| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A buffer overflow vulnerability exists in the SNMP service of the Ethernet Remote I/Os products. An unauthenticated remote attacker could exploit improper handling of specially crafted SNMP requests, potentially leading to a denial-of-service condition on the affected device. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in benoitc hackney allows Excessive Allocation.
The Alt-Svc response header parser in src/hackney_altsvc.erl does not guarantee forward progress. When parse_token/2 receives a non-token, non-whitespace, non-comma byte (e.g. !, @, =, ;), it returns the input unchanged. skip_comma/1 also returns the buffer unchanged when the first byte is not a comma. parse_entries/2 then recurses with identical data, creating a tight infinite tail-recursive loop that pins a scheduler at 100% CPU. The calling process never returns.
The entry point parse_and_cache/3 is called synchronously in the connection process on every HTTP response. A single-byte Alt-Svc: ! response header is sufficient to trigger the hang; the header is fully controlled by any HTTP origin the client connects to.
This issue affects hackney: from 2.0.0-beta.1 before 4.0.1. |
| A flaw was found in Vim's netrw plugin. A crafted filename containing quote characters and expression fragments can break out of the quoted context during mark/unmark operations, allowing arbitrary Vimscript execution. This can be leveraged to run shell commands with the privileges of the user running Vim. |
| Unexpected Status Code or Return Value vulnerability in ninenines gun (gun_http module) allows a malicious HTTP server to force the client into raw protocol mode via an unsolicited 101 Switching Protocols response.
In gun_http:handle_inform/8, when a 101 Switching Protocols response is received over HTTP/1.1, the function verifies only that the Upgrade header is syntactically valid and that the stream reference is a plain reference(). It does not check whether the client ever sent an Upgrade or Connection: upgrade header on the corresponding request. Because this check is absent, any 101 response (solicited or not) causes gun to dispatch a gun_upgrade message to the caller and transition the entire connection to raw protocol mode.
A malicious or compromised HTTP server can send an unsolicited 101 response to any HTTP/1.1 request, causing the gun client to abandon HTTP framing for that connection. Once in raw mode, gun_raw applies no flow control (flow=infinity) and re-arms socket active mode after every received packet, so the server can flood the client with arbitrary bytes. These are forwarded as unbounded gun_data messages to the owner process, exhausting its mailbox and BEAM memory, ultimately crashing the VM.
This issue affects gun: from 2.0.0-pre.1 before 2.4.0. |
| A flaw was found in cifs-utils. This flaw allows an unprivileged local user to achieve privilege escalation. When a privileged service mounts a Common Internet File System (CIFS) share using a user-controlled credentials file, input values are not properly sanitized before being assembled into mount options. A local attacker can exploit this vulnerability to inject unauthorized mount options, allowing them to bypass permission checks and execute files with administrative (root) privileges. |
| Uncontrolled Resource Consumption vulnerability in ninenines gun (gun_http module) allows a malicious server to exhaust client memory via unbounded HTTP/1.1 response buffering.
In gun_http:handle/5, three clauses accumulate incoming TCP data into the connection's buffer field using binary concatenation with no upper-bound check: the head clause appends data until the \r\n\r\n header terminator is found; the body_chunked clause appends data whenever cow_http_te:stream_chunked/2 returns a more result indicating an incomplete chunk boundary; and the body_trailer clause appends data until the trailing \r\n\r\n is found. In each case, when the expected terminator never arrives, the enlarged binary is stored back into state and the process waits for more data, with no configurable or hard-coded ceiling on buffer size.
A malicious or compromised server can exploit this by sending a partial response that never completes. For example, a response may begin with HTTP/1.1 200 OK\r\nX-Pad: followed by an unbounded stream of arbitrary bytes, never sending the header terminator. The gun connection process will continuously append the incoming data to its buffer, causing unbounded heap growth. Because BEAM imposes no per-process heap limit by default, a single malicious connection can exhaust all available memory on the node, causing a node-wide out-of-memory crash.
This issue affects gun: from 1.0.0-pre.1 before 2.4.0. |
| Origin Validation Error vulnerability in ninenines gun (gun_http2 module) allows cross-origin cookie injection via unvalidated HTTP/2 PUSH_PROMISE authority.
