| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops
When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg,
the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the
destination register in the !fullsock / !locked_tcp_sock path.
Both macros borrow a temporary register to check is_fullsock /
is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the
ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with
a request_sock), dst_reg should be zeroed but is not, leaving the stale
ctx pointer:
- SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks
as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer,
leading to stack-out-of-bounds access in helpers like
bpf_skc_to_tcp6_sock().
- SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the
verifier believes is a SCALAR_VALUE, leaking a kernel pointer.
Fix both macros by:
- Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the
added instruction.
- Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register
restore in the !fullsock path, placed after the restore because
dst_reg == src_reg means we need src_reg intact to read ctx->temp. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.05.1, two concurrent token-exchange requests using the same OAuth authorization code could each mint a distinct valid (access_token, refresh_token) pair, breaking the single-use guarantee that PKCE relies on. This vulnerability is fixed in 2026.05.1. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.04.1, the refresh-token cookie was set with httpOnly: true but missing both the secure flag and the sameSite attribute. Over plain HTTP the cookie could be intercepted on the network; without sameSite, browsers attached it to cross-site POSTs, enabling CSRF against the token-refresh endpoint. This vulnerability is fixed in 2026.04.1. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
In __iommu_group_set_domain_internal(), concurrent domain attachments are
rejected when any device in the group is recovering. This is necessary to
fence concurrent attachments to a multi-device group where devices might
share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in
__iommu_group_set_domain_nofail().
Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such
as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should
not be rejected, as the domain would be freed anyway in these nofail paths
while group->domain is still pointing to it. So pci_dev_reset_iommu_done()
could trigger a UAF when re-attaching group->domain.
Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through
the group->recovery_cnt fence, so as to update the group->domain pointer.
Instead add a gdev->blocked check in the device iteration loop, to prevent
any concurrent per-device detachment. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: sev-guest: Do not use host-controlled page order in cleanup path
When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST),
get_ext_report() allocates a buffer to retrieve a certificate blob from the
host, keeping track of its size in report_req->certs_len.
However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating
an invalid buffer size, as well as the expected length of such buffer.
get_ext_report() subsequently updates report_req->certs_len with the
host-controlled value, and cleans up the buffer by computing a page order
from such value. This is incorrect, as the host-provided length may not
match the page order of the original allocation, potentially resulting
in corruption in the page allocator.
Fix this by using alloc_pages_exact() instead, and reusing @npages to
compute the size passed to free_pages_exact(). For consistency, also
use @npages to compute the size when allocating the pages, even though
this last change has no functional effect. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
The generic/642 test-case can reproduce the kernel crash:
[40243.605254] ------------[ cut here ]------------
[40243.605956] kernel BUG at fs/ceph/xattr.c:918!
[40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI
[40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full)
[40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[40243.611820] Workqueue: ceph-msgr ceph_con_workfn
[40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0
[40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc
[40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287
[40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000
[40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000
[40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000
[40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000
[40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd
[40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000
[40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0
[40243.627408] Call Trace:
[40243.627839] <TASK>
[40243.628188] __prep_cap+0x3fd/0x4a0
[40243.628789] ? do_raw_spin_unlock+0x4e/0xe0
[40243.629474] ceph_check_caps+0x46a/0xc80
[40243.630094] ? __lock_acquire+0x4a2/0x2650
[40243.630773] ? find_held_lock+0x31/0x90
[40243.631347] ? handle_cap_grant+0x79f/0x1060
[40243.632068] ? lock_release+0xd9/0x300
[40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340
[40243.633429] ? lock_release+0xd9/0x300
[40243.634052] handle_cap_grant+0xcf6/0x1060
[40243.634745] ceph_handle_caps+0x122b/0x2110
[40243.635415] mds_dispatch+0x5bd/0x2160
[40243.636034] ? ceph_con_process_message+0x65/0x190
[40243.636828] ? lock_release+0xd9/0x300
[40243.637431] ceph_con_process_message+0x7a/0x190
[40243.638184] ? kfree+0x311/0x4f0
[40243.638749] ? kfree+0x311/0x4f0
[40243.639268] process_message+0x16/0x1a0
[40243.639915] ? sg_free_table+0x39/0x90
[40243.640572] ceph_con_v2_try_read+0xf58/0x2120
[40243.641255] ? lock_acquire+0xc8/0x300
[40243.641863] ceph_con_workfn+0x151/0x820
[40243.642493] process_one_work+0x22f/0x630
[40243.643093] ? process_one_work+0x254/0x630
[40243.643770] worker_thread+0x1e2/0x400
[40243.644332] ? __pfx_worker_thread+0x10/0x10
[40243.645020] kthread+0x109/0x140
[40243.645560] ? __pfx_kthread+0x10/0x10
[40243.646125] ret_from_fork+0x3f8/0x480
[40243.646752] ? __pfx_kthread+0x10/0x10
[40243.647316] ? __pfx_kthread+0x10/0x10
[40243.647919] ret_from_fork_asm+0x1a/0x30
[40243.648556] </TASK>
[40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore
[40243.654766] ---[ end trace 0000000000000000 ]---
Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS
maximum xattr size") moved the required_blob_size computation to before
the __build_xattrs() call, introducing a race.
