| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in an API endpoint of multiple Cisco Unified Communications Products could allow an unauthenticated, remote attacker to cause high CPU utilization, which could impact access to the web-based management interface and cause delays with call processing. This API is not used for device management and is unlikely to be used in normal operations of the device.
This vulnerability is due to improper API authentication and incomplete validation of the API request. An attacker could exploit this vulnerability by sending a crafted HTTP request to a specific API on the device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to high CPU utilization, which could negatively impact user traffic and management access. When the attack stops, the device will recover without manual intervention. |
| A vulnerability in an API of the Web Bridge feature of Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to insufficient validation of HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause a partial availability condition, which could cause ongoing video calls to be dropped due to the invalid packets reaching the Web Bridge. |
| A vulnerability in the command line interface (cli) management interface of Cisco SD-WAN vManage could allow an authenticated, local attacker to bypass authorization and allow the attacker to roll back the configuration on vManage controllers and edge router device.
This vulnerability is due to improper access control in the cli-management interface of an affected system. An attacker with low-privilege (read only) access to the cli could exploit this vulnerability by sending a request to roll back the configuration on for other controller and devices managed by an affected system. A successful exploit could allow the attacker to to roll back the configuration on for other controller and devices managed by an affected system. |
| Multiple Cisco products are affected by a vulnerability in Snort access control policies that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system.
This vulnerability is due to a logic error that occurs when the access control policies are being populated. An attacker could exploit this vulnerability by establishing a connection to an affected device. A successful exploit could allow the attacker to bypass configured access control rules on the affected system. |
| Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. |
| A vulnerability in the internal packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain packets when they are sent to the inspection engine. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to deplete all 9,472 byte blocks on the device, resulting in traffic loss across the device or an unexpected reload of the device. If the device does not reload on its own, a manual reload of the device would be required to recover from this state. |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of certain L2TP packets. An attacker could exploit this vulnerability by sending crafted L2TP packets to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
Note: Only traffic directed to the affected system can be used to exploit this vulnerability. |
| A vulnerability in Application Quality of Experience (AppQoE) and Unified Threat Defense (UTD) on Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to the mishandling of a crafted packet stream through the AppQoE or UTD application. An attacker could exploit this vulnerability by sending a crafted packet stream through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in Cisco DNA Center could allow an unauthenticated, remote attacker to read and modify data in a repository that belongs to an internal service on an affected device.
This vulnerability is due to insufficient access control enforcement on API requests. An attacker could exploit this vulnerability by sending a crafted API request to an affected device. A successful exploit could allow the attacker to read and modify data that is handled by an internal service on the affected device. |
| A vulnerability in the scanning engines of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to bypass a configured rule, allowing traffic onto a network that should have been blocked.
This vulnerability is due to improper detection of malicious traffic when the traffic is encoded with a specific content format. An attacker could exploit this vulnerability by using an affected device to connect to a malicious server and receiving crafted HTTP responses. A successful exploit could allow the attacker to bypass an explicit block rule and receive traffic that should have been rejected by the device. |
| A vulnerability in the AutoIt module of ClamAV could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to a logic error in the memory management of an affected device. An attacker could exploit this vulnerability by submitting a crafted AutoIt file to be scanned by ClamAV on the affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to restart unexpectedly, resulting in a DoS condition. |
| A vulnerability in Cisco BroadWorks could allow an authenticated, local attacker to elevate privileges to the root user on an affected device.
The vulnerability is due to insufficient input validation by the operating system CLI. An attacker could exploit this vulnerability by issuing a crafted command to the affected system. A successful exploit could allow the attacker to execute commands as the root user. To exploit this vulnerability, an attacker must have valid BroadWorks administrative privileges on the affected device. |
| Multiple vulnerabilities in Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated attacker with Administrator-level read-only credentials to elevate their privileges to Administrator with read-write credentials on an affected system. Note: "Cisco Expressway Series" refers to Cisco Expressway Control (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the Multicast Leaf Recycle Elimination (mLRE) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.
This vulnerability is due to incorrect handling of certain IPv6 multicast packets when they are fanned out more than seven times on an affected device. An attacker could exploit this vulnerability by sending a specific IPv6 multicast or IPv6 multicast VPN (MVPNv6) packet through the affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition. |
| A vulnerability in the SSL file policy implementation of Cisco Firepower Threat Defense (FTD) Software that occurs when the SSL/TLS connection is configured with a URL Category and the Snort 3 detection engine could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to unexpectedly restart. This vulnerability exists because a logic error occurs when a Snort 3 detection engine inspects an SSL/TLS connection that has either a URL Category configured on the SSL file policy or a URL Category configured on an access control policy with TLS server identity discovery enabled. Under specific, time-based constraints, an attacker could exploit this vulnerability by sending a crafted SSL/TLS connection through an affected device. A successful exploit could allow the attacker to trigger an unexpected reload of the Snort 3 detection engine, resulting in either a bypass or denial of service (DoS) condition, depending on device configuration. The Snort 3 detection engine will restart automatically. No manual intervention is required. |
| Multiple vulnerabilities in the web-based management interface of Cisco Prime Infrastructure and Cisco Evolved Programmable Network Manager (EPNM) could allow a remote attacker to obtain privileged information and conduct cross-site scripting (XSS) and cross-site request forgery (CSRF) attacks. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the SFTP server implementation for Cisco Nexus 3000 Series Switches and 9000 Series Switches in standalone NX-OS mode could allow an authenticated, remote attacker to download or overwrite files from the underlying operating system of an affected device.
This vulnerability is due to a logic error when verifying the user role when an SFTP connection is opened to an affected device. An attacker could exploit this vulnerability by connecting and authenticating via SFTP as a valid, non-administrator user. A successful exploit could allow the attacker to read or overwrite files from the underlying operating system with the privileges of the authenticated user.
There are workarounds that address this vulnerability. |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to access sensitive information.
This vulnerability is due to the improper storage of sensitive information within the web-based management interface. An attacker could exploit this vulnerability by logging in to the web-based management interface and viewing hidden fields within the application. A successful exploit could allow the attacker to access sensitive information, including device entry credentials, that could aid the attacker in further attacks. |
| Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to delete or read arbitrary files on the underlying operating system. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the change password functionality of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with Read-only credentials to elevate privileges to Administrator on an affected system.
This vulnerability is due to incorrect handling of password change requests. An attacker could exploit this vulnerability by authenticating to the application as a Read-only user and sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to alter the passwords of any user on the system, including an administrative user, and then impersonate that user.
Note: Cisco Expressway Series refers to the Expressway Control (Expressway-C) device and the Expressway Edge (Expressway-E) device. |
