| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Roundcube Webmail before 1.6.18 and 1.7.x before 1.7.3, the cmd_learn driver of the markasjunk plugin is subject to remote code execution via crafted placeholder replacement values. This issue only affects Roundcube instances using the markasjunk plugin with its cmd_learn driver. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci: validate codec capability element length
Read Local Codec Capabilities returns a sequence of capability elements.
Each element starts with a one-byte length followed by that many payload
bytes.
hci_read_codec_capabilities() checks that the skb contains the length
byte, but then validates only caps->len against the remaining skb
length. A malformed controller response with one remaining byte and
caps->len set to one passes that check even though the element needs two
bytes. The parser then records a two-byte capability and copies one
byte beyond the advertised response payload into the codec list.
Validate the full element size, including the length byte, before adding
it to the accumulated capability length. This preserves all well-formed
capability elements and drops only truncated controller responses. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to execute arbitrary code due to a stack-based buffer overflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 is vulnerable to privilege escalation via Navigator for i. An authenticated user could elevate privileges to a root user to execute commands. |
| A heap out-of-bounds write vulnerability in the Linux kernel's Performance Events system component can be exploited to achieve local privilege escalation.
A perf_event's read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group().
We recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix KASAN slab-out-of-bounds in amdgpu_coredump ring dump
The ring content dump in amdgpu_coredump() uses two separate loops over
adev->rings[]: the first counts rings with unsignalled fences to size
the allocation, and the second copies ring data into the allocated
buffers.
Both loops use the same condition to skip rings:
atomic_read(&ring->fence_drv.last_seq) == ring->fence_drv.sync_seq
Because last_seq is an atomic that is updated concurrently by the fence
signalling path, additional rings may appear unsignalled in the second
loop that were signalled during the first. When this happens, idx
exceeds the allocated ring_count and the store to coredump->rings[idx]
writes past the end of the kcalloc-ed buffer.
This was found during IGT stressful test amd_queue_reset which
triggers random GPU resets. The OVERSIZE subtest
(CMD_STREAM_EXEC_INVALID_PACKET_LENGTH_OVERSIZE on GFX ring) provokes
a ring timeout and subsequent coredump, which hits the race between
the counting and copying loops. The failure is non-deterministic and
depends on fence signalling timing during the reset.
KASAN log:
BUG: KASAN: slab-out-of-bounds in amdgpu_coredump+0x1274/0x12f0 [amdgpu]
Write of size 4 at addr ffff888106154258 by task kworker/u128:5/23625
CPU: 16 UID: 0 PID: 23625 Comm: kworker/u128:5 Not tainted 6.19.0+ #35
Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched]
Call Trace:
<TASK>
dump_stack_lvl+0xa5/0x110
print_report+0xd1/0x660
kasan_report+0xf3/0x130
__asan_report_store4_noabort+0x17/0x30
amdgpu_coredump+0x1274/0x12f0 [amdgpu]
amdgpu_job_timedout+0xef0/0x16c0 [amdgpu]
drm_sched_job_timedout+0x194/0x5c0 [gpu_sched]
process_one_work+0x84b/0x1990
worker_thread+0x6b8/0x11b0
</TASK>
Allocated by task 23625:
kasan_save_stack+0x39/0x70
__kasan_kmalloc+0xc3/0xd0
__kmalloc_noprof+0x2ec/0x910
amdgpu_coredump+0x5c5/0x12f0 [amdgpu]
amdgpu_job_timedout+0xef0/0x16c0 [amdgpu]
The buggy address belongs to the object at ffff888106154200
which belongs to the cache kmalloc-rnd-09-96 of size 96
The buggy address is located 16 bytes to the right of
allocated 72-byte region [ffff888106154200, ffff888106154248)
72 bytes = 3 * sizeof(struct amdgpu_coredump_ring), so ring_count was 3
but idx reached 3+, writing ring_index (at struct offset 16) 16 bytes
past the allocation.
Fix by adding an idx < ring_count guard to the copy loop so it cannot
exceed the allocated count even when the fence state changes between
the two passes. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to improper bounds checking. |
| IBM i 7.6, and 7.5 could allow a local attacker to gain elevated privileges due to improper neutralization of special elements used in an OS command. |
| Out-of-bounds write in .NET allows an unauthorized attacker to execute code locally. |
| Nozomi Networks Labs identified a CWE-787: Out-of-bounds Write vulnerability in the process-image management functionality of KUNBUS piControl in version 2.6.2 that allows a local authenticated attacker with device configuration access to write attacker-controlled data outside the bounds of the process-image buffer and corrupt adjacent kernel memory, resulting in kernel memory corruption and denial of service, by supplying crafted device configuration data and crafted input through the piControl character device. |
| VP8L decoding in golang.org/x/image/vp8l can allocate an excessive amount of memory when processing a crafted VP8L image containing many unused Huffman tree groups. This allows a remote attacker to cause a denial of service via memory exhaustion. |
| A critical OS command injection vulnerability has been identified in the
Haiwell IoT Cloud HMI Gateway product. The vulnerability exists in the
Net Check feature accessible via the /setting endpoint. The cmdPing
Socket.io event fails to properly sanitize user-supplied input before
passing it to the underlying operating system, allowing an attacker to
inject and execute arbitrary OS commands with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Fix TOCTOU in bytes_put and bytes_get
In sof_ipc3_bytes_put(), the size used for the memcpy is derived from
the old data->size already in the buffer, not the incoming new data's
size field. If the new data has a different size, the copy length is
wrong: it may truncate valid data or copy stale bytes.
