| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Adobe Commerce versions 2.4.9-beta1, 2.4.8-p4, 2.4.7-p9, 2.4.6-p14, 2.4.5-p16, 2.4.4-p17 and earlier are affected by an Improper Authorization vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized write access. Exploitation of this issue requires user interaction in that a victim must visit a maliciously crafted URL or interact with a compromised web page. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_mass_storage: Fix potential integer overflow in check_command_size_in_blocks()
The `check_command_size_in_blocks()` function calculates the data size
in bytes by left shifting `common->data_size_from_cmnd` by the block
size (`common->curlun->blkbits`). However, it does not validate whether
this shift operation will cause an integer overflow.
Initially, the block size is set up in `fsg_lun_open()` , and the
`common->data_size_from_cmnd` is set up in `do_scsi_command()`. During
initialization, there is no integer overflow check for the interaction
between two variables.
So if a malicious USB host sends a SCSI READ or WRITE command
requesting a large amount of data (`common->data_size_from_cmnd`), the
left shift operation can wrap around. This results in a truncated data
size, which can bypass boundary checks and potentially lead to memory
corruption or out-of-bounds accesses.
Fix this by using the check_shl_overflow() macro to safely perform the
shift and catch any overflows. |
| Missing Authorization vulnerability in Drupal Date iCal allows Forceful Browsing.
This issue affects Date iCal: from 0.0.0 before 4.0.15. |
| A flaw was found in the libtiff library. A remote attacker could exploit a signed integer overflow vulnerability in the putcontig8bitYCbCr44tile function by providing a specially crafted TIFF file. This flaw can lead to an out-of-bounds heap write due to incorrect memory pointer calculations, potentially causing a denial of service (application crash) or arbitrary code execution. |
| A flaw was identified in the RAR5 archive decompression logic of the libarchive library, specifically within the archive_read_data() processing path. When a specially crafted RAR5 archive is processed, the decompression routine may enter a state where internal logic prevents forward progress. This condition results in an infinite loop that continuously consumes CPU resources. Because the archive passes checksum validation and appears structurally valid, affected applications cannot detect the issue before processing. This can allow attackers to cause persistent denial-of-service conditions in services that automatically process archives. |
| Adobe Commerce versions 2.4.9-beta1, 2.4.8-p4, 2.4.7-p9, 2.4.6-p14, 2.4.5-p16, 2.4.4-p17 and earlier are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a high-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field. Scope is changed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR
maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the
source operand is a constant. When dst has signed range [-1, 0], it
forks the verifier state: the pushed path gets dst = 0, the current
path gets dst = -1.
For BPF_AND this is correct: 0 & K == 0.
For BPF_OR this is wrong: 0 | K == K, not 0.
The pushed path therefore tracks dst as 0 when the runtime value is K,
producing an exploitable verifier/runtime divergence that allows
out-of-bounds map access.
Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to
push_stack(), so the pushed path re-executes the ALU instruction with
dst = 0 and naturally computes the correct result for any opcode. |
| The Photo Gallery, Sliders, Proofing and Themes – NextGEN Gallery plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to and including 4.2.0. This is due to insufficient object-level authorization in the image deletion REST flow where the permission callback for DELETE /imagely/v1/images/{id} only checks 'NextGEN Manage gallery' permissions and does not enforce gallery ownership or 'NextGEN Manage others gallery' permissions. This makes it possible for authenticated attackers, with Subscriber-level privileges and 'NextGEN Manage gallery' capability, to delete gallery images belonging to other users as well as their associated image files from disk when deleteImg is enabled (default). |
| Adobe Commerce versions 2.4.9-beta1, 2.4.8-p4, 2.4.7-p9, 2.4.6-p14, 2.4.5-p16, 2.4.4-p17 and earlier [NEEDS REVIEW: impact mismatch — ticket says 'Arbitrary file system write', CIA triad derives 'Security Feature Bypass'. Verify CVSS vector before publishing.] are affected by an Improper Input Validation vulnerability that could result in a Security feature bypass. A high-privileged attacker could leverage this vulnerability to bypass security measures and gain unauthorized write access. Exploitation of this issue requires user interaction in that a victim must visit a maliciously crafted URL or interact with a compromised web page. Scope is changed. |
| A session fixation vulnerability was found in Keycloak's login-actions endpoints. An unauthenticated attacker could exploit this flaw by pre-creating an authentication session and tricking a victim into visiting a maliciously crafted link. By leveraging the /login-actions/restart endpoint—which processes session handles without adequate CSRF protection or cookie ownership validation—an attacker can reset the authentication flow state. This causes Single Sign-On (SSO) to authenticate the victim transparently upon clicking the link, allowing the attacker to hijack the required-action form without needing the victim's credentials. A successful exploit could lead to complete account takeover, including highly privileged administrative accounts. |
| A flaw was found in Keycloak's URL validation logic during redirect operations. By crafting a malicious request, an attacker could bypass validation to redirect users to unauthorized URLs, potentially leading to the exposure of sensitive information within the domain or facilitating further attacks. This vulnerability specifically affects Keycloak clients configured with a wildcard (*) in the "Valid Redirect URIs" field and requires user interaction to be successfully exploited.
