| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
dm clone: Fix UAF in clone_dtr()
Dm_clone also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.
Therefore, cancelling timer again in clone_dtr(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Check whether transferred 2D BO is shmem
Transferred 2D BO always must be a shmem BO. Add check for that to prevent
NULL dereference if userspace passes a VRAM BO. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix mmap write lock not release
If mmap write lock is taken while draining retry fault, mmap write lock
is not released because svm_range_restore_pages calls mmap_read_unlock
then returns. This causes deadlock and system hangs later because mmap
read or write lock cannot be taken.
Downgrade mmap write lock to read lock if draining retry fault fix this
bug. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add overflow check for attribute size
The offset addition could overflow and pass the used size check given an
attribute with very large size (e.g., 0xffffff7f) while parsing MFT
attributes. This could lead to out-of-bound memory R/W if we try to
access the next attribute derived by Add2Ptr(attr, asize)
[ 32.963847] BUG: unable to handle page fault for address: ffff956a83c76067
[ 32.964301] #PF: supervisor read access in kernel mode
[ 32.964526] #PF: error_code(0x0000) - not-present page
[ 32.964893] PGD 4dc01067 P4D 4dc01067 PUD 0
[ 32.965316] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 32.965727] CPU: 0 PID: 243 Comm: mount Not tainted 5.19.0+ #6
[ 32.966050] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 32.966628] RIP: 0010:mi_enum_attr+0x44/0x110
[ 32.967239] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a
[ 32.968101] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283
[ 32.968364] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f
[ 32.968651] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8
[ 32.968963] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f
[ 32.969249] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000
[ 32.969870] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170
[ 32.970655] FS: 00007fdab8189e40(0000) GS:ffff9569fdc00000(0000) knlGS:0000000000000000
[ 32.971098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 32.971378] CR2: ffff956a83c76067 CR3: 0000000002c58000 CR4: 00000000000006f0
[ 32.972098] Call Trace:
[ 32.972842] <TASK>
[ 32.973341] ni_enum_attr_ex+0xda/0xf0
[ 32.974087] ntfs_iget5+0x1db/0xde0
[ 32.974386] ? slab_post_alloc_hook+0x53/0x270
[ 32.974778] ? ntfs_fill_super+0x4c7/0x12a0
[ 32.975115] ntfs_fill_super+0x5d6/0x12a0
[ 32.975336] get_tree_bdev+0x175/0x270
[ 32.975709] ? put_ntfs+0x150/0x150
[ 32.975956] ntfs_fs_get_tree+0x15/0x20
[ 32.976191] vfs_get_tree+0x2a/0xc0
[ 32.976374] ? capable+0x19/0x20
[ 32.976572] path_mount+0x484/0xaa0
[ 32.977025] ? putname+0x57/0x70
[ 32.977380] do_mount+0x80/0xa0
[ 32.977555] __x64_sys_mount+0x8b/0xe0
[ 32.978105] do_syscall_64+0x3b/0x90
[ 32.978830] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 32.979311] RIP: 0033:0x7fdab72e948a
[ 32.980015] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 32.981251] RSP: 002b:00007ffd15b87588 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[ 32.981832] RAX: ffffffffffffffda RBX: 0000557de0aaf060 RCX: 00007fdab72e948a
[ 32.982234] RDX: 0000557de0aaf260 RSI: 0000557de0aaf2e0 RDI: 0000557de0ab7ce0
[ 32.982714] RBP: 0000000000000000 R08: 0000557de0aaf280 R09: 0000000000000020
[ 32.983046] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000557de0ab7ce0
[ 32.983494] R13: 0000557de0aaf260 R14: 0000000000000000 R15: 00000000ffffffff
[ 32.984094] </TASK>
[ 32.984352] Modules linked in:
[ 32.984753] CR2: ffff956a83c76067
[ 32.985911] ---[ end trace 0000000000000000 ]---
[ 32.986555] RIP: 0010:mi_enum_attr+0x44/0x110
[ 32.987217] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a
[ 32.988232] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283
[ 32.988532] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f
[ 32.988916] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8
[ 32.989356] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f
[ 32.989994] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000
[ 32.990415] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170
[ 32.991011] FS:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: snic: Fix possible UAF in snic_tgt_create()
Smatch reports a warning as follows:
drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn:
'&tgt->list' not removed from list
If device_add() fails in snic_tgt_create(), tgt will be freed, but
tgt->list will not be removed from snic->disc.tgt_list, then list traversal
may cause UAF.
