| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: systemport: Fix buffer overflow in bcm_sysport_get_stats()
When running on SYSTEMPORT Lite, certain statistics are unsupported and
skipped during bcm_sysport_get_stats(). The variable 'j' tracks the
compacted index into the destination data buffer, whereas 'i' iterates
over all elements in bcm_sysport_gstrings_stats.
Because the buffer allocated by ethtool is sized only according to
bcm_sysport_get_sset_count(), storing values at data[i] instead of
data[j] writes past the allocated array bounds, leading to memory
corruption.
Fix this by writing to data[j] instead of data[i]. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: reclaim an empty proto on the error path
Two racing tc filter add requests on the same chain/prio of an
unlocked classifier both run change() on the shared proto and both
can fail: the winner's tcf_chain_tp_delete_empty() attempt gives up
because the loser's handle is still in the idr, and the loser's
error path drops only its own reference without a second reclamation
attempt. The empty proto stays linked in the chain, holding the
chain reference, a block reference and the classifier module
reference until the chain or block is torn down.
Reclaim the proto on the error path of any failed request that holds
a proto reference. The reclamation is emptiness-gated:
tcf_chain_tp_delete_empty() unlinks the proto only when
delete_empty() admits it is empty, so a live shared proto is never
unlinked. A proto the request created is reclaimed unconditionally -
it is the only owner, so marking it for deletion is safe even without
a delete_empty callback. Classifiers without one (the check marks the
proto unconditionally) are rtnl-serialized, so the raced window this
guard closes cannot arise for them.
This is a follow-up to commit d4e359b3608a ("net/sched: cls_api: fix
teardown of an adopted proto on insert-race loss"), which stopped the
loser of the insert race from unlinking the winner's live proto but
left the empty-proto residual in place.
Conditions to recreate:
- CONFIG_NET_CLS_FLOWER=y; veth pair
- tc qdisc add dev veth0 ingress
- two concurrent `tc filter add dev veth0 ingress protocol ip pref 1
flower skip_sw ... action drop` (both fail in fl_hw_replace_filter
after publishing their handle in the idr); repeat in a loop
- an empty flower tp stays linked after both requests fail; visible
as a bare `filter protocol ip pref 1 flower chain 0` header in
`tc filter show` with no filter entries
- CAP_NET_ADMIN (namespace-local via unshare -Urn suffices) |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: set RQF_USE_SCHED when the operation is known
The cached requests are allocated for one operation but can be handed
out for another. A passthrough command has RQF_USE_SCHED cleared, so
using those flags for a subsequent read/write bio will insert it into
the scheduler without ->prepare_request() and frees it without
->finish_request(). For kyber, this leaks the domain token acquired at
dispatch and stalls the queue.
Don't set RQF_USE_SCHED based on the first operation the batch happened
to be allocated for. Instead, set it after the request is claimed by an
operation. Introduce a helper function, blk_mq_rq_late_init() for this,
and absorb blk_mq_rq_time_init() since the two run together. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: prevent AP VLAN tx from other interfaces
Since the station lookup was factored out of ieee80211_build_hdr(),
ieee80211_lookup_ra_sta() uses sta_info_get_bss() for all AP and AP VLAN
frames, not only for control port frames. A unicast frame sent on one
interface thus matches a station of a different VLAN of the same BSS and
is transmitted to it.
Only match stations of the interface the frame is sent on, except for
control port frames, since those may be sent for VLAN stations directly
on the BSS interface. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: save IRQ state in blkg_tryget_closest()
bio_set_dev() associates the bio with a blkg through bio_associate_blkg().
If the blkg lookup misses, blkg_tryget_closest() takes q->queue_lock with
spin_lock_irq() and releases it with spin_unlock_irq(), which
unconditionally enables local interrupts.