In gun_http2:push_promise_frame/7, the :authority pseudo-header from an incoming PUSH_PROMISE frame is stored verbatim into the promised stream record without checking that it matches the connection's origin. When gun_http2:headers_frame/9 later processes the response headers for the promised stream, it calls gun_cookies:set_cookie_header/7 with the unvalidated server-supplied authority before any status branching and before user code can act. This violates RFC 7540 §10.6 / RFC 9113 §8.4, which require receivers to treat as a protocol error any push for a resource the server is not authoritative for.
A malicious or compromised HTTP/2 server can plant cookies scoped to arbitrary third-party domains into the client's shared cookie store. This enables session fixation attacks against those domains and, if the planted cookie overrides a legitimate session token, may result in account takeover. No user interaction beyond making a normal HTTP/2 request to the attacker-controlled server is required.
This issue affects gun: from 2.0.0-pre.2 before 2.4.0. |
| A flaw was found in Red Hat Ansible Automation Platform's automation-
controller. Four debug views that trigger the internal task, dependency, and
workflow schedulers are configured to allow any user (including unauthenticated
clients) and are routed in production builds because their URL include is not
gated on the debug setting. An unauthenticated remote attacker can repeatedly
invoke these endpoints to acquire the cluster-wide scheduler advisory lock;
because the legitimate scheduler acquires the same lock without waiting, the
attacker causes real scheduler runs to be skipped, stalling job dispatch for
all tenants, while also consuming controller web workers. The debug root view
additionally discloses the list of debug endpoints to unauthenticated callers. |
| Allocation of Resources Without Limits or Throttling vulnerability in phenixdigital phoenix_storybook allows unauthenticated denial of service via atom table exhaustion. LiveView event handlers and request parameters of the storybook convert client-supplied strings to atoms. Atoms are never garbage-collected, so a client that sends enough unique strings fills the atom table, and the BEAM node terminates.
PhoenixStorybook.ExtraAssignsHelpers.handle_set_variation_assign/3 and handle_toggle_variation_assign/3 call String.to_atom/1 on parameter keys, attribute names, variation ids, and values of attributes declared as :atom or :boolean. PhoenixStorybook.Story.Playground.handle_event/3 and PhoenixStorybook.StoryLive do the same for tab names, theme names, and playground field names. Releases published as phx_live_storybook have the same calls in the PhxLiveStorybook namespace, at first in PhxLiveStorybook.EntryLive.
This issue affects phoenix_storybook: from 0.5.0 before 1.1.0; phx_live_storybook: from 0.2.0 onward. |
| A flaw has been found in H3C ICG2000 Unified Communication Gateway 2023. This issue affects some unknown processing of the file /wnm/check.j of the component Web Management Module. Executing a manipulation can lead to missing authentication. The attack may be performed from remote. The exploit has been published and may be used. Upgrading to version R9141PXX is capable of addressing this issue. It is recommended to upgrade the affected component. The vendor confirms: "We have confirmed this issue is a known issue and has been fixed in R9141PXX versions." |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: remove bogus context initialization in alloc_requests
alloc_requests() initializes usb9pfs->in_req->context to point at the
struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites
this with the real struct p9_req_t pointer before every transmit, and
usb9pfs_tx_complete() clears it back to NULL after each completion, so
in_req->context only ever holds a valid p9_req_t once a request has
actually been queued.
usb9pfs_clear_tx(), however, can run at any time (mount close, gadget
disable) independent of whether a request was ever queued. If it runs
before the first usb9pfs_transmit(), it reads the leftover sentinel
value, type-confuses the struct f_usb9pfs pointer as a struct
p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and
hands it to p9_client_cb(), which manipulates req->wq and req->refcount
at bogus offsets inside f_usb9pfs. This reliably corrupts memory or
panics whenever the transport is torn down before any 9p request has
been transmitted, e.g. mounting and immediately unmounting, or a cable
disconnect racing the very first request.
usb9pfs->out_req->context is set the same way but is never read by
this transport (usb9pfs_rx_complete() identifies the instance via
ep->driver_data instead), so it serves no purpose either.
Both endpoints' ->driver_data are already set to usb9pfs in
enable_endpoint(), which is what the completion handlers actually use
to recover the f_usb9pfs instance. Just drop the leftover
->context assignments; usb_ep_alloc_request()/alloc_ep_req() already
return zeroed requests, so in_req->context correctly starts out NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Publish the output fence outside of job_lock
job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe
lock under it creates an inversion. drm_syncobj_replace_fence() takes
drm_syncobj::lock, which other paths acquire with interrupts enabled. For
example, a thread interrupted while holding it blocks the handler on
job_lock, and the handler can only make progress once the submit path
releases job_lock, which it cannot do while waiting for drm_syncobj::lock.