The issue stems from a discrepancy in how Keycloak and the underlying Java URI implementation handle the user-info component of a URL. If a malicious redirect URL is constructed using multiple @ characters in the user-info section, Java's URI parser fails to extract the user-info, leaving only the raw authority field. Consequently, Keycloak's validation check fails to detect the malformed user-info, falls back to a wildcard comparison, and incorrectly permits the malicious redirect. |
| A flaw was found in Keycloak. A remote, unauthenticated attacker can send a specially crafted XML input to the Security Assertion Markup Language (SAML) endpoint. This malicious input can cause high CPU usage and worker thread starvation, leading to a Denial of Service (DoS) where the server becomes unavailable. |
| Twig versions 2.16.x and 3.9.0 through 3.25.x contain a sandbox bypass vulnerability when using a SourcePolicyInterface that allows attackers with template rendering capabilities to pass arbitrary PHP callables to sort, filter, map, and reduce filters. Attackers can exploit the runtime check that fails to use the current template source to bypass sandbox restrictions and execute arbitrary code when the sandbox is enabled through a source policy rather than globally. |
| In OpenStack Ironic through 35.x before a3f6d73, during image handling, an infinite loop in checksum calculations can occur via the file:///dev/zero URL. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid overflows in ip6_datagram_send_ctl()
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1463-1465`:
- `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen +
opt->opt_nflen : 0) + ...;`
With wrapped `opt_flen`, `headersize`/headroom decisions underestimate
what will be pushed later.
4. When building the final skb, the actual push length comes from
`dst1opt` and is not limited by wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1930-1934`:
- `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);`
- In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes
`dst1opt` via `ipv6_push_exthdr()`.
- In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does:
- `skb_push(skb, ipv6_optlen(opt));`
- `memcpy(h, opt, ipv6_optlen(opt));`
With insufficient headroom, `skb_push()` underflows and triggers
`skb_under_panic()` -> `BUG()`:
- `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`)
- `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`)
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
-
---truncated--- |
| Camel-CXF and Camel-Knative Message Header Injection via Missing Inbound Filtering
The CXF and Knative HeaderFilterStrategy implementations (CxfRsHeaderFilterStrategy in camel-cxf-rest, CxfHeaderFilterStrategy in camel-cxf-transport, and KnativeHttpHeaderFilterStrategy in camel-knative-http) only filter outbound Camel-internal headers via setOutFilterStartsWith, while not configuring inbound filtering via setInFilterStartsWith. As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelExecCommandExecutable, CamelFileName) via HTTP requests to CXF-RS or CXF-SOAP endpoints. When a route forwards messages from these endpoints to header-driven components such as camel-exec or camel-file, the injected headers override configured values, enabling remote code execution or arbitrary file writes. This is the same pattern that was previously addressed in camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and non-HTTP strategies (CVE-2026-40453).
This issue affects Apache Camel: from 3.18.0 before 4.14.6, from 4.15.0 before 4.18.2.
Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.2. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. |
| OpenStack Ironic before 35.0.1 allows ipmitool execution in a non-default configuration that has a console interface. |
| API endpoints in LalanaChami Pharmacy Management System (commit 5c3d028) lack authentication middleware. Unauthenticated remote attackers can exploit this to dump all user records (including bcrypt password hashes) via /api/user/getUserData, modify drug inventory, and access private medical prescription data via /api/doctorOder. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user
After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in
hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to
conn->users. However, l2cap_register_user() and l2cap_unregister_user()
don't use conn->lock, creating a race condition where these functions can
access conn->users and conn->hchan concurrently with l2cap_conn_del().
This can lead to use-after-free and list corruption bugs, as reported
by syzbot.
Fix this by changing l2cap_register_user() and l2cap_unregister_user()
to use conn->lock instead of hci_dev_lock(), ensuring consistent locking
for the l2cap_conn structure. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: Fix possible UAF
This fixes the following trace caused by not dropping l2cap_conn
reference when user->remove callback is called:
[ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00
[ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 97.809947] Call Trace:
[ 97.809954] <TASK>
[ 97.809961] dump_stack_lvl (lib/dump_stack.c:122)
[ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798)
[ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1))
[ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341)
[ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2))
[ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360)
[ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285)
[ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5))
[ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716)
[ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691)
[ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678)
[ 97.810404] __fput (fs/file_table.c:470)
[ 97.810430] task_work_run (kernel/task_work.c:235)
[ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201)
[ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5))
[ 97.810527] do_exit (kernel/exit.c:972)
[ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810574] ? __pfx_do_exit (kernel/exit.c:897)
[ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 97.810721] do_group_exit (kernel/exit.c:1093)
[ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1))
[ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366)
[ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810826] ? vfs_read (fs/read_write.c:555)
[ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800)
[ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555)
[ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810960] arch_do_signal_or_restart (arch/
---truncated--- |