Callers may call bio_set_dev() with interrupts already disabled, e.g.
dm-thin's pool_map() does so while holding pool->lock taken with
spin_lock_irq(). The nested spin_unlock_irq() then enables interrupts
while pool->lock is still held, so an I/O completion softirq can run on
the same CPU, re-acquire pool->lock (thin_endio(), or overwrite_endio()
-> complete_mapping_preparation()) and deadlock. lockdep reports this
as inconsistent SOFTIRQ-ON-W to IN-SOFTIRQ-W usage.
Commit 3a762de55b4e ("block: save irq state in blkg_lookup_create()")
fixed the same problem while the lock lived in blkg_lookup_create(), but
commit 9327a865e395 ("blk-cgroup: don't nest queue_lock under rcu in
blkg_lookup_create()") moved the locking into blkg_tryget_closest() and
reverted it to spin_lock_irq().
Save and restore the caller's IRQ state instead. |
| In the Linux kernel, the following vulnerability has been resolved:
of/overlay: only treat a positive changeset id as registered
of_overlay_fdt_apply() stores the idr_alloc() return value in
ovcs->id before checking it. On failure the stored id is negative,
free_overlay_changeset()'s "if (ovcs->id)" check passes, idr_remove()
is called with a negative id and list_del() runs on ovcs->ovcs_list,
which is not initialized until after the id allocation. An allocation
failure at that point dereferences NULL.
Make free_overlay_changeset() treat only a strict-positive id as
registered. The rest of the function already copes with a
partially-initialized ovcs, so the error path stays a plain
goto err_free_ovcs. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Skip disarmed probes when checking optkprobe overlap
On x86, an optkprobe at A replaces five bytes with a jump. If a disabled
probe B is at A+2, get_optimized_kprobe() stops at B when arming a new
probe C at A+4. It leaves A optimized:
A A+1 A+2 A+3 A+4
A's jump | e9 | d0 | d1 | d2 | d3 |
after C | e9 | d0 | d1 | d2 | cc |
The INT3 for C overwrites the last byte of A's jump displacement, so
execution can jump to the wrong address. B can have prepared optinsns
while disarmed, but has no jump to unoptimize.
Continue past disarmed and unprepared probes to find the active optimized
probe before arming a probe in its jump. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_micfil: balance mclk enable/disable
hw_params() enables mclk unconditionally and hw_free() disables it
unconditionally, but the PCM core does not guarantee 1:1 pairing:
hw_free() can run without hw_params(), and hw_params() can be called
multiple times from the SETUP state. This triggers an "already
disabled" WARN() in the first case and leaks an enable reference in
the second, leaving the clock ungateable.
Guard both sides with the existing mclk_flag, as fsl_sai.c does with
mclk_streams. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
Copy the content of a Periodic Advertisement Report to BASE only if
the service UUID is Basic Audio Announcement Service UUID. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-sprd: disable runtime PM on remove
sdhci_sprd_probe() enables runtime PM, while sdhci_sprd_remove() does
not perform the corresponding runtime PM cleanup.
The probe failure path disables runtime PM before disabling the clocks,
but the normal remove path directly disables clocks that are also
managed by the runtime PM callbacks. If the device is runtime
suspended, those clocks may already be disabled.
Resume the device before removal, disable runtime PM and drop the
temporary runtime PM reference before disabling the clocks.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderx: fix PTP device ref leak in nicvf_probe()
cavium_ptp_get() acquires a reference to the PTP PCI device
through pci_get_device(). If any initialization step fails
after cavium_ptp_get(), the PTP PCI device reference is leaked.
Add a common error path to release the PTP reference before
returning from probe failures. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: Fix unlocked list_del in drm_bridge_add()
When re-adding a bridge that was previously removed, drm_bridge_add()
drops it from bridge_lingering_list without holding bridge_lock.
Both bridge_list and bridge_lingering_list are protected by bridge_lock,
as they are concurrently modified by drm_bridge_remove() and
__drm_bridge_free(), and walked by the debugfs 'bridges' file. Running
the list_empty() test and the list_del_init() outside of the lock may
therefore corrupt either list.
