| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unauthenticated Broken Access Control in Deposits and Partial Payments for WooCommerce <= 3.1.0 versions. |
| Issue summary: Receiving a DTLS record for a future epoch while a handshake
is in progress causes OpenSSL to buffer far more memory than the record
itself requires.
Impact summary: A peer can use a small amount of network traffic to make an
OpenSSL DTLS endpoint retain a disproportionately large amount of memory,
which may lead to a Denial of Service.
CWE: CWE-405: Asymmetric Resource Consumption (Amplification)
Description: While a DTLS handshake is in progress, a peer may legitimately
have already moved on to the next epoch (for example, having sent its
ChangeCipherSpec and Finished messages) before the local endpoint has
processed the same transition, typically because of reordering on the
underlying UDP transport. OpenSSL buffers such early records so that they
can be processed once the local endpoint catches up.
Buffering a record currently retains the entire read buffer it arrived in,
which is sized to hold the largest possible DTLS record (around 16
kilobytes), rather than just the bytes that make up the record itself. Up
to 100 such records may be buffered per connection. As a result, a peer
that sends a stream of small forged records claiming to belong to the next
epoch can cause an OpenSSL DTLS endpoint to retain around 1.7 megabytes of
memory, despite sending only a small fraction of that amount of data over
the network.
An attacker therefore gains a memory amplification factor of around 1200,
and can multiply the effect across as many associations as it is able to
open, making this a remote memory exhaustion Denial of Service risk for
DTLS servers. Since the memory retained per connection remains bounded,
and any limit an application already places on the number of concurrent
associations also bounds the total exposure, this issue has been assessed
as Low severity.
FIPS impact: no
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary.
OpenSSL 4.0, 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are vulnerable to this
issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.2.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.4.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.8.
OpenSSL 3.4 users should upgrade to OpenSSL 3.4.7.
OpenSSL 3.0 users should upgrade to OpenSSL 3.0.22.
Premium support customers only:
OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1zi
OpenSSL 1.0.2 users should upgrade to OpenSSL 1.0.2zr
This issue was reported on 18 May 2026 by Amazon Web Services.
The fix has been developed by Matt Caswell.
-- cut (non-publishing metadata for internal use) --
Reported by: Amazon Web Services
Fixed by: Matt Caswell |
| Issue summary: In a server or client configuration with RFC7250 Raw Public Keys (RPKs)
enabled, and only the private key (with no associated certificate) configured locally,
a NULL pointer dereference may occur when the remote peer solicits raw public keys and
also sends the typically omitted "signature_algorithms_cert" TLS extension.
Impact summary: The impact is limited to a possible Denial of Service as a result of
an application abort, no data disclosure or remote command execution are possible.
CWE: CWE-476: NULL Pointer Dereference
Description: While a passing comment in sample code in the documentation suggests
that key-only RPK configurations are supported, the best-practice RPK configuration
is to always configure a corresponding certificate (possibly self-signed or
signed by any convenient CA).
When the private key is configured along with a matching certificate, the
"signature_algorithms_cert" extension is handled reliably even without the
fix, and peer clients or servers that don't support raw public keys may be
able to complete a TLS connection by pinning or verifying the corresponding
certificate or its public key.
Deployments that prefer to configure just a private key with no certificate
need to upgrade to an updated release as noted below.
FIPS impact: no
No FIPS modules are affected by this issue, as the SSL protocol implementation
is outside the OpenSSL FIPS module boundary. |
| The Kirki – Freeform Page Builder, Website Builder & Customizer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘comment’ parameter in all versions up to, and including, 6.2.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In createSessionInternal of PackageInstallerService.java, there is a possible way to permanently DoS the device due to a logic error in the code. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In setClipboardAccessNotificationsEnabledForUser of ClipboardService.java, there is a possible mult-iuser isolation due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In writeToParcel of BleRssiRangingCapabilities.java, there is a possible way to obtain the Bluetooth MAC address due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In onCreate of ContactsPickerActivity.kt, there is a possible misleading UI due to a tapjacking/overlay attack. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In initForUserNoTracing of VoiceInteractionManagerService.java, there is a possible persistent denial of service due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of XmpDataParser.java, there is a possible improper data sanitization due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of rw_t3t.cc, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In updateInternal of MediaProvider.java, there is a possible expose contents of files due to a race condition. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In screenArgsForPermissionCheckIfAny of multiple locations there is a possible risk of unauthorized access due to a confused deputy. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In openFile of AppFuseBridge.java, there is a possible information disclosure due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible improper data sanitization due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip Update HDCP Config In Transition State
Transition state does not have a valid dm_stream_ctx that should skip
configuring HDCP routine. The routine is valid to go through only when
a valid stream is created. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: write-protect folios during data writeback
commit 095be159f3eb ("btrfs: unify folio dirty flag clearing") replaced
the folio_clear_dirty_for_io() call in extent_write_cache_pages() with a
plain folio_test_dirty() check. Besides clearing the dirty flag,
folio_clear_dirty_for_io() also calls folio_mkclean(), which write-protects
the shared mmap PTEs mapping the folio. Note that we still do call
folio_clear_dirty_for_io() later in submit_one_sector() when we clear
dirty on the last sector of the folio (the only sector for non-subpage
cases). But we lost this early call in extent_write_cache_pages().
Without the extra write-protection, a process with the file mmap-ed can
modify a sector while it is being used by writeback in a way that
expects a stable folio (checksumming, compressing, copying, etc...)
without faulting, which manifests as a handful of concrete bugs.
