| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the four non-secure-callable secure stack functions of the TrustZone-M ports dereference a thread pointer supplied by the non-secure world without checking that it points to non-secure memory. Non-secure code can make the secure firmware reveal which secure bytes are zero, write chosen secure words, and fault the secure world, breaking TrustZone-M isolation and enabling recovery of secure-world secrets such as cryptographic keys. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Report Distribution). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 8.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:H). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 6.9 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:R/S:C/C:N/I:H/A:H). |
| An issue in the GraphQL endpoint of traggo server v0.8.3 allows attackers to cause a Denial of Service (DoS) via a crafted POST request to the GraphQL endpoint |
| In onCreate of SettingsApplication.java, there is a possible cross-profile consent dialog label injection due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't hide a link from cancellations
A task that exits cancels its tracked requests and waits until they are
gone. io_uring_cancel_generic() looks everywhere a request can be, and
goes to sleep if it found nothing to cancel. It is woken up each time
one of the requests of the task is completed by task work or freed.
When io-wq is done with a request that has a link, there is a time in which
the next request of the link can't be found:
io_worker_handle_work()
io_assign_current_work(worker, NULL)
io_wq_free_work(work)
io_req_find_next() // takes the link off the request
io_free_req() // task work for the task
io_assign_current_work(worker, linked)
io_run_task_work()
cond_resched()
worker->cur_work = linked
It is not pending, it is not the current work of a worker, and it is not
yet on the list that it is about to be parked on. If the pass that the
exiting task makes because of io_free_req() falls into that time, it finds
nothing and the task goes to sleep. The worker then runs the link, which
IO_WQ_BIT_EXIT doesn't prevent for bounded work. If that parks the request
nothing is completed or freed, and nobody wakes up the task. If it is the
process that exits it can't be killed any more either.
NOP, IOSQE_ASYNC | IOSQE_IO_LINK
FUTEX_WAIT, FUTEX2_PRIVATE
exit of the thread, or of the process, up to 63us later
With four of these per round 5 to 8 of 10,000 rounds hang (4 CPUs, KVM):
io_uring_cancel_generic
do_exit
Commit f8b632e89a10 ("io_uring: tighten task exit cancellations") is about
the same gap, and makes the task look again for whatever happens before
io_free_req().
Free the request once the link is the current work of the worker, or
pending. Whoever is woken up by that can find the link, until it is parked
where cancellations look as well. To do so split io_wq_free_work() in two. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: don't flood a cancelling task with task_work
io_ring_exit_work() asks each task which has used the ring to remove its
tctx node, by task_work, and repeats that until the list is empty.
io_tctx_exit_cb() doesn't touch the node while the task is in
io_uring_cancel_generic(), which removes all the nodes at its end. So the
work item queues the callback again as soon as it has completed, for
nothing.
That is more than a waste of time. task_work_run() only returns when it
finds the list empty. If the rings are released from inside the
cancellation, because requests of other rings held the last references to
their files, up to 64 work items keep sending callbacks to the one task
which is running them. It never finds the list empty, never gets back to
the cancellation, the nodes stay, and so it goes on: a task with 60 pairs
of rings which poll each other ran 280000 callbacks in 5 seconds, 20
seconds after exit_group(). It ends when all the senders happen to be late
at the same time. Until then the task keeps a CPU and the work items busy.
An exiting task can't be killed meanwhile. execve() cancels the requests in
the same way, so a live task can get stuck there as well, for minutes. If
it takes more than five, the work items run into the
WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No
privilege is needed for any of this.
If the callback has met a task in cancellation, wait a little before it is
sent again. Nobody has to wake the work item up for that: either the node
is gone by then, or it is the turn of the next round. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cancel: rearm local work wake up before sleep
io_uring_try_cancel_requests() sets ->cq_wait_nr to 1 so that the next
io_req_local_work_add() wakes the cancelling task. The add that takes the
count to zero is the only one that wakes, later ones see a count <= 0 and
return. io_uring_cancel_generic() however only becomes
TASK_INTERRUPTIBLE much later, so the one wake up can be spent on a
running task. That is fine as long as the entry of that add is still
queued, as the io_local_work_pending() check then skips the sleep. It is
not if the add was delayed after queueing its entry:
CPU0 (submitter in exec or exit) CPU1 (io_req_local_work_add)
mpscq_push(req A)
io_uring_try_cancel_requests()
io_run_local_work() // runs req A
io_uring_try_cancel_requests()
atomic_set(&ctx->cq_wait_nr, 1)
atomic_read(&ctx->cq_wait_nr) == 1
count taken, wake_up_state()
// task is running, no-op
prepare_to_wait(TASK_INTERRUPTIBLE)
io_local_work_pending() == false
schedule()
mpscq_push(req B)
cq_wait_nr <= 0, return
Only the sleeping task can run req B, so it is stuck in execve() until a
signal happens to wake it. An exiting task doesn't even get that.
