| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Input Validation vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All.
An attacker that has access to publish or modify entries in LDAP that match the configured searchBase and searchFilter can instantiate denied transports inside the broker JVM. This can be used to fetch an attacker URL and spawn a second BrokerService inside the same JVM.
This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| The fix for CVE-2026-0672, which rejected control characters in http.cookies.Morsel, was incomplete. The Morsel.update(), |= operator, and unpickling paths were not patched, allowing control characters to bypass input validation. Additionally, BaseCookie.js_output() lacked the output validation applied to BaseCookie.output(). |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Limit XDomain response copy to actual frame size
tb_xdomain_copy() copies req->response_size bytes from the received
packet buffer regardless of the actual frame size. When a short
response arrives, this reads past the valid frame data in the DMA
pool buffer into stale contents from previous transactions.
Use the minimum of frame size and expected response size for the
copy length. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison
The local-vs-remote region comparison loop uses '<=' instead of '<',
causing it to read one entry past the valid range of qr_regions. The
other loops in the same function correctly use '<'.
Fix the loop condition to use '<' for consistency and correctness. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm can send user-level unscoped npm authentication credentials to a registry chosen by a repository-local .npmrc file. In the reproduced case, the user's npm config contains a default registry and an unscoped _authToken. The repository does not provide a token-bearing auth line. It only sets registry= to a different registry URL. During normal pnpm metadata/install workflows, pnpm binds the user-origin unscoped credential to the repository-selected registry and sends it as an Authorization header. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, pnpm and pacquet expanded ${ENV_VAR} placeholders from repository-controlled .npmrc and pnpm-workspace.yaml into registry request destinations and registry credentials. A malicious repository could cause dependency resolution to send victim environment secrets to an attacker-selected registry before lifecycle scripts run. This vulnerability is fixed in 10.34.2 and 11.5.3. |
| A critical remote code execution (RCE) vulnerability has been reported in PTC Windchill PDMlink and PTC FlexPLM. The vulnerability may be exploited through the deserialization of untrusted data. * This advisory also applies to all CPS versions
* The identified vulnerability also impacts Windchill and FlexPLM releases prior to 11.0 M030 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in get_manuf_info()
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a host
running this driver.
valid_csum() is called after read_rom() and also iterates
buffer[0..Size-1], compounding the out-of-bounds access.
Fix by rejecting descriptors with unexpected length before calling
read_rom().
[ johan: amend commit message; also check for short descriptors ] |
| Ghost is a Node.js content management system. From 5.46.1 until 6.21.2, the validation applied to filters on the public API endpoints could be partially bypassed, making it possible to reveal private fields via a brute force attack. If SQLite was used as the database password hashes were fully accessible. If MySQL was used as the database the password hashes' case (uppercase / lowercase) would have been lost, which would likely have rendered a further brute force attack on the discovered hashes fruitless. This vulnerability is fixed in 6.21.2. |
| Ghost is a Node.js content management system. From 5.18.0 until 6.21.1, a discrepancy in responses from the members signin endpoints made it possible for an unauthenticated attacker to determine whether a given email address belongs to a registered member of a Ghost site. This vulnerability is fixed in 6.21.1. |
| Mastodon is a free, open-source social network server based on ActivityPub. Prior to 4.5.10, 4.4.17, and 4.3.23, when using Ruby versions older than 3.4, PrivateAddressCheck.private_address? returns false for IPv4-mapped IPv6 addresses (::ffff:a.b.c.d) corresponding to some private IPv4 addresses, depending on Ruby version, this can include loopback, RFC1918 private networks, and link-local space. An attacker who controls DNS for any domain can publish an AAAA record with such a mapped address; any outbound HTTP fetch Mastodon performs against that hostname then opens a real TCP connection to the underlying IPv4 address, including 127.0.0.1 and cloud-metadata endpoints such as 169.254.169.254. This vulnerability is fixed in 4.5.10, 4.4.17, and 4.3.23. |
| Appsmith is a platform to build admin panels, internal tools, and dashboards. Prior to 1.99, the POST /api/v1/admin/send-test-email endpoint accepts attacker-controlled smtpHost and smtpPort values and establishes a raw JavaMail TCP connection without any IP validation. This completely bypasses WebClientUtils.IP_CHECK_FILTER, which only applies to Spring WebClient HTTP requests. Additionally, the raw MailException.getMessage() is returned verbatim in the API error response, enabling error-based internal port scanning and service banner enumeration. This vulnerability is fixed in 1.99. |
| NSD version 4.14.0 introduced a bug where a specially crafted APL RR, with an adflength larger than permitted for the address family will overwrite the stack when the zone is written to disk, with a maximum of 111 attacker controlled bytes. |
| Arbitrary File Read vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to read arbitrary files via the expression parameter due to insufficient input validation. |
| motionEye (mEye) is an online interface for motion software, a video surveillance program with motion detection. Versions prior to 0.44.0 create the configuration file /etc/motioneye/motion.conf with 644 permissions (-rw-r--r--), making it readable by any local user on the system. This file contains sensitive data including the admin password hash, which can be leveraged by other vulnerabilities to escalate privileges. Additionally, per-camera configuration files (camera-*.conf) are also created with the same 644 permissions, potentially exposing camera-specific credentials and settings. The exposed SHA1 admin password hash can be cracked offline to recover the plaintext password, used directly to forge authenticated admin API requests via the signature authentication weakness (GHSA-45h7-499j-7ww3), and chained with the OS command injection flaw (CVE-2025-60787) to escalate a local unprivileged user to the Motion daemon user (often root), enabling full system compromise. This issue has been fixed in version 0.44.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix vaddr leak when indirect CSD has zeroed workgroups
v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect
buffer and the workgroup buffer and is expected to release them before
returning. When any of the workgroup counts read from the buffer is zero,
the function bailed out early and skipped the cleanup, leaking the vaddr
mappings of both BOs.
Jump to the cleanup path instead of returning directly, so the mappings
are always dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: reject NPU_OP_RESIZE commands from userspace
NPU_OP_RESIZE is a U85-only command that the driver does not yet
implement. The existing WARN_ON(1) placeholder fires unconditionally
whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE,
causing unbounded kernel log spam.
If panic_on_warn is set the kernel panics, giving any unprivileged user
with access to the DRM device a trivial denial-of-service primitive.
Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl
rejects the command before it reaches hardware. |
| A flaw was found in the GIF parser of GdkPixbuf’s LZW decoder. When an invalid symbol is encountered during decompression, the decoder sets the reported output size to the full buffer length rather than the actual number of written bytes. This logic error results in uninitialized sections of the buffer being included in the output, potentially leaking arbitrary memory contents in the processed image. |
