| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range()
aie2_populate_range() jumps back to the again label without calling
mmput(mm), leaking a reference to the mm_struct.
Add the missing mmput() before jumping to again. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix lock leak on ENOMEM in AMDGPU_GEM_OP_GET_MAPPING_INFO
The AMDGPU_GEM_OP_GET_MAPPING_INFO branch of amdgpu_gem_op_ioctl()
holds three cleanup-tracked resources before calling kvcalloc():
the drm_gem_object reference from drm_gem_object_lookup(), the
drm_exec lock on the looked-up GEM via drm_exec_lock_obj(), and
the drm_exec lock on the per-process VM root page directory via
amdgpu_vm_lock_pd(). All three are released by the out_exec
label that every other error path in this function jumps to.
The kvcalloc() failure path returns -ENOMEM directly, skipping
out_exec and leaking all three.
The leaked per-process VM root PD dma_resv lock is the
load-bearing leak: any subsequent operation on the same VM
(further GEM ops, command-submission, eviction, TTM shrinker
callbacks) blocks on the held lock. DRM_IOCTL_AMDGPU_GEM_OP is
DRM_AUTH | DRM_RENDER_ALLOW, so this is an unprivileged-local
denial of service against the caller's GPU context, reachable
by any process with /dev/dri/renderD* access.
Route the failure through out_exec so drm_exec_fini() and
drm_gem_object_put() run.
Reproduced on stock 7.0.0-10, Ryzen 7 5700U / Radeon Vega
(Lucienne): the failing ioctl returns -ENOMEM and a second
GET_MAPPING_INFO on the same fd then blocks in
drm_exec_lock_obj() on the leaked dma_resv. SIGKILL on the
caller does not reap the task; the fd-release path during
process exit goes through amdgpu_gem_object_close() ->
drm_exec_prepare_obj() on the same lock, leaving the task in D
state until the box is rebooted. The patched kernel was not
rebuilt and re-tested on this hardware; the fix is mechanical.
Tested on a single Lucienne / Vega box only.
Ziyi Guo posted an independent INT_MAX-bound check for
args->num_entries in the same branch [1]; the two patches are
complementary and can land in either order.
(cherry picked from commit b69d3256d79de15f54c322986ff4da68f1d65b0a) |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix memory corruption with small endpoint
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mxuport: fix memory corruption with small endpoint
Make sure that the bulk-out endpoint max packet size is at least eight
bytes to avoid user-controlled slab corruption should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: keyspan: fix missing indat transfer sanity check
Add the missing sanity check on the size of usa49wg indat transfers to
avoid parsing stale or uninitialised slab data. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix memory corruption with small endpoints
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected. |
| In zenml-io/zenml version 0.94.2, the `GET /api/v1/stack-deployment/stack` endpoint (`get_deployed_stack`) lacks proper RBAC authorization checks, allowing any authenticated user to enumerate all deployed stacks across all users and tenants. This includes stack component details, service connector information, and user IDs of stack owners. The vulnerability arises from two issues: missing endpoint-level RBAC checks and the use of a server-side `Client()` that bypasses the RBAC enforcement layer by directly accessing the database through `SqlZenStore`. This exposes sensitive information such as infrastructure topology, service connector details, stack ownership, and deployment metadata, potentially enabling cross-tenant reconnaissance and further attacks in multi-tenant ZenML Pro/Cloud deployments. |
| FileBrowser Quantum is a free, self-hosted, web-based file manager. Versions prior to 1.3.2-stable and 1.4.1-beta may leak some sensitive info, such as source and path. Versions 1.3.2-stable and 1.4.1-beta fix the issue. No known workarounds are available. |
| A flaw was found in libssh. Logic errors in automatic certificate-based public key authentication can cause libssh clients to loop indefinitely when configured certificates are missing or repeatedly rejected by a server, leading to denial of service. |
| Directus is a real-time API and App dashboard for managing SQL database content. Prior to 12.0.0, the SSRF protection on Directus's file-import-from-URL feature can be bypassed using the address 0.0.0.0 because api/src/request/is-denied-ip.ts treats 0.0.0.0 as a keyword for local interfaces but never blocks the literal address itself. On Linux and macOS, connecting to 0.0.0.0 reaches localhost, so an authenticated user with file-upload rights can make the server fetch internal services through the /files/import endpoint and retrieve the response as a downloadable file. This issue is fixed in version 12.0.0. |
| AgenticMail gives AI agents real email addresses and phone numbers. @agenticmail/api prior to version 0.9.32 and @agenticmail/core prior to version 0.9.10 had weakness related to validation and and binding of inactive-agent hour filtering; storage SQL identifier validation; metadata-backed ownership checks for raw storage SQL; blocking direct storage metadata access through raw SQL; fail-closed outbound worker secret handling; SMTP envelope/header control-character validation before command construction; and TLS certificate verification as the default for MailSender with an explicit opt-out for local development. @agenticmail/api prior to version 0.9.32 and @agenticmail/core prior to version 0.9.10 are patched. |
| A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection. |
| Cursor is a code editor built for programming with AI. Prior to the Cloud Agent fix on 03/31/2026, browser-enabled Cursor Cloud Agent sessions allowed attacker-controlled web content to connect from inside the agent container to an unauthenticated local agent endpoint, enabling code execution within the affected Cloud Agent sandbox or session and access to files, repository contents, environment variables, credentials, and GitHub App access tokens available to that session. This issue was fixed on 03/31/2026 by requiring authentication for the relevant agent endpoint. |
| A local privilege escalation vulnerability exists in snap-confine, a set-capabilities core component used internally by Canonical snapd to construct the secure execution environment for snap applications. This vulnerability uniquely affects versions of snap-confine configured with set-capabilities (rather than standard set-uid-root installations).