Arm the count again once the task state is set and before the work list
is checked, for the rings whose local work this task is the one to run. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: Fix key_reject_and_link() race with keyring restriction
The restrict_link check in key_reject_and_link() is done before taking
the keyring semaphore, racing with a concurrent keyring_restrict()
that installs the restriction while holding the semaphore in write
mode.
Move the check to after __key_link_lock(), so it is done under the
semaphore, matching the pattern used in __key_create_or_update(). |
| In the Linux kernel, the following vulnerability has been resolved:
pid_namespace: prevent TIF_NOTIFY_SIGNAL from interrupting the reaper
Since commit 7fea700e04bd ("zap_pid_ns_processes: clear
TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") zap_pid_ns_processes()
clears TIF_NOTIFY_SIGNAL before every kernel_wait4() call. Otherwise
kernel_wait4() doesn't sleep and returns -ERESTARTSYS if
signal_pending() is true and the reaper busy-waits.
But clearing TIF_NOTIFY_SIGNAL doesn't fix it. It can get raised again.
For example, klp_send_signals() sets it raw against any task that hasn't
transitioned yet. And it keeps sending it until the livepatch finishes.
The sleep loop waiting for pid_allocated to drop has the same problem
and it doesn't even clear anything. So a schedule() in
TASK_INTERRUPTIBLE returns immediately.
Use a no_notify_signal guard. signal_pending() will ignore
TIF_NOTIFY_SIGNAL and the pid namespace reaper sleeps until a child
exits or free_pid() wakes it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn
l2cap_chan may be linked to l2cap_conn at most once. This is assumed in
several places, eg l2cap_chan_del cleanup.
There is a TOCTOU race where the invariant is violated:
[Task 1] [Task 2]
l2cap_chan_connect l2cap_sock_bind
l2cap_chan_lock lock_sock
l2cap_state_change if (sk->sk_state != BT_OPEN)
chan->state = BT_CONNECT
l2cap_sock_state_change_cb chan->state = BT_BOUND
sk->sk_state = BT_BOUND
lock_sock <------------------ release_sock
sk->sk_state = BT_CONNECT
l2cap_sock_connect() does not check sk->sk_state, so since chan->state
is now BT_BOUND, subsequent connect() ends up with second
__l2cap_chan_add.
Explicitly document and check the invariant in __l2cap_chan_add with
WARN_ON_ONCE. The only callsite where it could be hit is
l2cap_chan_connect, so add pre-check there to avoid relying on
chan->state. chan->state read/write is not properly guarded currently so
there can be other TOCTOUC problems.
Add l2cap_lock_chan in l2cap_sock_bind() to guard chan->state write. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Hold trace_types_lock when updating modules in persistent instances
trace_module_record() walks ftrace_trace_arrays from the module notifier
without trace_types_lock. A concurrent rmdir of an instance removes it
from the list and frees it under that lock, so a module load or unload
can walk into a freed trace_array. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Hold trace_types_lock when resetting last boot data from readers
update_last_data_if_empty() is called from tracing_open() with O_TRUNC,
tracing_read_pipe() and tracing_buffers_read() without trace_types_lock.
Two readers can both pass the LAST_BOOT test and free module_delta
twice, and a module notifier can update module_delta while it is being
freed.
Take trace_types_lock in those paths and keep the callers that already
hold it on an unlocked variant. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Reject incomplete event filter expressions
A non-empty expression normally finishes in predicate_parse()'s inner
loop, which resolves the pending logical operators before jumping to
finalization. If the input ends after an operator, possibly followed by
unary '!' tokens, the outer loop instead falls through with unresolved
operator state.
For example, "common_pid == 1 || common_pid == 2 &&" leaves
prog[0].target equal to -1. The second pass then reads prog[-1] before
the forward-jump check can reject it. Depending on adjacent slab
contents, it can also copy an out-of-bounds word into a branch target
that passes the forward-only check. A self-targeted perf tracepoint
counting event can reach this path through PERF_EVENT_IOC_SET_FILTER.
Reject the outer-loop fallthrough when a predicate has already been
parsed. This ensures that non-empty expressions only reach finalization
after the inner loop has resolved their operators. Keep the existing
no-filter error for input that has no predicates. Add a regression test
for trailing logical operators and unary negations. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist->hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Unregister field variable histograms when the command fails
An action that names a field on another event needs that field as a
variable, so create_field_var_hist() registers a second hist trigger on
that event to provide it, and records it in
target_hist_data->field_var_hists[].