This is reported by lockdep:
[ 188.139076] ========================================================
[ 188.139086] WARNING: possible irq lock inversion dependency detected
[ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C
[ 188.139108] --------------------------------------------------------
[ 188.139116] swapper/0/0 just changed the state of lock:
[ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4]
[ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past:
[ 188.139242] (&syncobj->lock){+.+.}-{3:3}
[ 188.139256] and interrupts could create inverse lock ordering between them.
[ 188.139267] other info that might help us debug this:
[ 188.139275] Possible interrupt unsafe locking scenario:
[ 188.139284] CPU0 CPU1
[ 188.139291] ---- ----
[ 188.139299] lock(&syncobj->lock);
[ 188.139312] local_irq_disable();
[ 188.139320] lock(&vc4->job_lock);
[ 188.139335] lock(&syncobj->lock);
[ 188.139350] <Interrupt>
[ 188.139358] lock(&vc4->job_lock);
[ 188.139372] *** DEADLOCK ***
Hand the fence over after job_lock is dropped. The job can complete and
drop exec->fence in that window, so take a reference first and publish
through the local pointer, as exec may already be gone. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Drop the BO reservations outside of job_lock
vc4_queue_submit() calls drm_exec_fini() with job_lock held and interrupts
disabled. Besides unlocking the reservations, drm_exec_fini() frees the
object array with kvfree(), which asks for preemptible task context or a
non-NMI interrupt, and may reach might_sleep() through vfree().
Considering that an array that exceeds a page can take the vmalloc
fallback, call drm_exec_fini() once job_lock is dropped. The reservations
are then held across the job kick, which is harmless as nothing in the
completion path takes a BO reservation.
Note that vc4_attach_fences() has to stay inside the critical section, as
it walks exec, which the job done worker is free to release as soon as
job_lock is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: ignore ROAM flag of received ADD changes
A received TT change (OGM diff or full table response) with the ROAM flag
but without DEL is handled by batadv_tt_global_add() like a ROAMING_ADV:
* a newly created global entry gets BATADV_TT_CLIENT_ROAM and is
therefore excluded from the global CRC. The sender has it in its local
CRC and the receiver has to request the full table again
* batadv_tt_global_purge_local() removes the local entry of the
receiver. The receiver's own client is considered as roamed to the sender
and frames for it are rerouted
The ROAM flag only has a meaning together with DEL. Drop it on reception to
keep it from populating the global table with a temporary ROAMING entry
which is not part of the CRC - and therefore causing a CRC mismatch. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/bugs: Select the BHI mitigation based on the attack vector properly
The BHI mitigation selection is inconsistent with the documentation
(attack_vector_controls.rst), which lists BHI under both the
user->kernel and guest->host attack vectors. bhi_select_mitigation()
only enables it when CPU_MITIGATE_GUEST_HOST is set; otherwise it
selects BHI_MITIGATION_OFF, even if CPU_MITIGATE_USER_KERNEL is set.
As a result, a kernel compiled with KVM disabled gets BHI automatically
disabled, since CPU_MITIGATE_GUEST_HOST defaults to off without KVM.
This is a bug, given that CPU_MITIGATE_USER_KERNEL still needs it: on
affected Intel CPUs these kernels lose BHI_DIS_S or the BHB clearing
loop by default. Booting with mitigations=auto,no_guest_host has the
same effect.
Select BHI_MITIGATION_ON whenever user->kernel is mitigated, and keep
BHI_MITIGATION_VMEXIT_ONLY for the guest->host-only case.
[ bp: Clarify commit title. ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: charge shared policy nodes
Any local user can bypass memory.max with mbind() on a tmpfs file, and
allocate unbounded kernel memory.
mbind() sets a NUMA memory policy for a range of a mapping. If the
mapping is of a shmem and friends, the kernel also stores the policy on
the inode, in a tree with one entry per range of the file.
Each mbind() on a single page of a mapping can add one shared policy node
(struct sp_node) and one struct mempolicy to that tree. They outlive the
mapping and stay around until the inode is destroyed. The tree is not
bounded by the file size, so the file can be empty.
Memory that user space can allocate must be charged to a memory cgroup. A
slab cache does that for all of its objects if it is created with
SLAB_ACCOUNT. numa_policy_init() creates the slab caches for both
structs without SLAB_ACCOUNT, so they are not charged to any cgroup.