Remove from snic->disc.tgt_list before free(). |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix potential buffer head reference count leak
As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without
update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head
from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to
buffer head buffer head reference count leak.
To solve above issue, update 'journal->j_fc_off' before return -EIO. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stream: purge sk_error_queue in sk_stream_kill_queues()
Changheon Lee reported TCP socket leaks, with a nice repro.
It seems we leak TCP sockets with the following sequence:
1) SOF_TIMESTAMPING_TX_ACK is enabled on the socket.
Each ACK will cook an skb put in error queue, from __skb_tstamp_tx().
__skb_tstamp_tx() is using skb_clone(), unless
SOF_TIMESTAMPING_OPT_TSONLY was also requested.
2) If the application is also using MSG_ZEROCOPY, then we put in the
error queue cloned skbs that had a struct ubuf_info attached to them.
Whenever an struct ubuf_info is allocated, sock_zerocopy_alloc()
does a sock_hold().
As long as the cloned skbs are still in sk_error_queue,
socket refcount is kept elevated.
3) Application closes the socket, while error queue is not empty.
Since tcp_close() no longer purges the socket error queue,
we might end up with a TCP socket with at least one skb in
error queue keeping the socket alive forever.
This bug can be (ab)used to consume all kernel memory
and freeze the host.
We need to purge the error queue, with proper synchronization
against concurrent writers. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
The kfree() should be called when of_irq_get_byname() fails or
devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(),
otherwise there will be a memory leak, so add kfree() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: add miss release buffer head in fc_do_one_pass()
In fc_do_one_pass() miss release buffer head after use which will lead
to reference count leak. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works
syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq
WQ into hdev->workqueue WQ which is under draining operation [1], for
commit c8efcc2589464ac7 ("workqueue: allow chained queueing during
destruction") does not allow such operation.
The check introduced by commit 877afadad2dce8aa ("Bluetooth: When HCI work
queue is drained, only queue chained work") was incomplete.
Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because
hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect
the queuing operation with RCU read lock in order to avoid calling
queue_delayed_work() after cancel_delayed_work() completed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()
The wilc_mac_xmit() returns NETDEV_TX_OK without freeing skb, add
dev_kfree_skb() to fix it. Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()
hd44780_probe() allocates a memory chunk for hd with kzalloc() and
makes "lcd->drvdata->hd44780" point to it. When we call hd44780_remove(),
we should release all relevant memory and resource. But "lcd->drvdata
->hd44780" is not released, which will lead to a memory leak.
We should release the "lcd->drvdata->hd44780" in hd44780_remove() to fix
the memory leak bug. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
It is possible that skb is freed in ath9k_htc_rx_msg(), then
usb_submit_urb() fails and we try to free skb again. It causes
use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes
NULL but rx_buf is not freed and there can be a memory leak.
The patch removes unnecessary nskb and makes skb processing more clear: it
is supposed that ath9k_htc_rx_msg() either frees old skb or passes its
managing to another callback function.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: zynqmp: Fix stack-out-of-bounds in strncpy`
"BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68"
Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is
longer than 15 bytes, string terminated NULL character will not be received
by Linux. Add explicit NULL character at last byte to fix issues when clock
name is longer.