__build_xattrs() releases and reacquires i_ceph_lock during execution.
In that window, handle_cap_grant() may update i_xattrs.blob with a
newer MDS-provided blob and bump i_xattrs.version. When
__bui
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: PHC: Fix potential use-after-free in get_timestamp
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix potential NULL pointer deref in error path of ice_set_ringparam()
ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without
clearing ICE_TX_RING_FLAGS_TXTIME bit.
When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent
ice_setup_tx_ring() call fails, a NULL pointer dereference could happen
in the unwinding sequence:
ice_clean_tx_ring()
-> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set)
-> ice_free_tx_tstamp_ring()
-> ice_free_tstamp_ring()
-> tstamp_ring->desc (NULL deref)
Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue.
Note that this potential issue is found by manual code review.
Compile test only since unfortunately I don't have E830 devices. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix RCU stall in bpf_fd_array_map_clear()
Add a missing cond_resched() in bpf_fd_array_map_clear() loop.
For PROG_ARRAY maps with many entries this loop calls
prog_array_map_poke_run() per entry which can be expensive, and
without yielding this can cause RCU stalls under load:
rcu: Stack dump where RCU GP kthread last ran:
CPU: 0 UID: 0 PID: 30932 Comm: kworker/0:2 Not tainted 6.14.0-13195-g967e8def1100 #2 PREEMPT(undef)
Workqueue: events prog_array_map_clear_deferred
RIP: 0010:write_comp_data+0x38/0x90 kernel/kcov.c:246
Call Trace:
<TASK>
prog_array_map_poke_run+0x77/0x380 kernel/bpf/arraymap.c:1096
__fd_array_map_delete_elem+0x197/0x310 kernel/bpf/arraymap.c:925
bpf_fd_array_map_clear kernel/bpf/arraymap.c:1000 [inline]
prog_array_map_clear_deferred+0x119/0x1b0 kernel/bpf/arraymap.c:1141
process_one_work+0x898/0x19d0 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x770/0x10b0 kernel/workqueue.c:3400
kthread+0x465/0x880 kernel/kthread.c:464
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x19/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: return VMA snapshot from task_vma iterator
Holding the per-VMA lock across the BPF program body creates a lock
ordering problem when helpers acquire locks that depend on mmap_lock:
vm_lock -> i_rwsem -> mmap_lock -> vm_lock
Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then
drop the lock before returning. The BPF program accesses only the
snapshot.
The verifier only trusts vm_mm and vm_file pointers (see
BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference-
counted with get_file() under the lock and released via fput() on the
next iteration or in _destroy(). vm_mm is already correct because
lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers
are left as-is by memcpy() since the verifier treats them as untrusted. |
| A Stored Cross-Site Scripting (XSS) vulnerability exists in Frappe Framework version 17.0.0-dev due to unsafe evaluation of user-controlled data in the Number Card component. |
| jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.21.0 until 2.21.4 and 3.1.4, in BeanDeserializer._deserializeUsingPropertyBased, the active-view (@JsonView) filter was applied only to creator properties; the regular property-buffering branch performed no prop.visibleInView(activeView) check. A change making SetterlessProperty.isMerging() return true routed setterless Collection/Map properties through this unguarded path, so a setterless collection annotated with a restricted @JsonView is populated from attacker JSON even when the active view excludes it. This vulnerability is fixed in 2.21.4 and 3.1.4. |
| Warp is an agentic development environment. From 0.2025.08.06.08.12.stable_00 until 0.2026.05.06.15.42.stable_01, Warp contains a command injection in the prompt branch selector. A user who can publish a branch to a Git repository opened in Warp can cause a crafted branch name to be interpreted by the victim's shell if the victim selects that branch from the UI. This vulnerability is fixed in 0.2026.05.06.15.42.stable_01. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: require admin permission for dev-set and key-rotate
The dev-set and key-rotate netlink operations modify shared device
state (PSP version configuration and cryptographic key material,
respectively) but do not require CAP_NET_ADMIN. The only access
control is psp_dev_check_access() which merely verifies netns
membership. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Clear rel_deadline when initializing forked entities
A yield-triggered crash can happen when a newly forked sched_entity
enters the fair class with se->rel_deadline unexpectedly set.
