version 5.36.0. |
| Prowler is a cloud security platform. Prior to 5.33.1, an authenticated user with Lighthouse provider configuration access could supply an unvalidated base_url for the openai_compatible provider through POST /api/v1/lighthouse/providers and POST /api/v1/lighthouse/providers/{id}/connection, causing api/src/backend/tasks/jobs/lighthouse_providers.py to send outbound requests, including the API key in the Authorization header, to attacker-controlled or internal endpoints when client.models.list was called. This issue is fixed in version 5.33.1. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.12, an anonymous ListObjectVersions request in rustfs/src/storage/access.rs that lacks a direct bucket-policy grant falls back to an s3:ListBucket check and returns before the policy_allowed path applies deny_anonymous_table_data_plane_if_needed and RestrictPublicBuckets, so a bucket that permits anonymous listing can continue exposing version listings after an operator enables the public-access control. The bypass affects GET /<bucket>?versions= and can disclose object version metadata even though equivalent GetObject requests are denied. This issue is fixed in version 1.0.0-beta.12. |
| IBM i 7.6, and 7.5 could allow a remote authenticated attacker to execute arbitrary commands with elevated privileges due to improper neutralization of special elements used in an OS command. |
| SurrealDB before 2.1.4 silently fails to overwrite table definitions when the DEFINE TABLE ... OVERWRITE clause is used on tables defined with TYPE RELATION. Because table definitions include the PERMISSIONS clause, an attempt to tighten a table's permissions via OVERWRITE does not take effect, and the administrator may incorrectly believe the change was applied. As a result, a client authorized to run queries may continue to access data in that table that the updated (but unapplied) permissions were intended to restrict. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to manipulate the lifetimes of synchronisation objects in the kernel, leading to read/write UAFs.
During workload submission involving a fence exported by the GPU driver, the reference count of the underlying synchronisation primitive is not properly incremented. This can be exploited, by destroying the exported fence and prematurely release the underlying primitive, resulting in a potential use-after-free condition. |
| Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory.
Software installed and run under a Guest VM can send commands to the GPU which result in out of bounds memory accesses. These can be used to escalate privileges. |
| Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory.
Out of bounds accesses triggered by malware introduced to a Guest KMD could allow privilege escalation which escapes virtualization boundaries. |
| An integer overflow when calculating physical offsets for sparse PMRs may result in 32-bit truncation of address computations for PMRs larger than 4 GB. This can lead to incorrect GPU MMU mappings and may allow a non-privileged user to trigger access to unintended physical memory, resulting in memory corruption or information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths
In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and
cifs_close_deferred_file_under_dentry(), when a pending deferred close
is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to
add the file to the local processing list may fail under memory pressure.
The loop breaks immediately, but the cancelled work is no longer pending
(it would have called _cifsFileInfo_put()), and the cfile is never added
to file_head for processing. The cifsFileInfo reference and the open
server handle both leak.
Fix by saving the cfile that failed allocation in a local variable,
breaking as before, and calling _cifsFileInfo_put() on it after
releasing the lock. Any files later in the iteration are unaffected
since their deferred work is still pending and will fire normally. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix auxiliary device add/del races
Two paths add or delete the same slot (pf->vfs[vf_id].padev): a VF's
pdsc_reset_done() and the PF's devlink enable_vnet/disable_vnet handler.
They serialize on config_lock, but neither guards the slot under it
correctly.
add() registers and stores a new auxiliary device without first checking
the slot, so a second add of an already-populated slot leaks the first
device. del() makes that check outside config_lock, so two concurrent
dels can both pass it; the first clears the slot, and the second
dereferences a NULL pointer.
Check and update the slot under config_lock in both paths. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix use-after-free on workqueue during remove
In pdsc_remove(), the workqueue is destroyed before pdsc_teardown()
is called. This ordering allows two paths to queue work on the
destroyed workqueue:
1. If pdsc_teardown() -> pdsc_devcmd_reset() times out, the error
path in pdsc_devcmd_locked() queues health_work.
2. A NotifyQ event can trigger the ISR and queue work before free_irq()
is called in pdsc_teardown().
Fix by moving destroy_workqueue() after pdsc_teardown() so the
workqueue outlives every queuer; destroy_workqueue() then flushes any
work still pending.
Draining the queued work also requires ordering the teardown so the
resources that work touches are freed last:
- In pdsc_qcq_free(), after freeing the interrupt, cancel_work_sync()
the queue's work and only then clear qcq->intx, so
pdsc_process_adminq()'s read of qcq->intx for interrupt-credit
return cannot race with the clear.
- Free adminqcq before notifyqcq: the shared adminq ISR is released
when adminqcq is freed, and the adminq work accesses notifyqcq, so
both must be stopped before notifyqcq is freed. |
| A repository publisher without delete permission may modify protected package content under specific conditions. |
| A party with write access to stored session data may affect JFrog Artifactory under specific conditions. |
