| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: fix TX fifo corruption
Sometimes, when a packet is received on channel A at almost the same time
as a packet is about to be transmitted on channel B, we observe with a
logic analyzer that the received packet on channel A is transmitted on
channel B. In other words, the Tx buffer data on channel B is corrupted
with data from channel A.
The problem appeared since commit 4409df5866b7 ("serial: sc16is7xx: change
EFR lock to operate on each channels"), which changed the EFR locking to
operate on each channel instead of chip-wise.
This commit has introduced a regression, because the EFR lock is used not
only to protect the EFR registers access, but also, in a very obscure and
undocumented way, to protect access to the data buffer, which is shared by
the Tx and Rx handlers, but also by each channel of the IC.
Fix this regression first by switching to kfifo_out_linear_ptr() in
sc16is7xx_handle_tx() to eliminate the need for a shared Rx/Tx buffer.
Secondly, replace the chip-wise Rx buffer with a separate Rx buffer for
each channel. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on F2FS_INLINE_DATA flag in inode during GC
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inline.c:258!
CPU: 1 PID: 34 Comm: kworker/u8:2 Not tainted 6.9.0-rc6-syzkaller-00012-g9e4bc4bcae01 #0
RIP: 0010:f2fs_write_inline_data+0x781/0x790 fs/f2fs/inline.c:258
Call Trace:
f2fs_write_single_data_page+0xb65/0x1d60 fs/f2fs/data.c:2834
f2fs_write_cache_pages fs/f2fs/data.c:3133 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3288 [inline]
f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3315
do_writepages+0x35b/0x870 mm/page-writeback.c:2612
__writeback_single_inode+0x165/0x10b0 fs/fs-writeback.c:1650
writeback_sb_inodes+0x905/0x1260 fs/fs-writeback.c:1941
wb_writeback+0x457/0xce0 fs/fs-writeback.c:2117
wb_do_writeback fs/fs-writeback.c:2264 [inline]
wb_workfn+0x410/0x1090 fs/fs-writeback.c:2304
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa12/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f2/0x390 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
The root cause is: inline_data inode can be fuzzed, so that there may
be valid blkaddr in its direct node, once f2fs triggers background GC
to migrate the block, it will hit f2fs_bug_on() during dirty page
writeback.
Let's add sanity check on F2FS_INLINE_DATA flag in inode during GC,
so that, it can forbid migrating inline_data inode's data block for
fixing. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to cover read extent cache access with lock
syzbot reports a f2fs bug as below:
BUG: KASAN: slab-use-after-free in sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46
Read of size 4 at addr ffff8880739ab220 by task syz-executor200/5097
CPU: 0 PID: 5097 Comm: syz-executor200 Not tainted 6.9.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
sanity_check_extent_cache+0x370/0x410 fs/f2fs/extent_cache.c:46
do_read_inode fs/f2fs/inode.c:509 [inline]
f2fs_iget+0x33e1/0x46e0 fs/f2fs/inode.c:560
f2fs_nfs_get_inode+0x74/0x100 fs/f2fs/super.c:3237
generic_fh_to_dentry+0x9f/0xf0 fs/libfs.c:1413
exportfs_decode_fh_raw+0x152/0x5f0 fs/exportfs/expfs.c:444
exportfs_decode_fh+0x3c/0x80 fs/exportfs/expfs.c:584
do_handle_to_path fs/fhandle.c:155 [inline]
handle_to_path fs/fhandle.c:210 [inline]
do_handle_open+0x495/0x650 fs/fhandle.c:226
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
We missed to cover sanity_check_extent_cache() w/ extent cache lock,
so, below race case may happen, result in use after free issue.
- f2fs_iget
- do_read_inode
- f2fs_init_read_extent_tree
: add largest extent entry in to cache
- shrink
- f2fs_shrink_read_extent_tree
- __shrink_extent_tree
- __detach_extent_node
: drop largest extent entry
- sanity_check_extent_cache
: access et->largest w/o lock
let's refactor sanity_check_extent_cache() to avoid extent cache access
and call it before f2fs_init_read_extent_tree() to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: apple: fix device reference counting
Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl.