The failing sequence is:
1. A task is forked while se->rel_deadline is still set.
2. __sched_fork() initializes vruntime, vlag and other sched_entity
state, but does not clear rel_deadline.
3. On the first enqueue, enqueue_entity() calls place_entity().
4. Because se->rel_deadline is set, place_entity() treats se->deadline
as a relative deadline and converts it to an absolute deadline by
adding the current vruntime.
5. However, the forked entity's deadline is not a valid inherited
relative deadline for this new scheduling instance, so the conversion
produces an abnormally large deadline.
6. If the task later calls sched_yield(), yield_task_fair() advances
se->vruntime to se->deadline.
7. The inflated vruntime is then used by the following enqueue path,
where the vruntime-derived key can overflow when multiplied by the
entity weight.
8. This corrupts cfs_rq->sum_w_vruntime, breaks EEVDF eligibility
calculation, and can eventually make all entities appear ineligible.
pick_next_entity() may then return NULL unexpectedly, leading to a
later NULL dereference.
A captured trace shows the effect clearly. Before yield, the entity's
vruntime was around:
9834017729983308
After yield_task_fair() executed:
se->vruntime = se->deadline
the vruntime jumped to:
19668035460670230
and the deadline was later advanced further to:
19668035463470230
This shows that the deadline had already become abnormally large before
yield_task_fair() copied it into vruntime.
rel_deadline is only meaningful when se->deadline really carries a
relative deadline that still needs to be placed against vruntime. A
freshly forked sched_entity should not inherit or retain this state.
Clear se->rel_deadline in __sched_fork(), together with the other
sched_entity runtime state, so that the first enqueue does not interpret
the new entity's deadline as a stale relative deadline. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix data loss caused by incorrect use of nat_entry flag
Data loss can occur when fsync is performed on a newly created file
(before any checkpoint has been written) concurrently with a checkpoint
operation. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_flush_nat_entries
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return false
SPO and lost 'file A'
f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC
flags for the nat_entry, but this does not mean that the checkpoint has
actually completed successfully. However, f2fs_need_inode_block_update()
checks these flags and incorrectly assumes that the checkpoint has
finished.
The root cause is that the semantics of IS_CHECKPOINTED and
HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully
completes.
This patch modifies f2fs_need_inode_block_update() to acquire the
sbi->node_write lock before reading the nat_entry flags, ensuring that
once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the
checkpoint operation has already completed. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc()
Fix inverted condition that skips frequency change trigger,
causing kernel panics during cpufreq scaling. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked()
When a compressed or sparse attribute has its clusters frame-aligned,
vcn is rounded down to the frame start using cmask, which can result
in vcn != vcn0. In this case, vcn and vcn0 may reside in different
attribute segments.
The code already handles the case where vcn is in a different segment
by loading its runs before allocation. However, it fails to load runs
for vcn0 when vcn0 resides in a different segment than vcn. This causes
run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was
never loaded into the in-memory run list, triggering the WARN_ON(1).
Fix this by adding a missing check for vcn0 after the existing vcn
segment check. If vcn0 falls outside the current segment range
[svcn, evcn1), find and load the attribute segment containing vcn0
before performing the run lookup.
The following scenario triggers the bug:
attr_data_get_block_locked()
vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment
load runs for vcn segment <- vcn0 segment not loaded!
attr_allocate_clusters() <- allocation succeeds
run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN
WARN_ON(1) <- bug fires here! |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: Fix error pointer dereference
The variable tps->partner is checked for an error pointer and then if it
is, it sends an error message but does not return and then immediately
dereferenced a few lines below:
tps->partner = typec_register_partner(tps->port, &desc);
if (IS_ERR(tps->partner))
dev_warn(tps->dev, "%s: failed to register partnet\n", __func__);
if (desc.identity) {
typec_partner_set_identity(tps->partner);
cd321x->cur_partner_identity = st.partner_identity;
}
Add early return and fix spelling mistake in error message.
Detected by Smatch:
drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error:
'tps->partner' dereferencing possible ERR_PTR() |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Validate node_id in arena_alloc_pages()
arena_alloc_pages() accepts a plain int node_id and forwards it through
the entire allocation chain without any bounds checking.
Validate node_id before passing it down the allocation chain in
arena_alloc_pages(). |
