| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in virtio-win, specifically within the VirtIO Block (BLK) device. When the device undergoes a reset, it fails to properly manage memory, resulting in a use-after-free vulnerability. This issue could allow a local attacker to corrupt system memory, potentially leading to system instability or unexpected behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix NULL pointer dereference in tipc_mon_reinit_self()
syzbot reported:
tipc: Node number set to 1055423674
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 3 UID: 0 PID: 6017 Comm: kworker/3:5 Not tainted 6.15.0-rc1-syzkaller-00246-g900241a5cc15 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: events tipc_net_finalize_work
RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719
...
RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba
RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010
RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007
R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010
FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tipc_net_finalize+0x10b/0x180 net/tipc/net.c:140
process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400
kthread+0x3c2/0x780 kernel/kthread.c:464
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
...
RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719
...
RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba
RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010
RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007
R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010
FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
There is a racing condition between workqueue created when enabling
bearer and another thread created when disabling bearer right after
that as follow:
enabling_bearer | disabling_bearer
--------------- | ----------------
tipc_disc_timeout() |
{ | bearer_disable()
... | {
schedule_work(&tn->work); | tipc_mon_delete()
... | {
} | ...
| write_lock_bh(&mon->lock);
| mon->self = NULL;
| write_unlock_bh(&mon->lock);
| ...
| }
tipc_net_finalize_work() | }
{ |
... |
tipc_net_finalize() |
{ |
... |
tipc_mon_reinit_self() |
{ |
... |
write_lock_bh(&mon->lock); |
mon->self->addr = tipc_own_addr(net); |
write_unlock_bh(&mon->lock); |
...
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: ci_hdrc_imx: fix usbmisc handling
usbmisc is an optional device property so it is totally valid for the
corresponding data->usbmisc_data to have a NULL value.
Check that before dereferencing the pointer.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: class: Fix NULL pointer access
Concurrent calls to typec_partner_unlink_device can lead to a NULL pointer
dereference. This patch adds a mutex to protect USB device pointers and
prevent this issue. The same mutex protects both the device pointers and
the partner device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: null - Use spin lock instead of mutex
As the null algorithm may be freed in softirq context through
af_alg, use spin locks instead of mutexes to protect the default
null algorithm. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix kmemleak warning for percpu hashmap
Vlad Poenaru reported the following kmemleak issue:
unreferenced object 0x606fd7c44ac8 (size 32):
backtrace (crc 0):
pcpu_alloc_noprof+0x730/0xeb0
bpf_map_alloc_percpu+0x69/0xc0
prealloc_init+0x9d/0x1b0
htab_map_alloc+0x363/0x510
map_create+0x215/0x3a0
__sys_bpf+0x16b/0x3e0
__x64_sys_bpf+0x18/0x20
do_syscall_64+0x7b/0x150
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Further investigation shows the reason is due to not 8-byte aligned
store of percpu pointer in htab_elem_set_ptr():
*(void __percpu **)(l->key + key_size) = pptr;
Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size
is 4, that means pptr is stored in a location which is 4 byte aligned but
not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based
on 8 byte stride, so it won't detect above pptr, hence reporting the memory
leak.
In htab_map_alloc(), we already have
htab->elem_size = sizeof(struct htab_elem) +
round_up(htab->map.key_size, 8);
if (percpu)
htab->elem_size += sizeof(void *);
else
htab->elem_size += round_up(htab->map.value_size, 8);
So storing pptr with 8-byte alignment won't cause any problem and can fix
kmemleak too.
The issue can be reproduced with bpf selftest as well:
1. Enable CONFIG_DEBUG_KMEMLEAK config
2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c.
The purpose is to keep map available so kmemleak can be detected.
3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Purge vif txq in ieee80211_do_stop()
After ieee80211_do_stop() SKB from vif's txq could still be processed.
Indeed another concurrent vif schedule_and_wake_txq call could cause
those packets to be dequeued (see ieee80211_handle_wake_tx_queue())
without checking the sdata current state.
Because vif.drv_priv is now cleared in this function, this could lead to
driver crash.
For example in ath12k, ahvif is store in vif.drv_priv. Thus if
ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be
NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to
trigger the NULL deref below.