Split the allocation side out to make the error handling boundary easier
to navigate. The apple driver had been doing this wrong, leaking the
controller device memory on a tagset failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix null pointer deref in dcn20_resource.c
Fixes a hang thats triggered when MPV is run on a DCN401 dGPU:
mpv --hwdec=vaapi --vo=gpu --hwdec-codecs=all
and then enabling fullscreen playback (double click on the video)
The following calltrace will be seen:
[ 181.843989] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 181.843997] #PF: supervisor instruction fetch in kernel mode
[ 181.844003] #PF: error_code(0x0010) - not-present page
[ 181.844009] PGD 0 P4D 0
[ 181.844020] Oops: 0010 [#1] PREEMPT SMP NOPTI
[ 181.844028] CPU: 6 PID: 1892 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu
[ 181.844038] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018
[ 181.844044] RIP: 0010:0x0
[ 181.844079] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 181.844084] RSP: 0018:ffffb593c2b8f7b0 EFLAGS: 00010246
[ 181.844093] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004
[ 181.844099] RDX: ffffb593c2b8f804 RSI: ffffb593c2b8f7e0 RDI: ffff9e3c8e758400
[ 181.844105] RBP: ffffb593c2b8f7b8 R08: ffffb593c2b8f9c8 R09: ffffb593c2b8f96c
[ 181.844110] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb593c2b8f9c8
[ 181.844115] R13: 0000000000000001 R14: ffff9e3c88000000 R15: 0000000000000005
[ 181.844121] FS: 00007c6e323bb5c0(0000) GS:ffff9e3f85f80000(0000) knlGS:0000000000000000
[ 181.844128] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 181.844134] CR2: ffffffffffffffd6 CR3: 0000000140fbe000 CR4: 00000000003506e0
[ 181.844141] Call Trace:
[ 181.844146] <TASK>
[ 181.844153] ? show_regs+0x6d/0x80
[ 181.844167] ? __die+0x24/0x80
[ 181.844179] ? page_fault_oops+0x99/0x1b0
[ 181.844192] ? do_user_addr_fault+0x31d/0x6b0
[ 181.844204] ? exc_page_fault+0x83/0x1b0
[ 181.844216] ? asm_exc_page_fault+0x27/0x30
[ 181.844237] dcn20_get_dcc_compression_cap+0x23/0x30 [amdgpu]
[ 181.845115] amdgpu_dm_plane_validate_dcc.constprop.0+0xe5/0x180 [amdgpu]
[ 181.845985] amdgpu_dm_plane_fill_plane_buffer_attributes+0x300/0x580 [amdgpu]
[ 181.846848] fill_dc_plane_info_and_addr+0x258/0x350 [amdgpu]
[ 181.847734] fill_dc_plane_attributes+0x162/0x350 [amdgpu]
[ 181.848748] dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu]
[ 181.849791] ? dm_update_plane_state.constprop.0+0x4e3/0x6b0 [amdgpu]
[ 181.850840] amdgpu_dm_atomic_check+0xdfe/0x1760 [amdgpu] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix soft lockup under heavy CEQE load
CEQEs are handled in interrupt handler currently. This may cause the
CPU core staying in interrupt context too long and lead to soft lockup
under heavy load.
Handle CEQEs in BH workqueue and set an upper limit for the number of
CEQE handled by a single call of work handler. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: icc-bwmon: Fix refcount imbalance seen during bwmon_remove
The following warning is seen during bwmon_remove due to refcount
imbalance, fix this by releasing the OPPs after use.
Logs:
WARNING: at drivers/opp/core.c:1640 _opp_table_kref_release+0x150/0x158
Hardware name: Qualcomm Technologies, Inc. X1E80100 CRD (DT)
...
Call trace:
_opp_table_kref_release+0x150/0x158
dev_pm_opp_remove_table+0x100/0x1b4
devm_pm_opp_of_table_release+0x10/0x1c
devm_action_release+0x14/0x20
devres_release_all+0xa4/0x104
device_unbind_cleanup+0x18/0x60
device_release_driver_internal+0x1ec/0x228
driver_detach+0x50/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
bwmon_driver_exit+0x18/0x524 [icc_bwmon]
__arm64_sys_delete_module+0x184/0x264
invoke_syscall+0x48/0x118
el0_svc_common.constprop.0+0xc8/0xe8
do_el0_svc+0x20/0x2c
el0_svc+0x34/0xdc
el0t_64_sync_handler+0x13c/0x158
el0t_64_sync+0x190/0x194
--[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-test: Make use of cached 'epc_features' in pci_epf_test_core_init()
Instead of getting the epc_features from pci_epc_get_features() API, use
the cached pci_epf_test::epc_features value to avoid the NULL check. Since
the NULL check is already performed in pci_epf_test_bind(), having one more
check in pci_epf_test_core_init() is redundant and it is not possible to
hit the NULL pointer dereference.
Also with commit a01e7214bef9 ("PCI: endpoint: Remove "core_init_notifier"
flag"), 'epc_features' got dereferenced without the NULL check, leading to
the following false positive Smatch warning:
drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747)
Thus, remove the redundant NULL check and also use the epc_features::
{msix_capable/msi_capable} flags directly to avoid local variables.
