| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| GitPython is a python library used to interact with Git repositories. From version 3.1.30 to before version 3.1.47, GitPython blocks dangerous Git options such as --upload-pack and --receive-pack by default, but the equivalent Python kwargs upload_pack and receive_pack bypass that check. If an application passes attacker-controlled kwargs into Repo.clone_from(), Remote.fetch(), Remote.pull(), or Remote.push(), this leads to arbitrary command execution even when allow_unsafe_options is left at its default value of False. This issue has been patched in version 3.1.47. |
| ParquetSharp is a .NET library for reading and writing Apache Parquet files. From version 18.1.0 to before version 23.0.0.1, DecimalConverter.ReadDecimal makes a stackalloc using what might be an attacker-supplied value. If an attacker declares a decimal column with some unreasonable width, this could lead to a stack overflow. In a service environment, this would potentially take down a service. This affects applications using ParquetSharp to read untrusted Parquet files in a network service. This issue has been patched in version 23.0.0.1. |
| A weakness has been identified in OSGeo gdal up to 3.13.0dev-4. The affected element is the function GDfieldinfo of the file frmts/hdf4/hdf-eos/GDapi.c. Executing a manipulation can lead to out-of-bounds read. The attack needs to be launched locally. The exploit has been made available to the public and could be used for attacks. Upgrading to version 3.13.0RC1 is sufficient to fix this issue. This patch is called a791f70f8eaec540974ec989ca6fb00266b7646c. The affected component should be upgraded. |
| In the Linux kernel, the following vulnerability has been resolved:
media: solo6x10: Check for out of bounds chip_id
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
[hverkuil: fix checkpatch warning for is_tw286x] |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix crash when moving to switchdev mode
When moving to switchdev mode when the device doesn't support IPsec,
we try to clean up the IPsec resources anyway which causes the crash
below, fix that by correctly checking for IPsec support before trying
to clean up its resources.
[27642.515799] WARNING: arch/x86/mm/fault.c:1276 at
do_user_addr_fault+0x18a/0x680, CPU#4: devlink/6490
[27642.517159] Modules linked in: xt_conntrack xt_MASQUERADE
ip6table_nat ip6table_filter ip6_tables iptable_nat nf_nat xt_addrtype
rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_fwctl nfnetlink
zram zsmalloc mlx5_ib fuse rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi
scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_core
ib_core
[27642.521358] CPU: 4 UID: 0 PID: 6490 Comm: devlink Not tainted
6.19.0-rc5_for_upstream_min_debug_2026_01_14_16_47 #1 NONE
[27642.522923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[27642.524528] RIP: 0010:do_user_addr_fault+0x18a/0x680
[27642.525362] Code: ff 0f 84 75 03 00 00 48 89 ee 4c 89 e7 e8 5e b9 22
00 49 89 c0 48 85 c0 0f 84 a8 02 00 00 f7 c3 60 80 00 00 74 22 31 c9 eb
ae <0f> 0b 48 83 c4 10 48 89 ea 48 89 de 4c 89 f7 5b 5d 41 5c 41 5d
41
[27642.528166] RSP: 0018:ffff88810770f6b8 EFLAGS: 00010046
[27642.529038] RAX: 0000000000000000 RBX: 0000000000000002 RCX:
ffff88810b980f00
[27642.530158] RDX: 00000000000000a0 RSI: 0000000000000002 RDI:
ffff88810770f728
[27642.531270] RBP: 00000000000000a0 R08: 0000000000000000 R09:
0000000000000000
[27642.532383] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff888103f3c4c0
[27642.533499] R13: 0000000000000000 R14: ffff88810770f728 R15:
0000000000000000
[27642.534614] FS: 00007f197c741740(0000) GS:ffff88856a94c000(0000)
knlGS:0000000000000000
[27642.535915] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[27642.536858] CR2: 00000000000000a0 CR3: 000000011334c003 CR4:
0000000000172eb0
[27642.537982] Call Trace:
[27642.538466] <TASK>
[27642.538907] exc_page_fault+0x76/0x140
[27642.539583] asm_exc_page_fault+0x22/0x30
[27642.540282] RIP: 0010:_raw_spin_lock_irqsave+0x10/0x30
[27642.541134] Code: 07 85 c0 75 11 ba ff 00 00 00 f0 0f b1 17 75 06 b8
01 00 00 00 c3 31 c0 c3 90 0f 1f 44 00 00 53 9c 5b fa 31 c0 ba 01 00 00
00 <f0> 0f b1 17 75 05 48 89 d8 5b c3 89 c6 e8 7e 02 00 00 48 89 d8
5b
[27642.543936] RSP: 0018:ffff88810770f7d8 EFLAGS: 00010046
[27642.544803] RAX: 0000000000000000 RBX: 0000000000000202 RCX:
ffff888113ad96d8
[27642.545916] RDX: 0000000000000001 RSI: ffff88810770f818 RDI:
00000000000000a0
[27642.547027] RBP: 0000000000000098 R08: 0000000000000400 R09:
ffff88810b980f00
[27642.548140] R10: 0000000000000001 R11: ffff888101845a80 R12:
00000000000000a8
[27642.549263] R13: ffffffffa02a9060 R14: 00000000000000a0 R15:
ffff8881130d8a40
[27642.550379] complete_all+0x20/0x90
[27642.551010] mlx5e_ipsec_disable_events+0xb6/0xf0 [mlx5_core]
[27642.552022] mlx5e_nic_disable+0x12d/0x220 [mlx5_core]
[27642.552929] mlx5e_detach_netdev+0x66/0xf0 [mlx5_core]
[27642.553822] mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core]
[27642.554821] mlx5e_vport_rep_load+0x419/0x590 [mlx5_core]
[27642.555757] ? xa_load+0x53/0x90
[27642.556361] __esw_offloads_load_rep+0x54/0x70 [mlx5_core]