Unable to handle kernel paging request at virtual address dfffffc000000001
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
batman_adv: bat0: Interface deactivated: brbh1337
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfffffc000000001] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114
Hardware name: HW (DT)
pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k]
lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k]
sp : ffffffc086ace450
x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4
x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e
x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0
x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958
x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8
x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03
x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40
x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0
x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008
Call trace:
ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P)
ieee80211_handle_wake_tx_queue+0x16c/0x260
ieee80211_queue_skb+0xeec/0x1d20
ieee80211_tx+0x200/0x2c8
ieee80211_xmit+0x22c/0x338
__ieee80211_subif_start_xmit+0x7e8/0xc60
ieee80211_subif_start_xmit+0xc4/0xee0
__ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0
ieee80211_subif_start_xmit_8023+0x124/0x488
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
br_dev_queue_push_xmit+0x120/0x4a8
__br_forward+0xe4/0x2b0
deliver_clone+0x5c/0xd0
br_flood+0x398/0x580
br_dev_xmit+0x454/0x9f8
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
ip6_finish_output2+0xc28/0x1b60
__ip6_finish_output+0x38c/0x638
ip6_output+0x1b4/0x338
ip6_local_out+0x7c/0xa8
ip6_send_skb+0x7c/0x1b0
ip6_push_pending_frames+0x94/0xd0
rawv6_sendmsg+0x1a98/0x2898
inet_sendmsg+0x94/0xe0
__sys_sendto+0x1e4/0x308
__arm64_sys_sendto+0xc4/0x140
do_el0_svc+0x110/0x280
el0_svc+0x20/0x60
el0t_64_sync_handler+0x104/0x138
el0t_64_sync+0x154/0x158
To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could
be dequeued after ieee80211_do_stop() (new packets cannot be queued
because SDATA_STATE_RUNNING is cleared at this point). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
avs_component_probe() does not check for this case, which results in a
NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: Prevent potential NULL dereference
The btrtl_initialize() function checks that rtl_load_file() either
had an error or it loaded a zero length file. However, if it loaded
a zero length file then the error code is not set correctly. It
results in an error pointer vs NULL bug, followed by a NULL pointer
dereference. This was detected by Smatch:
drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR' |
| A flaw was found in virtio-win. The `RhelDoUnMap()` function does not properly validate the number of descriptors provided by a user during an unmap request. A local user could exploit this input validation vulnerability by supplying an excessive number of descriptors, leading to a buffer overrun. This can cause a system crash, resulting in a Denial of Service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error path
In the for loop used to allocate the loc_array and bmap for each port, a
memory leak is possible when the allocation for loc_array succeeds,
but the allocation for bmap fails. This is because when the control flow
goes to the label free_eth_finfo, only the allocations starting from
(i-1)th iteration are freed.
Fix that by freeing the loc_array in the bmap allocation error path. |
| In the Linux kernel, the following vulnerability has been resolved:
virtiofs: add filesystem context source name check
In certain scenarios, for example, during fuzz testing, the source
name may be NULL, which could lead to a kernel panic. Therefore, an
extra check for the source name should be added. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix hang while freeing sigtrap event
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: hibernate: Avoid deadlock in hibernate_compressor_param_set()
syzbot reported a deadlock in lock_system_sleep() (see below).
The write operation to "/sys/module/hibernate/parameters/compressor"
conflicts with the registration of ieee80211 device, resulting in a deadlock
when attempting to acquire system_transition_mutex under param_lock.
To avoid this deadlock, change hibernate_compressor_param_set() to use
mutex_trylock() for attempting to acquire system_transition_mutex and
return -EBUSY when it fails.
Task flags need not be saved or adjusted before calling
mutex_trylock(&system_transition_mutex) because the caller is not going
to end up waiting for this mutex and if it runs concurrently with system
suspend in progress, it will be frozen properly when it returns to user
space.
