| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in SSSD. The sss_nss_protocol_fill_initgr() function in the NSS responder pre-allocates reply space for all group entries but does not shrink the packet when groups are skipped, causing uninitialized heap bytes to be transmitted to the client. A local attacker can exploit this to disclose cached directory data and heap layout information from the sssd_nss process. |
| A security vulnerability has been detected in GL.iNet GL-MT3000 up to 4.4.5. Impacted is the function set_upgrade of the file /cgi-bin/glc of the component modem.so. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. |
| Origin validation error in Microsoft Edge (Chromium-based) allows an unauthorized attacker to perform tampering over a network. |
| Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| The Clearfy Cache WordPress plugin before 2.4.3 does not validate the redirect target in its Cyrlitera old-URL redirect handler, passing a decoded request URI to an unsafe redirect function, which allows unauthenticated attackers to redirect visitors to an arbitrary external URL when a non-default option is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: gate must_wait writability check on pte_present()
userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE
without taking the page table lock and then apply pte_write() /
huge_pte_write() to it. Those accessors decode bits from the present
encoding only; on a swap or migration entry they read the offset bits that
happen to share the same position and return an undefined result.
The intent of the check is "is this fault still WP-blocked?". A
non-marker swap entry means the page is in transit -- the userfault
context the original fault delivered against is no longer the same, and
the swap-in or migration completion path will re-deliver a fresh fault if
userspace still needs to handle it. Worst case under the current code the
garbage write bit says "wait", and the thread stays asleep until a
UFFDIO_WAKE that may never arrive.
Gate the writability check on pte_present() so the lockless re-check only
inspects present-PTE bits when the entry is actually present. The
non-present, non-marker case returns "don't wait" and lets the fault path
retry. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. It installs with default user credentials. The kbftp account has a password of getbxf, which is publicly known and documented. This allows remote attackers to trivially gain privileged access to the FTP service interface, which contains MySQL backups. Sensitive information is stored in the database, such as privileged credentials for other systems. |
| SQL injection vulnerability in Dede CMS v.5.7.118 allows a remote attacker to obtain sensitive information via the sqlquery parameter of the sys_sql_query.php component |
| Cross-site scripting (XSS) vulnerability in Modules/Docs/DocsController.php in Milk admin <=0.9.8 allows remote attackers to inject arbitrary web script or HTML via the action parameter in a crafted request |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache Thrift Python, Go, PHP and Java bindings.This issue affects Apache Thrift: before 0.24.0.
Users are recommended to upgrade to version 0.24.0, which fixes the issue. |
| Missing authorization in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| python-cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. Prior to 49.0.0, when resolving invalid certificate chains that include duplicate copies of self-signed certificates, the processing recursively invokes the same candidate, leading to an exponential blowup. Although the limitation that the chain depth cannot exceed a specified maximum depth prevents unbounded recursion and guarantees termination, an attacker-controlled certificate chain can lead the processing to easily take more than 5s to reject in testing. This amplification could form the basis for a resource exhaustion denial of service attack. The core issue arises in the recursive nature of build_chain_inner, which does not de-duplicate against previously analyzed candidates. As the correctness of validation is not affected, the integrity of a system cannot be compromised through this vector, only its availability. This issue is fixed in 49.0.0. |
| The Wired Impact Volunteer Management WordPress plugin before 2.8.2 does not have authorisation checks in one of its AJAX actions, and does not verify that the RSVP being removed belongs to the requesting user, allowing users with a role as low as Subscriber to remove arbitrary users' RSVPs from any volunteer opportunity. |
| Origin validation error in Microsoft Edge (Chromium-based) allows an unauthorized attacker to perform spoofing over a network. |
| Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/edid: fix OOB read in drm_parse_tiled_block()
drm_parse_tiled_block() casts the DisplayID block to a
struct displayid_tiled_block and reads the full fixed layout up to
tile->topology_id[7] without checking block->num_bytes. The DisplayID
iterator only validates the declared payload length, so a crafted EDID
can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or
DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at
the end of a DisplayID extension. The read then runs past the end of the
exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read.
Reject blocks shorter than the spec's 22-byte tiled payload before
reading the fixed struct, as drm_parse_vesa_mso_data() already does.
BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update
Read of size 2 at addr ffff888010077700 by task exploit/147
dump_stack_lvl (lib/dump_stack.c:94 ...)
print_report (mm/kasan/report.c:378 ...)
kasan_report (mm/kasan/report.c:595)
drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581)
bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574)
drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426)
status_store (drivers/gpu/drm/drm_sysfs.c:219)
...
vfs_write (fs/read_write.c:595 fs/read_write.c:688)
ksys_write (fs/read_write.c:740) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops()
kvm_hyp_handle_mops() resets the single-step state machine as part of
rewinding state for a MOPS exception by modifying vcpu_cpsr() and
writing the result directly into hardware.
In the case of nested virtualization, vcpu_cpsr() is a synthetic value
such that the rest of KVM can deal with vEL2 cleanly. That means the
value requires translation before being written into hardware, which is
unfortunately missing from the MOPS handler.
Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state
altogether, which will be resynchronized on the next 'full' exit back
to KVM. |
| A use after free issue was addressed with improved memory management. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause unexpected system termination or corrupt kernel memory. |