Reproduced with mbind() on single pages of an empty tmpfs file, from a
cgroup with memory.max=8M: the global OOM killer killed tasks owned by
root, and the machine panicked.
Fix this by creating both caches with SLAB_ACCOUNT. This change implies
that mbind() can now fail when running into memcg limits. Further,
the policy_cache also serves task and VMA policies, so they are
similarly accounted now.
Note that per-file limits are not really helpful, as the user could
simply use many files; having limits per user is tricky as well.
Fix generated by an LLM and submitted by Chris Mason in private.
[ david: smaller description tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
tmpfs: keep the quota soft limits of an unused id
When the last reference to a dquot goes away, shmem_release_dquot()
stores its limits in the rb tree of the mount, unless
shmem_is_empty_dquot() says that there is nothing worth storing. That
function looks at the usage and at the two hard limits only.
So if the administrator sets nothing but soft limits for an id that owns
no file yet, the entry is thrown away as soon as the dquot that
Q_SETQUOTA used is released, and the id never gets to see a limit.
To fix it, compare the soft limits as well: an entry can be empty only if
both soft limits are zero as well, which is exactly what
shmem_acquire_dquot() sets for a new entry.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: slightly adjusted description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/truncate: look again if a folio left the mapping
invalidate_inode_pages2_range() skips a folio which no longer belongs to
the mapping by the time it has got the folio lock, on the assumption
that somebody else has removed it from the page cache. But the folio may
have been replaced, and then there is a new folio with the same data at
that index.
For most cases, like folio migration, that is impossible. However,
collapse_file() only checks the refcount of the old folios, under the
i_pages lock, and relies on their folio locks from there on. That works for
users which repeat the lookup when they find folio->mapping changed.
The following scenario is, however, possible:
CPU0 pwrite(O_DIRECT) CPU1 collapse_file()
kiocb_invalidate_pages()
read the folio (old data), lock it
refcount check
the write completes copy to new_folio
kiocb_invalidate_post_direct_write()
find_get_entries() -> old folio
xas_store(new_folio)
folio->mapping = NULL
folio_unlock(folio)
folio_lock()
folio->mapping != mapping
-> continue
In that scenario, the collapsed folio with the data from before the write
stays in the page cache after the write has returned.
This used to be impossible, as khugepaged only collapsed files that nobody
had open for writing.
Restart the lookup at that index, like shmem_undo_range() does. The same
problem seems to exist in truncate_inode_pages_range() as well when
truncate_inode_folio() fails, so handle it there as well, but slightly
differently: simply check once more through find_get_entries(). |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-vdpa: fix pinned page leak in vhost_vdpa_pa_map() error path
When pin_user_pages() or vhost_vdpa_map() fails, vhost_vdpa_pa_map()
is supposed to unpin the pages pinned after the last successfully
mapped chunk, i.e. the range [map_pfn, last_pfn]. The unpin is guarded
by nchunks, but nchunks is reset to 0 every time a chunk is mapped from
inside the current page list, so a failure after any such boundary
leaves that pending range pinned forever. With physically scattered
memory nearly every page list contains a boundary, so the leak happens
on practically every failed IOTLB update.
The pending range is non-empty exactly when a page has been pinned,
which last_pfn already tells us, so drop nchunks and test last_pfn. |
| In the Linux kernel, the following vulnerability has been resolved:
vringh: bound top-level re-entry into indirect tables
In __vringh_iov(), the F_INDIRECT branch descends into the indirect
table and continues before the descriptor accounting runs. A top-level
indirect descriptor is therefore never charged to count. If such a
descriptor sets NEXT to point back at itself, returning from the
indirect table resumes at the same top-level descriptor, which is again
not counted, so the walk never makes forward progress.
Because count stays flat and indirect_count is reset to 0 on every
return to the top-level table, neither bound in the loop check trips.
A guest can spin the vringh worker at 100% CPU inside __vringh_iov(),
an uninterruptible host DoS.
Move the descriptor accounting above the indirect switch so that a
top-level indirect descriptor is charged one top-level traversal step
before the walk descends into its table, bringing this re-entry under
the existing vrh->vring.num bound. Each top-level descriptor is still
charged at most one step and indirect_count still bounds a single
table, so legitimate chains (including the multiple-indirect case in
tools/virtio/vringh_test.c) stay within vring.num, while a cyclic
indirect descriptor is now rejected with -ELOOP. |