syzbot report:
syz-executor895/5833 is trying to acquire lock:
ffffffff8e0828c8 (system_transition_mutex){+.+.}-{4:4}, at: lock_system_sleep+0x87/0xa0 kernel/power/main.c:56
but task is already holding lock:
ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: kernel_param_lock kernel/params.c:607 [inline]
ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: param_attr_store+0xe6/0x300 kernel/params.c:586
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (param_lock){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
ieee80211_rate_control_ops_get net/mac80211/rate.c:220 [inline]
rate_control_alloc net/mac80211/rate.c:266 [inline]
ieee80211_init_rate_ctrl_alg+0x18d/0x6b0 net/mac80211/rate.c:1015
ieee80211_register_hw+0x20cd/0x4060 net/mac80211/main.c:1531
mac80211_hwsim_new_radio+0x304e/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5558
init_mac80211_hwsim+0x432/0x8c0 drivers/net/wireless/virtual/mac80211_hwsim.c:6910
do_one_initcall+0x128/0x700 init/main.c:1257
do_initcall_level init/main.c:1319 [inline]
do_initcalls init/main.c:1335 [inline]
do_basic_setup init/main.c:1354 [inline]
kernel_init_freeable+0x5c7/0x900 init/main.c:1568
kernel_init+0x1c/0x2b0 init/main.c:1457
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #2 (rtnl_mutex){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
wg_pm_notification drivers/net/wireguard/device.c:80 [inline]
wg_pm_notification+0x49/0x180 drivers/net/wireguard/device.c:64
notifier_call_chain+0xb7/0x410 kernel/notifier.c:85
notifier_call_chain_robust kernel/notifier.c:120 [inline]
blocking_notifier_call_chain_robust kernel/notifier.c:345 [inline]
blocking_notifier_call_chain_robust+0xc9/0x170 kernel/notifier.c:333
pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102
snapshot_open+0x189/0x2b0 kernel/power/user.c:77
misc_open+0x35a/0x420 drivers/char/misc.c:179
chrdev_open+0x237/0x6a0 fs/char_dev.c:414
do_dentry_open+0x735/0x1c40 fs/open.c:956
vfs_open+0x82/0x3f0 fs/open.c:1086
do_open fs/namei.c:3830 [inline]
path_openat+0x1e88/0x2d80 fs/namei.c:3989
do_filp_open+0x20c/0x470 fs/namei.c:4016
do_sys_openat2+0x17a/0x1e0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x175/0x210 fs/open.c:1454
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #1 ((pm_chain_head).rwsem){++++}-{4:4}:
down_read+0x9a/0x330 kernel/locking/rwsem.c:1524
blocking_notifier_call_chain_robust kerne
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_pci_remove()
Kmemleak reported this error:
unreferenced object 0xffff1c165cec3060 (size 32):
comm "insmod", pid 560, jiffies 4296964570 (age 235.596s)
backtrace:
[<000000005434db68>] __kmem_cache_alloc_node+0x1f4/0x2c0
[<000000001203b155>] kmalloc_trace+0x40/0x88
[<0000000028adc9c8>] _request_firmware+0xb8/0x608
[<00000000cad1aef7>] firmware_request_nowarn+0x50/0x80
[<000000005011a682>] local_pci_probe+0x48/0xd0
[<00000000077cd295>] pci_device_probe+0xb4/0x200
[<0000000087184c94>] really_probe+0x150/0x2c0
The firmware memory was allocated in ath12k_pci_probe(), but not
freed in ath12k_pci_remove() in case ATH12K_FLAG_QMI_FAIL bit is
set. So call ath12k_fw_unmap() to free the memory.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.2.0-02280-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Avoid memory leak while enabling statistics
Driver uses monitor destination rings for extended statistics mode and
standalone monitor mode. In extended statistics mode, TLVs are parsed from
the buffer received from the monitor destination ring and assigned to the
ppdu_info structure to update per-packet statistics. In standalone monitor
mode, along with per-packet statistics, the packet data (payload) is
captured, and the driver updates per MSDU to mac80211.
When the AP interface is enabled, only extended statistics mode is
activated. As part of enabling monitor rings for collecting statistics,
the driver subscribes to HAL_RX_MPDU_START TLV in the filter
configuration. This TLV is received from the monitor destination ring, and
kzalloc for the mon_mpdu object occurs, which is not freed, leading to a
memory leak. The kzalloc for the mon_mpdu object is only required while
enabling the standalone monitor interface. This causes a memory leak while
enabling extended statistics mode in the driver.
Fix this memory leak by removing the kzalloc for the mon_mpdu object in
the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone
monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs.