[kwilczynski: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
kvm: s390: Reject memory region operations for ucontrol VMs
This change rejects the KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 ioctls when called on a ucontrol VM.
This is necessary since ucontrol VMs have kvm->arch.gmap set to 0 and
would thus result in a null pointer dereference further in.
Memory management needs to be performed in userspace and using the
ioctls KVM_S390_UCAS_MAP and KVM_S390_UCAS_UNMAP.
Also improve s390 specific documentation for KVM_SET_USER_MEMORY_REGION
and KVM_SET_USER_MEMORY_REGION2.
[frankja@linux.ibm.com: commit message spelling fix, subject prefix fix] |
| In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
While transmitting with rx_len == 0, the RX FIFO is not going to be
emptied in the interrupt handler. A subsequent transfer could then
read crap from the previous transfer out of the RX FIFO into the
start RX buffer. The core provides a register that will empty the RX and
TX FIFOs, so do that before each transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray
Patch series "mm/filemap: Limit page cache size to that supported by
xarray", v2.
Currently, xarray can't support arbitrary page cache size. More details
can be found from the WARN_ON() statement in xas_split_alloc(). In our
test whose code is attached below, we hit the WARN_ON() on ARM64 system
where the base page size is 64KB and huge page size is 512MB. The issue
was reported long time ago and some discussions on it can be found here
[1].
[1] https://www.spinics.net/lists/linux-xfs/msg75404.html
In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one
supported by xarray and avoid PMD-sized page cache if needed. The code
changes are suggested by David Hildenbrand.
PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray
PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path
PATCH[4] avoids PMD-sized page cache for shmem files if needed
Test program
============
# cat test.c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <sys/syscall.h>
#include <sys/mman.h>
#define TEST_XFS_FILENAME "/tmp/data"
#define TEST_SHMEM_FILENAME "/dev/shm/data"
#define TEST_MEM_SIZE 0x20000000
int main(int argc, char **argv)
{
const char *filename;
int fd = 0;
void *buf = (void *)-1, *p;
int pgsize = getpagesize();
int ret;
if (pgsize != 0x10000) {
fprintf(stderr, "64KB base page size is required\n");
return -EPERM;
}
system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled");
system("rm -fr /tmp/data");
system("rm -fr /dev/shm/data");
system("echo 1 > /proc/sys/vm/drop_caches");
/* Open xfs or shmem file */
filename = TEST_XFS_FILENAME;
if (argc > 1 && !strcmp(argv[1], "shmem"))
filename = TEST_SHMEM_FILENAME;
fd = open(filename, O_CREAT | O_RDWR | O_TRUNC);
if (fd < 0) {
fprintf(stderr, "Unable to open <%s>\n", filename);
return -EIO;
}
/* Extend file size */
ret = ftruncate(fd, TEST_MEM_SIZE);
if (ret) {
fprintf(stderr, "Error %d to ftruncate()\n", ret);
goto cleanup;
}
/* Create VMA */
buf = mmap(NULL, TEST_MEM_SIZE,
PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (buf == (void *)-1) {
fprintf(stderr, "Unable to mmap <%s>\n", filename);
goto cleanup;
}
fprintf(stdout, "mapped buffer at 0x%p\n", buf);
ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE);
if (ret) {
fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n");
goto cleanup;
}
/* Populate VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE);
if (ret) {
fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret);
goto cleanup;
}
/* Punch the file to enforce xarray split */
ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
TEST_MEM_SIZE - pgsize, pgsize);
if (ret)
fprintf(stderr, "Error %d to fallocate()\n", ret);
cleanup:
if (buf != (void *)-1)
munmap(buf, TEST_MEM_SIZE);
if (fd > 0)
close(fd);
return 0;
}
# gcc test.c -o test
# cat /proc/1/smaps | grep KernelPageSize | head -n 1
KernelPageSize: 64 kB
# ./test shmem
:
------------[ cut here ]------------
WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \
ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \
drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \
virtio_net sha1_ce net_failover failover virtio_console virtio_blk \
dimlib virtio_mmio
CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
pstate: 83400005 (Nzcv daif +PAN -UAO +TC
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: disable PMD-sized page cache if needed
For shmem files, it's possible that PMD-sized page cache can't be
supported by xarray. For example, 512MB page cache on ARM64 when the base
page size is 64KB can't be supported by xarray. It leads to errors as the
following messages indicate when this sort of xarray entry is split.