This fixes below bug reported by KASAN:
==================================================================
BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68
Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3
Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT)
Call trace:
dump_backtrace+0x0/0x1e8
show_stack+0x14/0x20
dump_stack+0xd4/0x108
print_address_description.isra.0+0xbc/0x37c
__kasan_report+0x144/0x198
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
strncpy+0x30/0x68
zynqmp_clock_probe+0x238/0x7b8
platform_drv_probe+0x6c/0xc8
really_probe+0x14c/0x418
driver_probe_device+0x74/0x130
__device_attach_driver+0xc4/0xe8
bus_for_each_drv+0xec/0x150
__device_attach+0x160/0x1d8
device_initial_probe+0x10/0x18
bus_probe_device+0xe0/0xf0
device_add+0x528/0x950
of_device_add+0x5c/0x80
of_platform_device_create_pdata+0x120/0x168
of_platform_bus_create+0x244/0x4e0
of_platform_populate+0x50/0xe8
zynqmp_firmware_probe+0x370/0x3a8
platform_drv_probe+0x6c/0xc8
really_probe+0x14c/0x418
driver_probe_device+0x74/0x130
device_driver_attach+0x94/0xa0
__driver_attach+0x70/0x108
bus_for_each_dev+0xe4/0x158
driver_attach+0x30/0x40
bus_add_driver+0x21c/0x2b8
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
zynqmp_firmware_driver_init+0x1c/0x24
do_one_initcall+0xa4/0x234
kernel_init_freeable+0x1b0/0x24c
kernel_init+0x10/0x110
ret_from_fork+0x10/0x18
The buggy address belongs to the page:
page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff
page dumped because: kasan: bad access detected
addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame:
zynqmp_clock_probe+0x0/0x7b8
this frame has 3 objects:
[32, 44) 'response'
[64, 80) 'ret_payload'
[96, 112) 'name'
Memory state around the buggy address:
ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2
>ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
================================================================== |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix memory leak in lpfc_create_port()
Commit 5e633302ace1 ("scsi: lpfc: vmid: Add support for VMID in mailbox
command") introduced allocations for the VMID resources in
lpfc_create_port() after the call to scsi_host_alloc(). Upon failure on the
VMID allocations, the new code would branch to the 'out' label, which
returns NULL without unwinding anything, thus skipping the call to
scsi_host_put().
Fix the problem by creating a separate label 'out_free_vmid' to unwind the
VMID resources and make the 'out_put_shost' label call only
scsi_host_put(), as was done before the introduction of allocations for
VMID. |
| In the Linux kernel, the following vulnerability has been resolved:
ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection()
Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose()
with a subdev state of NULL leads to a NULL pointer dereference. This
can currently happen in imgu_subdev_set_selection() when the state
passed in is NULL, as this method first gets pointers to both the "try"
and "active" states and only then decides which to use.
The same issue has been addressed for imgu_subdev_get_selection() with
commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active
selection access"). However the issue still persists in
imgu_subdev_set_selection().
Therefore, apply a similar fix as done in the aforementioned commit to
imgu_subdev_set_selection(). To keep things a bit cleaner, introduce
helper functions for "crop" and "compose" access and use them in both
imgu_subdev_set_selection() and imgu_subdev_get_selection(). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init()
dmc620_pmu_init() won't remove the callback added by
cpuhp_setup_state_multi() when platform_driver_register() failed. Remove
the callback by cpuhp_remove_multi_state() in fail path.
Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus:
arm-ccn: Prevent hotplug callback leak") |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix running_req for internal abort commands
Disabling the remote phy for a SATA disk causes a hang:
root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols
sata
root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable
root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed
[ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache
[ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK
[ 67.935094] sd 0:0:2:0: [sdc] Stopping disk
[ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK
...
[ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds.
[ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218
[ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008
[ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker
[ 124.034319] Call trace:
[ 124.036758] __switch_to+0x128/0x278
[ 124.040333] __schedule+0x434/0xa58
[ 124.043820] schedule+0x94/0x138
[ 124.047045] schedule_timeout+0x2fc/0x368
[ 124.051052] wait_for_completion+0xdc/0x200
[ 124.055234] __flush_workqueue+0x1a8/0x708
[ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0
[ 124.063858] sas_port_event_worker+0x60/0x98
[ 124.068126] process_one_work+0x3f8/0x660
[ 124.072134] worker_thread+0x70/0x700
[ 124.075793] kthread+0x1a4/0x1b8
[ 124.079014] ret_from_fork+0x10/0x20
The issue is that the per-device running_req read in
pm8001_dev_gone_notify() never goes to zero and we never make progress.
This is caused by missing accounting for running_req for when an internal
abort command completes.
In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support")
we started to send internal abort commands as a proper sas_task. In this
when we deliver a sas_task to HW the per-device running_req is incremented
in pm8001_queue_command(). However it is never decremented for internal
abort commnds, so decrement in pm8001_mpi_task_abort_resp(). |