[27642.557328] mlx5_esw_offloads_rep_load+0x45/0xd0 [mlx5_core]
[27642.558320] esw_offloads_enable+0xb4b/0xc90 [mlx5_core]
[27642.559247] mlx5_eswitch_enable_locked+0x34e/0x4f0 [mlx5_core]
[27642.560257] ? mlx5_rescan_drivers_locked+0x222/0x2d0 [mlx5_core]
[27642.561284] mlx5_devlink_eswitch_mode_set+0x5ac/0x9c0 [mlx5_core]
[27642.562334] ? devlink_rate_set_ops_supported+0x21/0x3a0
[27642.563220] devlink_nl_eswitch_set_doit+0x67/0xe0
[27642.564026] genl_family_rcv_msg_doit+0xe0/0x130
[27642.564816] genl_rcv_msg+0x183/0x290
[27642.565466] ? __devlink_nl_pre_doit.isra.0+0x160/0x160
[27642.566329] ? d
---truncated--- |
| Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322. |
| The "go bug" command writes to two files with predictable names in the system temporary directory (for example, "/tmp"). An attacker with access to the temporary directory can create a symlink in one of these names, causing "go bug" to overwrite the target of the symlink. |
| Improper neutralization of special elements in M365 Copilot allows an unauthorized attacker to disclose information over a network. |
| Improper input validation in Azure Managed Instance for Apache Cassandra allows an authorized attacker to execute code over a network. |
| Vvveb before 1.0.8.2 contains an information disclosure vulnerability in the cron controller that allows unauthenticated attackers to retrieve the application's secret cron key. Attackers can access the cron controller without authentication and retrieve the exposed secret key from the response, enabling them to trigger scheduled task execution outside of the intended schedule. |
| A security flaw has been discovered in gyoridavid short-video-maker up to 1.3.4. This affects an unknown part of the file src/server/routers/rest.ts of the component REST API. The manipulation of the argument req.params.tmpFile results in path traversal. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| SOPlanning 1.52.00 is vulnerable to Cross Site Scripting (XSS) via the groupe_id parameter to process/groupe_save.php. |
| Netgate pfSense CE 2.7.2 allows code execution by using the module installer with a backup file with a serialized PHP object containing the post_reboot_commands property. NOTE: the Supplier disputes this because this installer is only available to admins and they are intentionally allowed to execute PHP code. |
| Netgate pfSense CE 2.8.0 allows code execution in the XMLRPC API via pfsense.exec_php. NOTE: the Supplier disputes this because the API call is only available to admins and they are intentionally allowed to execute PHP code. |
| A vulnerability was found in Open5GS up to 2.7.7. This affects the function ogs_sbi_discovery_option_add_service_names in the library /lib/sbi/message.c of the component NSSF. The manipulation results in denial of service. The attack may be performed from remote. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was found in SourceCodester SUP Online Shopping 1.0. The affected element is an unknown function of the file /admin/viewmsg.php. Performing a manipulation of the argument msgid results in sql injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. In versions 3.8.15 and prior, Electerm's terminal hyperlink handler passes any URL clicked in the terminal directly to shell.openExternal without any protocol validation. An attacker who controls terminal output (e.g., via a malicious SSH server, compromised remote host, or malicious plugin rendering terminal content) can thus achieve arbitrary code execution or local file access on the victim's machine, requiring only that the victim clicks a displayed link. At time of publication, there are no publicly available patches. |
| wlc is a Weblate command-line client using Weblate's REST API. Prior to version 2.0.0, the HTML output format in wlc embeds API response data into HTML without escaping, allowing cross-site scripting when the output is rendered in a browser. This issue has been patched in version 2.0.0. |
| Kimai is an open-source time tracking application. Prior to version 2.54.0, the Team API endpoints use #[IsGranted('edit_team')] instead of #[IsGranted('edit', 'team')], causing Symfony TeamVoter to abstain from voting. This removes entity-level ownership checks on team operations, allowing any user with the edit_team permission to modify any team, not just teams they are authorized to manage. This issue has been patched in version 2.54.0. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From version 1.74.2 to before version 1.83.7, two endpoints used to preview an MCP server before saving it — POST /mcp-rest/test/connection and POST /mcp-rest/test/tools/list — accepted a full server configuration in the request body, including the command, args, and env fields used by the stdio transport. When called with a stdio configuration, the endpoints attempted to connect, which spawned the supplied command as a subprocess on the proxy host with the privileges of the proxy process. The endpoints were gated only by a valid proxy API key, with no role check. Any authenticated user — including holders of low-privilege internal-user keys — could therefore run arbitrary commands on the host. This issue has been patched in version 1.83.7. |