Similarly, sof_ipc3_bytes_get() checks data->size against max_size
without accounting for the sizeof(struct sof_ipc_ctrl_data) offset
of the flex array within the allocation.
Fix bytes_put to validate and use the incoming data's sof_abi_hdr.size
from ucontrol before copying. Fix bytes_get to subtract sizeof(*cdata)
from the bounds check to match the actual available space. |
| A weakness has been identified in GL.iNet A1300, AX1800, AXT1800, BE1400, BE3600, BE6500, BE9300, BE10000, E5800, MT2500, MT3000, MT3600BE, MT5000, MT6000, X2000, X3000 and XE3000 up to 4.8.x. This affects an unknown part of the component Wi-Fi Timer Power-Schedule Feature. Executing a manipulation of the argument switch_power/restore_power can lead to os command injection. The attack can be launched remotely. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative const offsets for buffer pointers
The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses, but it currently accepts a constant negative offset produced by
pointer arithmetic.
Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for
pointers") moved constant pointer offsets from reg->off to reg->var_off.
However, __check_buffer_access() continued to check only the instruction
offset. An access with reg->var_off equal to -8 and an instruction offset
of zero therefore passes verification.
For writable raw tracepoints, the access end is also calculated from the
unsigned reg->var_off.value. An eight-byte access starting at -8 wraps
the calculated end to zero, allowing the program to load and attach
without increasing max_tp_access.
After ensuring that reg->var_off is constant, calculate the effective
access start using signed arithmetic and reject it when it is negative.
Use the validated start to calculate the access end for both
PTR_TO_TP_BUFFER and PTR_TO_BUF. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/crossbar: Use correct index in crossbar_domain_free()
crossbar_domain_free() resets the domain data and then uses the nulled
out irq_data->hwirq member as index to reset the irq_map[] entry and to
write the relevant crossbar register with a safe entry. That means it
never frees the correct index and keeps the crossbar register connection
to the source interrupt active.
If it would not reset the domain data, then this would be even worse as
irq_data->hwirq holds the source interrupt number, but both the map and
register index need the corresponding GIC SPI number and not the source
interrupt number. This might even result in an out of bounds access as
the source interrupt number can be higher than the maximal index space.
Fix this by using the GIC SPI index from the parent domain's irq_data. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: probes: save original sp in rethook trampoline
Reading a word from the stack in a kretprobe crashes a risc-v kernel.
$ cd /sys/kernel/tracing/
$ echo 'r n_tty_write $stack0' > dynamic_events
$ echo 1 > events/kprobes/enable
Unable to handle kernel paging request at virtual address 0000000200000128
...
[<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38
[<ffffffff80177196>] process_fetch_insn+0x3ee/0x760
[<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0
[<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58
[<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90
[<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108
[<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c
[<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94
[<ffffffff8067872a>] tty_write+0x1a/0x30
In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value.
arch_rethook_trampoline saves the registers from the probed function in a
struct pt_regs. sp is not saved. Instead, sp is decremented for
arch_rethook_trampoline's local stack.
Fix this crash and save the original sp along with the other registers.
Use a0 as a temporary register, it is overwritten anyway.
[pjw@kernel.org: added Fixes tag; cc'ed stable] |
| A flaw has been found in jiantao88 android-mcp-server up to cfb872b2446794193b58edd63f4dbf6af48a6292. The impacted element is the function child_process.exec of the file build/index.js of the component Command Execution. Executing a manipulation of the argument deviceId/packageName/permission/extras[].key/extras[].value can lead to os command injection. It is possible to launch the attack on the local host. The exploit has been published and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. This patch is called 14e2bf27c88ba137e35cbb0c2a75f72b595bb98a. It is advisable to implement a patch to correct this issue. |
| GitPython before 3.1.54 contains an incomplete denylist in unsafe_git_clone_options that omits --template, allowing attackers to achieve arbitrary command execution during clone operations. Attackers can supply --template pointing to a directory containing malicious post-checkout hooks that execute when git clones the repository. |
| GitPython versions before 3.1.54 contain a remote code execution vulnerability in the check_unsafe_options guard that can be bypassed by smuggling git options inside single-character kwarg values. Attackers can supply crafted option dictionaries to clone_from, fetch, pull, push, ls_remote, iter_commits, blame, or archive methods to execute arbitrary OS commands via the --upload-pack parameter. |
