Export limit exceeded: 409409 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36348 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53053 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix clone_alias() to use the original device's devid Currently clone_alias() assumes first argument (pdev) is always the original device pointer. This function is called by pci_for_each_dma_alias() which based on topology decides to send original or alias device details in first argument. This meant that the source devid used to look up and copy the DTE may be incorrect, leading to wrong or stale DTE entries being propagated to alias device. Fix this by passing the original pdev as the opaque data argument to both the direct clone_alias() call and pci_for_each_dma_alias(). Inside clone_alias(), retrieve the original device from data and compute devid from it. | ||||
| CVE-2026-53003 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: pppoe: drop PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the current PPPoE driver assumes an uncompressed (2-byte) protocol field. However, the generic PPP layer function ppp_input() is not aware of the negotiation result, and still accepts PFC frames. If a peer with a broken implementation or an attacker sends a frame with a compressed (1-byte) protocol field, the subsequent PPP payload is shifted by one byte. This causes the network header to be 4-byte misaligned, which may trigger unaligned access exceptions on some architectures. To reduce the attack surface, drop PPPoE PFC frames. Introduce ppp_skb_is_compressed_proto() helper function to be used in both ppp_generic.c and pppoe.c to avoid open-coding. | ||||
| CVE-2026-53235 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: add pskb_may_pull() to skb_gro_receive_list() skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without first ensuring the data is in the linear area via pskb_may_pull(). When the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in page fragments) while skb_gro_offset is non-zero (after IP+TCP header parsing). The skb_pull() then decrements skb->len by skb_gro_offset but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len) in __skb_pull(). The UDP fraglist GRO path already contains this guard at udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides centralized protection for all callers (TCP, UDP, and any future protocols), and ensures the precondition of skb_pull() is satisfied before it is called. On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the skb is not held as a new GRO head and is instead delivered through the normal receive path, matching the UDP handling. | ||||
| CVE-2026-53216 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: limit XDP frame size to the RX buffer mvpp2 has short and long BM pools, and short pool buffers can be smaller than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with PAGE_SIZE as frame size. XDP helpers use frame_sz to validate tail growth and to derive the hard end of the data area. Advertising PAGE_SIZE for short buffers can let bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting memory or later tripping skb tailroom checks. Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches the actual buffer backing the packet. | ||||
| CVE-2026-53215 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: refill RX buffers before XDP or skb use The RX error path returns the current descriptor buffer to the hardware BM pool. That is only valid while the driver still owns the buffer. mvpp2_rx_refill() can fail after the current buffer has been handed to XDP or attached to an skb. In those cases mvpp2_run_xdp() may have recycled, redirected, or queued the page for XDP_TX, and an skb free also retires the data buffer. Returning such a buffer to BM lets hardware DMA into memory that is no longer owned by the RX ring. Refill the BM pool before handing the current buffer to XDP or to the skb. If the allocation fails there, drop the packet and return the still-owned current buffer to BM, preserving the pool depth. Once the refill succeeds, later local drops retire/free the current buffer instead of returning it to BM. | ||||
| CVE-2026-53200 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix handling of XN[0] when !FEAT_XNX XN has already been extracted from its bitfield position so using FIELD_PREP() on the mask that clears XN[0] is completely broken, having the effect of unconditionally granting execute permissions... Fix the obvious mistake by manipulating the right bit. | ||||
| CVE-2026-53189 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: update file PMD counter before folio_put() __split_huge_pmd_locked() updates the file/shmem RSS counter after dropping the PMD mapping's folio reference. If folio_put() drops the last reference, mm_counter_file() can later read freed folio state via folio_test_swapbacked(). Move the counter update before folio_put(). | ||||
| CVE-2026-53174 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ovl: keep err zero after successful ovl_cache_get() ovl_iterate_merged() stores PTR_ERR(cache) in err before checking IS_ERR(cache). On success err holds the truncated cache pointer and can be returned as a bogus non-zero error. The syzbot reproducer reaches this through overlay-on-overlay readdir: getdents64 iterate_dir(outer overlay file) ovl_iterate_merged() ovl_cache_get() ovl_dir_read_merged() ovl_dir_read() iterate_dir(inner overlay file) ovl_iterate_merged() Only compute PTR_ERR(cache) on the error path. | ||||
| CVE-2026-53171 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix arithmetic issues in dma_length() dma_length() derives DMA region usage from command stream values and updates region_size[]: len = ((len + stride[0]) * size0 + stride[1]) * size1 region_size[region] = max(..., len + dma->offset) Several arithmetic issues can corrupt the derived region size: - signed stride values may underflow when added to len - intermediate multiplications may overflow - len + dma->offset may overflow during region_size updates - dma_length() error returns were not validated by the caller region_size[] is later used by ethosu_job.c to validate command stream accesses against GEM buffer sizes. Arithmetic wraparound can therefore under-report region usage and bypass the bounds validation. Fix by validating signed additions, using overflow helpers for multiplications and offset updates, and propagating dma_length() failures to the caller. | ||||