Due to a flaw in how privilege boundaries or security sandboxes are initialized when the binary runs under limited ambient capabilities, a local, unprivileged attacker can exploit this behavior to bypass intended restrictions and execute arbitrary code. Successful exploitation allows the local user to elevate their privileges to full root authority. |
| A sandbox confinement bypass vulnerability exists in Canonical snapd within its internal execution environment compiler (snap-confine). The default seccomp security templates generated by the engine to restrict system calls do not filter or reject process operations capable of creating or manipulating file execution flags with set-user-ID attributes. Consequently, an application running within a strictly confined snap environment can successfully compile or drop binaries and apply setuid properties to them. If a compromised or malicious process inside the snap sandbox executes these generated setuid binaries, it can potentially circumvent architectural sandboxing assumptions, drop intended restriction policies, or execute privileged actions inside the container namespace that should otherwise be strictly blocked. The vulnerability has been resolved by hardening the seccomp template engine to block the execution and creation of setuid executables by sandboxed snap processes. |
| An access control bypass and information disclosure vulnerability exists in the base AppArmor security profile configuration of Canonical snapd. The abstraction rules located in /etc/apparmor.d/abstractions/nss-systemd (inherited via ) inadvertently permit strictly confined snap applications, which lack the privileged account-control interface, to interact directly with the io.systemd.Multiplexer and io.systemd.NameServiceSwitch UNIX domain sockets under /run/systemd/userdb/.
On systems where the systemd-userdbd service is installed and operational, the service fails to distinguish between an unconfined root user on the host system and a restricted root user running within a snap application's sandbox (such as a daemon or configuration hook). Because systemd-userdbd returns "complete" user records—including sensitive hashed user passwords from /etc/shadow—when queried by a process running as root, a compromised or malicious strictly confined snap executing code as root can successfully query the Varlink interface to retrieve all system password hashes, bypassing intended snap sandbox restrictions. This issue is mitigated by the fact that systemd-userdbd is not installed by default on standard Ubuntu deployments. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: copy only received bytes on short ep0 read
ffs_ep0_read() allocates its control-OUT data buffer with
kmalloc() (not kzalloc) at the Length value from the Setup
packet, then copies that full len to userspace regardless of
how many bytes were actually received:
data = kmalloc(len, GFP_KERNEL);
...
ret = __ffs_ep0_queue_wait(ffs, data, len);
if ((ret > 0) && (copy_to_user(buf, data, len)))
ret = -EFAULT;
__ffs_ep0_queue_wait() returns req->actual, which on a short
control OUT transfer is strictly less than len. The
copy_to_user() call still copies len bytes, so on a short OUT
the last (len - ret) bytes of the kmalloc() buffer --
uninitialised slab residue -- are delivered to the FunctionFS
daemon.
Short ep0 OUT completions are specified USB control-transfer
behavior and are produced by in-tree UDCs:
* dwc2 continues on req->actual < req->length for ep0 DATA OUT
(short-not-ok is the only ep0-OUT stall path).
* aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket.
* renesas_usbf logs "ep0 short packet" and completes the
request.
* dwc3 stalls on short IN but not on short OUT.
A short ep0 OUT is therefore not evidence of a broken UDC; it is
a normal condition f_fs has to cope with. The sibling gadgetfs
implementation in drivers/usb/gadget/legacy/inode.c already does
this correctly via min(len, dev->req->actual) before
copy_to_user(). This patch brings f_fs.c to the same safe
pattern rather than trimming at a defensive layer.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace. Linux host stacks
normally reject short-wLength control OUTs before they reach
the gadget, so reproducing this required a build that
bypasses that host-side check. With the bypass in place, a
1-byte payload on a 64-byte Setup produces 63 bytes of
non-canary slab residue in the daemon's read buffer.
Fix by copying only ret (actually received) bytes to
userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values. |
| A vulnerability was identified in SourceCodester Class and Exam Timetabling System 1.0. Affected by this issue is some unknown functionality of the file /schoolyr.php. The manipulation of the argument sy leads to cross site scripting. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| A flaw was found in Red Hat Quay's Proxy Cache configuration feature. When an organization administrator configures an upstream registry for proxy caching, Quay makes a network connection to the specified registry hostname without verifying that it points to a legitimate external service. An attacker with organization administrator privileges could supply a crafted hostname to force the Quay server to make requests to internal network services, cloud infrastructure endpoints, or other resources that should not be accessible from the Quay application. |