If a later part of the same command fails, create_actions() returns an
error and event_hist_trigger_parse() jumps to out_free. The write fails
with -EINVAL and sched_switch gets no trigger, but:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \
events/sched/sched_waking/trigger
# echo 'my_synth u64 lat; int a; int b' >> synthetic_events
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\
onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\
>> events/sched/sched_switch/trigger
# cat events/sched/sched_waking/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active]
The second histogram is the one created for 'prio'. It is still active and
still counting.
out_free reaches destroy_field_var_hists(), which frees the
field_var_hists[] entries, but never unregister_field_var_hists(), which is
what removes the triggers and runs only from event_hist_trigger_free(). The
entry is freed and the trigger is left with nothing tracking it.
Unregister the field variable histograms in out_free as well, and record
each one as soon as its trigger is registered rather than after the lookup
that follows it, so no exit can leave a registered trigger untracked. The
entry then belongs to field_var_hists[] and is released by
destroy_field_var_hists(), so freeing it on that exit would be a double
free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Verify event_call identity when updating synth_event refcount
In event_hist_trigger_parse() and hist_unreg_all(), the histogram
registration and unregistration paths look up find_synth_event() using
trace_event_name(file->event_call) and adjust se->ref if a match is
found.
Because find_synth_event() only compares the event basename, registering
or removing a histogram on a non-synthetic trace event whose basename
matches a synthetic event erroneously modifies the synthetic event's
reference count. If a histogram is registered on the non-synthetic
event before the synthetic event is created and removed afterwards,
se->ref is decremented without a matching increment, allowing the
synthetic event to be freed while an active histogram action still holds
a pointer to it.
Introduce find_synth_event_call() to verify that &se->call matches
file->event_call before adjusting se->ref. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/syscalls: Use copy_from_user for the faultable syscall buffer
syscall_copy_user_array() copies the buffer argument of faultable
syscalls (write, pwrite64, ...) with __copy_from_user(), which skips
access_ok(). Use copy_from_user() instead so a non-user address is
rejected and the entry is recorded as faulted.
It could be a security concern for machines that trust perf a bit too
much. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: own the request before clearing ->head
io_waitid_remove_wq() only takes the wait queue lock if ->head is set.
io_waitid_wait() clears ->head first thing, before it tries to become the
owner of the request by bumping ->refs. If somebody else owns the request
at that point, nothing keeps it from completing the request while the
wake up handler is still going to touch it:
CPU0 (io_waitid_wait) CPU1 (io_waitid, holds a ref)
list_del_init(&wait->entry)
smp_store_release(&iw->head, NULL)
__do_wait() finds another child
io_waitid_remove_wq()
// ->head == NULL, no locking
io_waitid_finish(), IOU_COMPLETE
// request freed and reused
atomic_fetch_inc(&iw->refs)
The same goes for __io_waitid_cancel() if it claims the request in that
window. ->refs is part of the per opcode data of the request, so this
increments whatever the next user of the request keeps there. If that
happens to be zero, the handler concludes that it owns the request, and
queues io_waitid_cb() for it. With the window held open by a delay, and
the request reused for a receive that is waiting for data:
BUG: KASAN: slab-use-after-free in __wake_up_common+0x1ca/0x1f0
__wake_up_sync_key+0x36/0x50
sock_def_readable+0xf1/0x420
unix_stream_sendmsg+0x60b/0x1110
Allocated by task 87:
io_arm_apoll+0x1ed/0x940
Freed by task 87:
__io_submit_flush_completions+0x118d/0x1a10
tctx_task_work_run+0x327/0x950
Only clear ->head once the handler owns the request. If it doesn't, the
owner finds ->head set and has to wait for the lock, which is held by the
caller of the handler. Deleting the already deleted entry again is
harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cmd: don't leave list poison in ->hash_node
io_uring_cmd_del_cancelable() uses hlist_del() to take a command off
->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in
->hash_node. Requests are recycled through the request cache without
being reinitialised, and not every user of ->hash_node sets it up before
it is used:
If a vectored futex wait is woken while futex_wait_multiple_setup() is
still queueing the futexes, io_futexv_wait() doesn't add the request to
->futex_list, and leaves the completion to the task_work queued by the
wake up. io_futexv_complete() ends in __io_futex_complete(), whose
hlist_del_init() is fine for a request that is unhashed, which is how all
other users of the node leave it. If the request was a cancelable
uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through
LIST_POISON2:
Oops: general protection fault, probably for non-canonical address
KASAN: maybe wild-memory-access in range [0xdead000000000120-...]
RIP: 0010:io_futexv_complete+0x219/0x420
Call Trace:
tctx_task_work_run+0x804/0x950
tctx_task_work+0x71/0xa0
task_work_run+0x118/0x200
Leave the node unhashed. |