| CVE-2026-53162 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: memcg: use round-robin victim selection in refill_stock Harry Yoo reported that get_random_u32_below() is not safe to call in the nmi context and memcg charge draining can happen in nmi context. More specifically get_random_u32_below() is neither reentrant- nor NMI-safe: it acquires a per-cpu local_lock via local_lock_irqsave() on the batched_entropy_u32 state. An NMI that lands on a CPU mid-update of the ChaCha batch state and recurses into the random subsystem would corrupt that state. The memcg_stock local_trylock prevents re-entry on the percpu stock itself, but cannot protect an unrelated subsystem's per-cpu lock. Replace the random pick with a per-cpu round-robin counter stored in memcg_stock_pcp and serialized by the same local_trylock that already guards cached[] and nr_pages[]. No atomics, no random calls, no extra locks needed. | ||||
| CVE-2026-53110 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Zero-extend bpf prog return values and kfunc arguments s390x ABI requires callers to zero-extend unsigned arguments and sign-extend signed arguments, and callees to zero-extend unsigned return values and sign-extend signed return values. s390 BPF JIT currently implements only sign extension. Fix this omission and implement zero extension too. | ||||
| CVE-2026-53081 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars When regsafe() compares two scalar registers that both carry BPF_ADD_CONST, check_scalar_ids() maps their full compound id (aka base | BPF_ADD_CONST flag) as one idmap entry. However, it never verifies that the underlying base ids, that is, with the flag stripped are consistent with existing idmap mappings. This allows construction of two verifier states where the old state has R3 = R2 + 10 (both sharing base id A) while the current state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap creates two independent entries: A->B (for R2) and A|flag->C|flag (for R3), without catching that A->C conflicts with A->B. State pruning then incorrectly succeeds. Fix this by additionally verifying base ID mapping consistency whenever BPF_ADD_CONST is set: after mapping the compound ids, also invoke check_ids() on the base IDs (flag bits stripped). This ensures that if A was already mapped to B from comparing the source register, any ADD_CONST derivative must also derive from B, not an unrelated C. | ||||
| CVE-2026-53077 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: Restrict use of RDS/IB to the initial network namespace Prevent using RDS/IB in network namespaces other than the initial one. The existing RDS/IB code will not work properly in non-initial network namespaces. | ||||
| CVE-2026-53057 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Add IOTINVAL after updating DDT/PDT entries Add riscv_iommu_iodir_iotinval() to perform required TLB and context cache invalidations after updating DDT or PDT entries, as mandated by the RISC-V IOMMU specification (Section 6.3.1 and 6.3.2). | ||||
| CVE-2026-53045 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: memory: tegra124-emc: Fix dll_change check The code checking whether the specified memory timing enables DLL in the EMRS register was reversed. DLL is enabled if bit A0 is low. Fix the check. | ||||
| CVE-2026-53026 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already set by another thread, __nfs4_file_get_access should not be called to increment the nfs4_file access count since that was already done by the thread that added READ access to the file. The extra fi_access count in nfs4_file can prevent the corresponding nfsd_file from being freed. When stopping nfs-server service, these extra access counts trigger a BUG in kmem_cache_destroy() that shows nfsd_file object remaining on __kmem_cache_shutdown. This problem can be reproduced by running the Git project's test suite over NFS. | ||||
| CVE-2026-52987 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid double drm_exec_fini() in userq validate When new_addition is true, amdgpu_userq_vm_validate() calls drm_exec_fini(&exec) before iterating over the collected HMM ranges and calling amdgpu_ttm_tt_get_user_pages(). If amdgpu_ttm_tt_get_user_pages() fails in that path, the code jumps to unlock_all and calls drm_exec_fini(&exec) a second time on the same exec object. drm_exec_fini() is not idempotent: it frees exec->objects and may also drop exec->contended and finalize the ww acquire context. Route that error path directly to the range cleanup once exec has already been finalized. Issue found using a prototype static analysis tool and confirmed by code review. (cherry picked from commit 2802952e4a07306da6ebe813ff1acacc5691851a) | ||||
| CVE-2026-52983 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix BQL imbalance in TX path Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight packets are accounted only for the AIROHA_NUM_TX_RING netdev TX queues. The queue index is computed as: qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx) txq = netdev_get_tx_queue(dev, qid); However, airoha_qdma_tx_napi_poll() accounts completions across all netdev TX queues (num_tx_queues), leading to inconsistent BQL accounting. Also reset all netdev TX queues in the ndo_stop callback. | ||||
| CVE-2026-52959 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virt: sev-guest: Do not use host-controlled page order in cleanup path When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST), get_ext_report() allocates a buffer to retrieve a certificate blob from the host, keeping track of its size in report_req->certs_len. However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating an invalid buffer size, as well as the expected length of such buffer. get_ext_report() subsequently updates report_req->certs_len with the host-controlled value, and cleans up the buffer by computing a page order from such value. This is incorrect, as the host-provided length may not match the page order of the original allocation, potentially resulting in corruption in the page allocator. Fix this by using alloc_pages_exact() instead, and reusing @npages to compute the size passed to free_pages_exact(). For consistency, also use @npages to compute the size when allocating the pages, even though this last change has no functional effect. | ||||
| CVE-2026-52934 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tvlv: reject oversized TVLV packets batadv_tvlv_container_ogm_append() builds a TVLV packet section from the tvlv.container_list. The total size of this section is computed by batadv_tvlv_container_list_size(), which sums the sizes of all registered containers. The return type and accumulator in batadv_tvlv_container_list_size() were u16. If the accumulated size exceeds U16_MAX, the value wraps around, causing the subsequent allocation in batadv_tvlv_container_ogm_append() to be undersized. The memcpy-style copy that follows would then write beyond the end of the allocated buffer, corrupting kernel memory. Fix this by widening the return type of batadv_tvlv_container_list_size() to size_t. In batadv_tvlv_container_ogm_append(), check the computed length against U16_MAX before proceeding, and bail out as if the allocation had failed when the limit is exceeded. | ||||