Perform both under bridge_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check the mounts before reading their parents in pivot_root()
path_pivot_root() reads the parents of new_root and of the caller's root
and checks whether they are shared before it checks that either mount is
in the caller's mount namespace. Only namespace_sem is held. That's fine
for a mount that is in the caller's mount namespace.
But new_root can be a file descriptor to a mount that has been unmounted
and that only the file descriptor keeps alive. If that mount stayed
attached to its parent when it was unmounted nothing pins the parent for
it. The final mntput() of the parent unhooks the children under
mount_lock alone and frees the parent afterwards:
pivot_root() close(fd), last ref on the parent
------------ ---------------------------------
ex_parent = new_mnt->mnt_parent
mntput_no_expire_slowpath()
__umount_mnt(new_mnt)
cleanup_mnt()
call_rcu()
IS_MNT_SHARED(ex_parent)
BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840
Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157
path_pivot_root+0xf1a/0x1840
__x64_sys_pivot_root+0x165/0x190
The same goes for the caller's root via chroot(). Both outcomes of the
check end in EINVAL so nothing but the read itself goes wrong. It's the
same thing commit bb4609405752 ("statmount: read the parent of an
unmounted mount under mount_lock") fixed for statmount().
Check that both mounts are in the caller's namespace before their
parents are read. Every path returns EINVAL either way. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: look at the topmost mount for a mount namespace file
attach_recursive_mnt() preallocates a mountpoint for the root of the
topmost mount of the source so that a mount that already sits at the
destination can be put on top of the source or on top of one of its
propagated copies.
The copies are made without CL_COPY_MNT_NS_FILE so their chain of
overmounts is shorter than the source's. It ends below the first bind
mount of a mount namespace file. So while the loop walks up the chain of
the source it remembers the mountpoint of that mount in "shorter" and
the existing mount is put there for the copies.
But the loop ends at the topmost mount without ever looking at it. If
the topmost mount is the only mount namespace file in the chain
"shorter" stays NULL and mnt_change_mountpoint() attaches the existing
mount of the copy below the root of the mount namespace file. That's a
dentry of nsfs. No path walk in the copy's mount namespace ever gets
there. The mount is gone until its parent goes and the copy that took
its place can't be unmounted synchronously because it has a child:
S bind mount of a file
N bind mount of a mount namespace file on top of S
A shared mount, B a slave of A, Q mounted on B/file
move_mount(S, A/file)
cat B/file -> the content of S instead of Q
umount B/file -> EBUSY
Look at every mount of the chain including the topmost one. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check a submount for references right before unmounting it
shrink_submounts() and mark_mounts_for_expiry() first collect all the
mounts they are allowed to unmount and then unmount them.
Whether a mount is busy is decided by propagate_mount_busy() on the
tree. But unmounting the first mount changes the tree that the second
one propagates into. propagate_umount()
moves a surviving overmount off a copy it unmounts and mounts it where
the copy was mounted. If that's where the propagated copy of the second
victim is looked up the overmount becomes a candidate of the second
umount_tree(). It's childless and so trim_one() commits it without
looking at its reference count.
So a synchronous umount pulls out a busy mount that is in use somewhere
else and marks it MNT_SYNC_UMOUNT while it has users:
umount2(/tmp/plshrink/p1, 0) = 0 errno 0
cwd is (unreachable)
The same two umounts requested one after the other fail with EBUSY.
This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of
NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts
inherit the flag.
Check each mount right before it is unmounted under the same hold of
namespace_sem and mount_lock as the umount itself. Make sure that the
algorithm stays linear. |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: init_can_skb(): restore skb header initialization
Commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure")
removed the skb_reset_mac_header()/skb_reset_network_header()/
skb_reset_transport_header() calls from init_can_skb(). As a result, RX
skbs from alloc_can_skb() and friends again carry mac_header = 0xFFFF.
When such an skb reaches packet_rcv_spkt() (SOCK_PACKET), the push length
calculation overflows and triggers skb_under_panic -> kernel BUG -> full
machine panic.