1. For large folios or subpage sectorsize, it is possible to submit a bio
which does not cover the whole folio. When this happens, we will have a
bio in flight for a folio that we have *not* called
folio_clear_dirty_for_io() on. If a task with an existing mmap-ed PTE
writes (without faulting..) in this window, it can result in
corruptions. If the write arrives while the checksumming or writing itself
is underway, this can result in an invalid checksum and later corruption
reports on read. If the write arrives after checksumming/writing is done
but before the last sector dirty is cleared, then the write is present
in page cache but doesn't affect the dirty tracking and will be lost
when the folio is fully finished being submitted and the dirty bit
is cleared. This results in losing the write even if fsync() is called.
2. For zoned submissions which are done in batch separate from the main
extent_writepage() loop, we also risk csum violations for those
submissions. Zoned writes are clamped to max_zone_append_size and are
not aligned with folios, so a submission can span two folios. The first
folio being processed in extent_write_cache_pages() will call
extent_write_locked_range() which will submit the partial range of the
next folio, while the rest of that folio could still be dirty. So
clearing dirty on the submitted sectors doesn't call
folio_clear_dirty_for_io() and we have the same issue. Since
extent_write_cache_pages() skips these batch submitted folios (they are
already marked for writeback from submission by the preceding folio), we
must add the extra write protection in lock_delalloc_folios().
3. For inline extents this will subtly risk losing writes that happen
after/while we copy the inline extent but before we clear dirty on
the folio.
4. For folios spanning EOF, mmap could tamper with the zeroed bytes past
EOF and cause them to be persisted where future faults would improperly
see them instead of zeros.
5. Finally, for compressed extents, we risk modifying the folios while we
work on compressing them which will result in corrupted compressed data.
Specifically, in run_delalloc_compressed() we queue up work to do
compress_file_range() in BTRFS_COMPRESSION_CHUNK_SIZE (512K) chunks which
will call btrfs_folio_clamp_clear_dirty() on the range. For non-subpage,
this will always clear the whole folio, safely. For subpage, we risk a
partial clear here as well. In particular, imagine a 2M folio broken up
into 512K chunks of work which might start compression work on one chunk
before all the chunks compress_file_range() workers have gotten far
enough to finish clearing all the dirty bitmaps of the folio and getting
to folio_clear_dirty_for_io(). Large folios on the edges of submission
ranges are similarly at risk to be only partly cleared.
This particular gap was introduced by a second patch in the same series:
commit a4ef54dbb576 ("btrfs: make extent_range_clear_dirty_for_io() to handle sector size < page size cases")
We cannot simply restore the call to folio_clear
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring buffer readers
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
When cpuhp_setup_state fails after pit_clockevent_per_cpu_init has
successfully called request_irq, the error handling jumps directly to
out_pit_clocksource_unregister without freeing the registered IRQ.
This leaks the IRQ line and, since kfree(pit) follows, leaves a
dangling pointer registered as the interrupt handler's dev_id,
potentially leading to a use-after-free if the IRQ fires afterwards.
Fix it by calling pit_clockevent_per_cpu_exit to properly release the
IRQ before falling through to the existing cleanup chain. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: fix user path of nested backing files
backing_file_open() derives the path to be stored in the new backing
file from user_file->f_path. This is incorrect when user_file itself
is a backing file, which is the case for nested stacking filesystems,
e.g. overlayfs mounts where the lowerdir of one overlayfs is the merged
directory of another. Since commit def3ae83da02 ("fs: store real path
instead of fake path in backing file f_path") the f_path of a backing
file holds the real path of the intermediate layer, not the path that
the user opened.
Commit 924577e4f6ca ("ovl: Fix nested backing file paths") fixed this
for such configurations by passing file_user_path() from
ovl_open_realfile(). However, commit 6af36aeb147a ("lsm: add
backing_file LSM hooks") changed the first argument of
backing_file_open() from the user path back to the user file and
derived the path from user_file->f_path again, silently re-introducing
the problem.
As a result, files mapped through a nested overlayfs show the wrong
path in /proc/<pid>/maps and in perf/ftrace mmap records. For example,
with two nested overlayfs mounts:
mkdir -p /ovl/{lower,upper,work,merged} /ovl/nested
echo hello > /ovl/lower/foo
mount -t overlay overlay \
-o lowerdir=/ovl/lower,upperdir=/ovl/upper,workdir=/ovl/work \
/ovl/merged
# at least two lowerdirs are needed when upperdir is nonexistent
mount -t overlay overlay \
-o lowerdir=/ovl/merged:/ovl/lower /ovl/nested
mapping /ovl/nested/foo shows a disconnected path instead of the user
path:
# readlink /proc/self/fd/3
/ovl/nested/foo
# grep foo /proc/self/maps
7f6e2c100000-7f6e2c101000 r--s 00000000 00:24 15813027 /foo
The bogus path is derived from the f_path of the intermediate backing
file, whose mount is a private clone that d_path() cannot resolve.
Fix this by using file_user_path(), which returns the outermost
user-visible path for backing files and falls back to
&user_file->f_path for regular files. This restores the behavior of
commit 924577e4f6ca ("ovl: Fix nested backing file paths") for
overlayfs and also fixes the same problem for the other
backing_file_open() callers, fuse passthrough and erofs ishare, when
their user file is itself a backing file.
backing_tmpfile_open() has the same pattern but is not affected: it is
only called by ovl_create_tmpfile() for the upper layer, and another
overlayfs is rejected as upperdir by the DCACHE_OP_REAL check in
ovl_mount_dir_check(), so its user_file can never be a backing file. |
