| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OliveTin gives access to predefined shell commands from a web interface. In versions 3000.0.0 and prior, the template engine uses a single shared text/template.Template instance (tpl package-level variable in service/internal/tpl/templates.go) across all goroutines. Every action execution calls tpl.Parse(source) followed by t.Execute() on this shared instance with no synchronization. When two or more actions execute concurrently (which is the normal case — each ExecRequest spawns a goroutine), a race condition occurs: one goroutine's Parse overwrites the template tree while another goroutine is calling Execute, causing cross-user command contamination, Go runtime panic, and incorrect command execution. This issue has been resolved in version 3000.13.0. |
| Missing Authentication for Critical Function (CWE-306) in the RegisterView (apps/accounts/views.py), exposed at POST /api/auth/register/, in MailerUp <1.0.1 allows a remote, unauthenticated attacker to self-register a working account on instances where registration is intended to be restricted, because the endpoint applies the AllowAny permission with no email verification, CAPTCHA, or administrator approval. Any account created this way can read all email stored by the instance, resulting in full disclosure of stored messages to an arbitrary unauthenticated attacker |
| A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure. |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted Online Certificate Status Protocol (OCSP) response during a TLS handshake. Due to a logic error in how gnutls processes multi-record OCSP responses, a client with OCSP verification enabled may incorrectly accept a revoked server certificate, potentially leading to a compromise of trust. |
| A flaw was found in gnutls. An off-by-one error exists in the PKCS#12 bag element bounds check. This vulnerability allows an remote attacker to write past the internal array of a PKCS#12 bag when appending to a bag that already contains 32 elements. This memory corruption could lead to a denial of service (DoS) or potentially other unspecified impacts. |
| A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks. |
| A flaw was found in GnuTLS. The `gnutls_pkcs11_token_set_pin` function, used for changing the Security Officer PIN, can lead to a use-after-free vulnerability. This occurs when an attacker attempts to change the PIN with a NULL old PIN for a token that lacks a protected authentication path. |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted certificate that contains Uniform Resource Identifier (URI) or Service (SRV) Subject Alternative Names (SANs). This could cause the certificate validation process to incorrectly fall back to checking DNS hostnames against the Common Name (CN), potentially allowing the attacker to spoof legitimate services or intercept sensitive information. |
| A flaw was found in gnutls. This vulnerability occurs because permitted name constraints were incorrectly ignored when previous Certificate Authorities (CAs) only had excluded name constraints. A remote attacker could exploit this to bypass critical name constraint checks during certificate validation. This bypass could lead to the acceptance of invalid certificates, potentially enabling spoofing or man-in-the-middle attacks against affected systems. |
| A flaw was found in libgnutls. A remote attacker, by sending an extremely short premaster secret during an RSA key exchange to a server using an RSA key backed by a PKCS#11 token, could trigger a short heap overread. This memory corruption vulnerability could lead to information disclosure. |
| A flaw was found in gnutls. This vulnerability occurs because gnutls performs case-sensitive comparisons of `nameConstraints` labels, specifically for `dNSName` (DNS) or `rfc822Name` (email) constraints within `excludedSubtrees` or `permittedSubtrees`. A remote attacker can exploit this by crafting a leaf certificate with casing differences in the Subject Alternative Name (SAN), leading to a policy bypass where a certificate that should be rejected is instead accepted. This could result in unauthorized access or information disclosure. |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver |
| The AI Share & Summarize WordPress plugin before 2.0.4 does not sanitise and escape some of its shortcode attributes before outputting them in a page, allowing users with the Contributor role and above to perform Stored Cross-Site Scripting attacks. |
| Multiple Shapedsmart-post-show-pro WordPress plugin before 4.0.2, Real Testimonials Pro WordPress plugin before 3.2.5, Product Slider for WooCommerce Pro WordPress plugin before 3.5.3 Pro smart-post-show-pro WordPress plugin before 4.0.2, Real Testimonials Pro WordPress plugin before 3.2.5, Product Slider for WooCommerce Pro WordPress plugin before 3.5.3 were distributed with malicious code through the vendor's compromised update server, allowing unauthenticated attackers to deploy a second-stage payload that exfiltrates credentials and other sensitive data and grants full control of affected sites. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix VM_BIND UNMAP locking
Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.
Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.
Patchwork: https://patchwork.freedesktop.org/patch/713898/ |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local
kptr") refactored map_kptr_match_type() to branch on btf_is_kernel()
before checking base_type(). A scalar register stored into a kptr
slot has no btf, so the btf_is_kernel(reg->btf) call dereferences
NULL.
Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf
access. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg
In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already
set by another thread, __nfs4_file_get_access should not be called
to increment the nfs4_file access count since that was already done
by the thread that added READ access to the file. The extra fi_access
count in nfs4_file can prevent the corresponding nfsd_file from being
freed.
When stopping nfs-server service, these extra access counts trigger a
BUG in kmem_cache_destroy() that shows nfsd_file object remaining on
__kmem_cache_shutdown.
This problem can be reproduced by running the Git project's test
suite over NFS. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir
In tcf_blockcast_redir(), when iterating block ports to redirect
packets to multiple devices, the mac_header_xmit flag is queried
from the wrong device. The loop sends to dev_prev but queries
dev_is_mac_header_xmit(dev) — which is the NEXT device in the
iteration, not the one being sent to.
This causes tcf_mirred_to_dev() to make incorrect decisions about
whether to push or pull the MAC header. When the block contains
mixed device types (e.g., an ethernet veth and a tunnel device),
intermediate devices get the wrong mac_header_xmit flag, leading to
skb header corruption. In the worst case, skb_push_rcsum with an
incorrect mac_len can exhaust headroom and panic.
The last device in the loop is handled correctly (line 365-366 uses
dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste
oversight for the intermediate devices.
Fix by using dev_prev instead of dev for the mac_header_xmit query,
consistent with the device actually being sent to. |