WARNING: CPU: 34 PID: 7578 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 \
nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject \
nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \
ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse xfs \
libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_net \
net_failover virtio_console virtio_blk failover dimlib virtio_mmio
CPU: 34 PID: 7578 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : xas_split_alloc+0xf8/0x128
lr : split_huge_page_to_list_to_order+0x1c4/0x720
sp : ffff8000882af5f0
x29: ffff8000882af5f0 x28: ffff8000882af650 x27: ffff8000882af768
x26: 0000000000000cc0 x25: 000000000000000d x24: ffff00010625b858
x23: ffff8000882af650 x22: ffffffdfc0900000 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffdfc0900000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000018000000000 x15: 52f8004000000000
x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020
x11: 52f8000000000000 x10: 52f8e1c0ffff6000 x9 : ffffbeb9619a681c
x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00010b02ddb0
x5 : ffffbeb96395e378 x4 : 0000000000000000 x3 : 0000000000000cc0
x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000
Call trace:
xas_split_alloc+0xf8/0x128
split_huge_page_to_list_to_order+0x1c4/0x720
truncate_inode_partial_folio+0xdc/0x160
shmem_undo_range+0x2bc/0x6a8
shmem_fallocate+0x134/0x430
vfs_fallocate+0x124/0x2e8
ksys_fallocate+0x4c/0xa0
__arm64_sys_fallocate+0x24/0x38
invoke_syscall.constprop.0+0x7c/0xd8
do_el0_svc+0xb4/0xd0
el0_svc+0x44/0x1d8
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Fix it by disabling PMD-sized page cache when HPAGE_PMD_ORDER is larger
than MAX_PAGECACHE_ORDER. As Matthew Wilcox pointed, the page cache in a
shmem file isn't represented by a multi-index entry and doesn't have this
limitation when the xarry entry is split until commit 6b24ca4a1a8d ("mm:
Use multi-index entries in the page cache"). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fail bpf_timer_cancel when callback is being cancelled
Given a schedule:
timer1 cb timer2 cb
bpf_timer_cancel(timer2); bpf_timer_cancel(timer1);
Both bpf_timer_cancel calls would wait for the other callback to finish
executing, introducing a lockup.
Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps
track of all in-flight cancellation requests for a given BPF timer.
Whenever cancelling a BPF timer, we must check if we have outstanding
cancellation requests, and if so, we must fail the operation with an
error (-EDEADLK) since cancellation is synchronous and waits for the
callback to finish executing. This implies that we can enter a deadlock
situation involving two or more timer callbacks executing in parallel
and attempting to cancel one another.
Note that we avoid incrementing the cancelling counter for the target
timer (the one being cancelled) if bpf_timer_cancel is not invoked from
a callback, to avoid spurious errors. The whole point of detecting
cur->cancelling and returning -EDEADLK is to not enter a busy wait loop
(which may or may not lead to a lockup). This does not apply in case the
caller is in a non-callback context, the other side can continue to
cancel as it sees fit without running into errors.
Background on prior attempts:
Earlier versions of this patch used a bool 'cancelling' bit and used the
following pattern under timer->lock to publish cancellation status.
lock(t->lock);
t->cancelling = true;
mb();
if (cur->cancelling)
return -EDEADLK;
unlock(t->lock);
hrtimer_cancel(t->timer);
t->cancelling = false;
The store outside the critical section could overwrite a parallel
requests t->cancelling assignment to true, to ensure the parallely
executing callback observes its cancellation status.
It would be necessary to clear this cancelling bit once hrtimer_cancel
is done, but lack of serialization introduced races. Another option was
explored where bpf_timer_start would clear the bit when (re)starting the
timer under timer->lock. This would ensure serialized access to the
cancelling bit, but may allow it to be cleared before in-flight
hrtimer_cancel has finished executing, such that lockups can occur
again.
Thus, we choose an atomic counter to keep track of all outstanding
cancellation requests and use it to prevent lockups in case callbacks
attempt to cancel each other while executing in parallel. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Use kfree_sensitive() to fix Coccinelle warnings
Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle:
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1506)
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1643)
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1770) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Wipe copies of clear-key structures on failure
Wipe all sensitive data from stack for all IOCTLs, which convert a
clear-key into a protected- or secure-key. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Wipe copies of protected- and secure-keys
Although the clear-key of neither protected- nor secure-keys is
accessible, this key material should only be visible to the calling
process. So wipe all copies of protected- or secure-keys from stack,
even in case of an error. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix improper extts handling
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: an30259a: Use devm_mutex_init() for mutex initialization
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses mutex which was destroyed already
in module's remove() so use devm API instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix double free err_addr pointer warnings
In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages
will be run many times so that double free err_addr in some special case.
So set the err_addr to NULL to avoid the warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Don't process extts if PTP is disabled
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready. |