The same issue was originally reported in 2014 on linux-can and fixed by
commit 969439016d2c ("can: add missing initialisations in CAN related
skbuffs"). packet_rcv_spkt() itself has never been hardened: only
packet_rcv() and tpacket_rcv() gained dev_has_header() checks in
commit d549699048b4 ("net/packet: fix packet receive on L3 devices
without visible hard header"). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler
A CPU going down has to empty its own rq. Its hotplug thread waits in
sched_cpu_wait_empty() until nothing else is left, and the only thing that
wakes it is balance_push(), which runs from __schedule() on the dying CPU
and pushes off the migratable tasks the CPU picks.
sched_ext breaks this. A task sitting on a user DSQ or held by the BPF
scheduler is still counted on its rq, but an inactive CPU no longer calls
ops.dispatch() and can't pull the task back. The dying CPU goes idle with
the task still counted, and one of two things happens:
- Another CPU consumes the task. The rq empties without a __schedule() on
the dying CPU, so the hotplug thread is never woken and cpu_down() hangs
holding cpu_hotplug_lock.
- The task is affine only to the dying CPU. Nothing can move it, and the
offline stalls until the watchdog ejects the BPF scheduler.
When the rq goes offline, re-enqueue every task on it that isn't already on
the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the
dying CPU itself picks the tasks and balance_push() pushes them off, the
same as for the other sched classes. From then on no sched_ext path on
another CPU can pull a task off the rq.
ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU
hotplug then waits for an RCU grace period before taking the rq offline. A
BPF-held task affine only to the dying CPU and preempted inside an RCU
read-side critical section would block that grace period, and the rq would
never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps
running until the rq goes offline. Only the dying CPU's own hotplug thread
clears the flag during teardown, and task_can_run_on_remote_rq() still keeps
other rqs' tasks off the CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix NULL pointer dereference when the 'R' flag is used
If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the
user activates the device in the 'R' mode, a crash in dm_integrity_resume
happens because the function attempts to read the journal containing the
bitmap.
This patch makes dm-integrity skip any writes to the device in
dm_integrity_resume if the device is activated in the 'R' mode. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: ltc3676: don't read the write-only HRST and CLIRQ registers
HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST
triggers a hard reset of the chip and writing CLIRQ clears the interrupt;
reading them returns nothing useful, and the read itself fires the command.
The result is that a plain register dump resets the board:
cat /sys/kernel/debug/regmap/2-003c/registers
walks every readable register, hits HRST, and the board reboots.
Split the callback back in two so HRST and CLIRQ stay writable but are no
longer readable. The readable range is left unchanged
(LTC3676_BUCK1 ... LTC3676_IRQSTAT). |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix soft lockup in the netlink flow dump
A production compute node carrying a few thousand datapath flows hit a
soft lockup inside a single netlink flow dump and panicked.
ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it
emits, and that releases stats->lock with spin_unlock_bh() once per
CPU that has touched the flow. Every release is a local_bh_enable(),
and each one runs the pending softirq backlog in the dumping thread's
own context.
The skb bounds the flows one callback emits, but not the softirq work
it absorbs. On a CPU that carries the box's packet load the backlog
refills as fast as it drains, so the dumping thread becomes that CPU's
softirq engine. It never sleeps and it has no reschedule point, so
under voluntary preemption nothing can take the CPU away from it:
neither the ksoftirqd the kernel woke to take the work over, nor the
stopper thread the softlockup detector dispatches to refresh its
timestamp.
Hold BH off across the whole callback instead, the way
ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop
draining softirqs. The loop already runs under rcu_read_lock() and
cannot sleep. What it gives up is preemption under CONFIG_PREEMPT,
since a BH-off region is not preemptible outside PREEMPT_RT. The
region stays short: the skb caps the flows one callback emits, and
empty buckets cost no skb space but are each visited once per dump, as
the cursor only moves forward. The table grows on insert and shrinks
only on flush, so the walk is bounded by the largest flow count the
datapath has held. The softirq backlog the callback used to absorb has
no bound at all. |
