| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SGLang contains an unauthenticated RCE in /load_lora_adapter_from_tensors via bypass of SafeUnpickler’s incomplete denylist, allowing arbitrary command execution through crafted base64-encoded pickle payloads. |
| Improper access control for register interface in the Input-Output Memory Management Unit (IOMMU) could allow a privileged attacker to cause non-coherent accesses by the AMD Secure Processor (ASP), potentially resulting in loss of integrity. |
| Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path). |
| LightFTP 2.3.1 contains a race condition vulnerability that allows remote attackers to crash the server by racing a fresh connection that reuses the FTP context against an in-progress ABRT cleanup. Attackers can exploit the unprotected re-check of WorkerThreadId between worker_thread_cleanup() and pthread_join() outside of MTLock to cause pthread_join() to operate on an invalid thread ID, resulting in a server crash. CVE-2024-11144 identifies an incomplete fix of this vulnerability. |
| Wings is the server control plane for Pterodactyl, a free, open-source game server management panel. Prior to 1.13.0, unbounded json, yaml, and xml configuration-file parsers in parser.go can process an oversized non-file parser configuration file and exhaust Wings process memory. This issue is fixed in version 1.13.0. |
| A vulnerability in the web interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to log in to an affected device using a low-privileged account to access sensitive data within the impacted systems.
This vulnerability is due to the presence of static user credentials for a low-privileged account. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to log in to the affected system and access sensitive data as the low-privileged user.
Note: If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced.
Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates. The reason is that this vulnerability can be used with other Cisco Secure FMC Software vulnerabilities to elevate privileges. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Updates Environment Management). Supported versions that are affected are 8.61 and 8.62. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| pgAdmin 4's Import/Export Data tool builds a psql \copy (...) command line by interpolating a user-supplied SQL query into a Jinja template and passing the rendered line to psql via --command. To stop an attacker from breaking out of the (...) wrapper, create_import_export_job() (route POST /import_export/job/<sid>, gated only by the ordinary, commonly-granted tools_import_export_data permission) validated the query with a hand-written parenthesis-balance checker, _is_query_parens_balanced(). That checker always treated a backslash before a single quote (\') as escaping the quote, i.e. as if standard_conforming_strings were off. PostgreSQL has defaulted standard_conforming_strings to on since 9.1 (2010), the default on every PostgreSQL version pgAdmin 4 currently supports (13-18); under that default psql's own \copy tokenizer treats \ as an ordinary character, so a single quote immediately after it closes the string literal. A query such as SELECT 'a\') TO PROGRAM 'echo pwned' x' was therefore accepted as "balanced" by pgAdmin's checker (which believed the ) was still inside the string), while psql, run through the actual rendered command line, closes the string at that point and treats the following ) as the end of the wrapping \copy (...) subquery, exposing an attacker-chosen TO PROGRAM '<command>' clause that psql executes via popen() -- independent of a subsequent syntax error later on the same line. This is the same class of bug as CVE-2025-12762/CVE-2025-13780 (RCE via psql meta-command/COPY injection during PLAIN-format dump restore), reached through an independently written defense in a different module (Import/Export Data rather than Restore) that had its own, different logic bug (inverted backslash-escape semantics rather than a BOM-defeated regex anchor).
The fix rejects any backslash inside a single-quoted string in the query outright, rather than picking one of the two possible psql interpretations. This is intentionally conservative: because the correct interpretation of \ depends on the target server's standard_conforming_strings setting, which the checker cannot reliably know at validation time, refusing the query is safer than guessing.
This issue affects pgAdmin 4: from the introduction of _is_query_parens_balanced() before 9.18. |
| Cross-site Scripting in the lead index view in Roskus Prospero Flow CRM before 5.3.7 allows authenticated users holding the create or update lead permission to execute arbitrary JavaScript in the application origin via HTML markup stored in the lead name field, which the view renders through Blade's unescaped output directive and inside a JavaScript string literal in an onclick attribute. |
| The Kirki WordPress plugin before 6.0.13 does not restrict which classes may be instantiated when it deserialises data that unauthenticated users can store, leading to PHP Object Injection that is triggered when an administrator later reviews the stored data. With a suitable gadget chain present on the site (via another installed Kirki WordPress plugin before 6.0.13, , or an outdated WordPress version), this could be leveraged to perform a variety of attacks, such as remote code execution. |
| The Kirki WordPress plugin before 6.0.13 does not properly sanitise and escape a value taken from the request before using it in a SQL statement, allowing unauthenticated attackers to perform SQL injection attacks. |
| The ElementsKit Elementor Addons WordPress plugin before 3.10.01 does not prevent a custom-widget definition saved by a user with administrative capabilities from being written verbatim into a generated PHP file that the ElementsKit Elementor Addons WordPress plugin before 3.10.01 subsequently executes, allowing arbitrary PHP code to run on the server; on a multisite network this lets a non-super subsite Administrator, who is otherwise denied code/file editing, reach host-level code execution beyond the privileges the network grants them. |
| The wpForo Forum WordPress plugin before 3.1.2 does not verify that an AI chat conversation belongs to the requesting user before deleting its messages, allowing users with a subscriber-level account to permanently delete the stored AI chat message history of any other user. |
| The Frontend Admin by DynamiApps WordPress plugin before 3.29.9 decodes HTML entities in a submitted form field value after sanitizing it, which restores HTML tags that the sanitizer had neutralized. A double-encoded payload submitted by an unauthenticated visitor is therefore stored as a live tag and later output without escaping on the Frontend Admin by DynamiApps WordPress plugin before 3.29.9's front-end display surfaces, resulting in stored cross-site scripting that executes in the browser of any user, including an administrator, who views a page displaying the submitted value. |
| The security fix for CVE-2025-66518 is incomplete. Any client who can access to Apache Kyuubi Server via Kyuubi frontend protocols can bypass server-side config kyuubi.session.local.dir.allowlist via unprefixed Spark config aliases.
This issue affects Apache Kyuubi: from 1.6.0 before 1.12.0.
Users are recommended to upgrade to version 1.12.0, which fixes the issue. |
| Path traversal vulnerability in Apache Zeppelin. When FileSystemNotebookRepo is configured, an authenticated attacker with permission to rename a note, or access to folder operations, could supply traversal segments in note or folder paths. Zeppelin composed these values into filesystem paths using the server's filesystem or Hadoop identity without ensuring that the result remained under the configured notebook directory. This could allow notebook files or directories to be moved, written, or deleted outside the notebook root. This issue affects Apache Zeppelin versions 0.9.0 through 0.12.0. Users are recommended to upgrade to version 0.12.1, which fixes this issue. |
| Inappropriate implementation in ScriptInjections in Google Chrome on iOS prior to 150.0.7871.47 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in Extensions in Google Chrome prior to 150.0.7871.47 allowed an attacker who convinced a user to install a malicious extension to perform UI spoofing via a crafted Chrome Extension. (Chromium security severity: Medium) |
| Inappropriate implementation in PerformanceAPIs in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in SplitView in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