These TLV tags will be handled properly when enabling standalone monitor
mode in the future.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
net: vlan: don't propagate flags on open
With the device instance lock, there is now a possibility of a deadlock:
[ 1.211455] ============================================
[ 1.211571] WARNING: possible recursive locking detected
[ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted
[ 1.211823] --------------------------------------------
[ 1.211936] ip/184 is trying to acquire lock:
[ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0
[ 1.212207]
[ 1.212207] but task is already holding lock:
[ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.212487]
[ 1.212487] other info that might help us debug this:
[ 1.212626] Possible unsafe locking scenario:
[ 1.212626]
[ 1.212751] CPU0
[ 1.212815] ----
[ 1.212871] lock(&dev->lock);
[ 1.212944] lock(&dev->lock);
[ 1.213016]
[ 1.213016] *** DEADLOCK ***
[ 1.213016]
[ 1.213143] May be due to missing lock nesting notation
[ 1.213143]
[ 1.213294] 3 locks held by ip/184:
[ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0
[ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0
[ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.213895]
[ 1.213895] stack backtrace:
[ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5
[ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 1.213994] Call Trace:
[ 1.213995] <TASK>
[ 1.213996] dump_stack_lvl+0x8e/0xd0
[ 1.214000] print_deadlock_bug+0x28b/0x2a0
[ 1.214020] lock_acquire+0xea/0x2a0
[ 1.214027] __mutex_lock+0xbf/0xd40
[ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI
[ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev
[ 1.214042] __dev_open+0x145/0x270
[ 1.214046] __dev_change_flags+0xb0/0x1e0
[ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev
[ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info
[ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0
[ 1.214058] notifier_call_chain+0x78/0x120
[ 1.214062] netif_open+0x6d/0x90
[ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0
[ 1.214066] bond_enslave+0x64c/0x1230
[ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0
[ 1.214077] do_setlink+0x516/0x13b0
[ 1.214094] rtnl_newlink+0xaba/0xb80
[ 1.214132] rtnetlink_rcv_msg+0x440/0x490
[ 1.214144] netlink_rcv_skb+0xeb/0x120
[ 1.214150] netlink_unicast+0x1f9/0x320
[ 1.214153] netlink_sendmsg+0x346/0x3f0
[ 1.214157] __sock_sendmsg+0x86/0xb0
[ 1.214160] ____sys_sendmsg+0x1c8/0x220
[ 1.214164] ___sys_sendmsg+0x28f/0x2d0
[ 1.214179] __x64_sys_sendmsg+0xef/0x140
[ 1.214184] do_syscall_64+0xec/0x1d0
[ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 1.214191] RIP: 0033:0x7f2d1b4a7e56
Device setup:
netdevsim0 (down)
^ ^
bond netdevsim1.100@netdevsim1 allmulticast=on (down)
When we enslave the lower device (netdevsim0) which has a vlan, we
propagate vlan's allmuti/promisc flags during ndo_open. This causes
(re)locking on of the real_dev.
Propagate allmulti/promisc on flags change, not on the open. There
is a slight semantics change that vlans that are down now propagate
the flags, but this seems unlikely to result in the real issues.
Reproducer:
echo 0 1 > /sys/bus/netdevsim/new_device
dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*)
dev=$(echo $dev_path | rev | cut -d/ -f1 | rev)
ip link set dev $dev name netdevsim0
ip link set dev netdevsim0 up
ip link add link netdevsim0 name netdevsim0.100 type vlan id 100
ip link set dev netdevsim0.100 allm
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Don't try to trigger a full GT reset if VF
VFs don't have access to the GDRST(0x941c) register that driver
uses to reset a GT. Attempt to trigger a reset using debugfs:
$ cat /sys/kernel/debug/dri/0000:00:02.1/gt0/force_reset
or due to a hang condition detected by the driver leads to:
[ ] xe 0000:00:02.1: [drm] GT0: trying reset from force_reset [xe]
[ ] xe 0000:00:02.1: [drm] GT0: reset queued
[ ] xe 0000:00:02.1: [drm] GT0: reset started
[ ] ------------[ cut here ]------------
[ ] xe 0000:00:02.1: [drm] GT0: VF is trying to write 0x1 to an inaccessible register 0x941c+0x0
[ ] WARNING: CPU: 3 PID: 3069 at drivers/gpu/drm/xe/xe_gt_sriov_vf.c:996 xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] RIP: 0010:xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] ? show_regs+0x6c/0x80
[ ] ? __warn+0x93/0x1c0
[ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] ? report_bug+0x182/0x1b0
[ ] ? handle_bug+0x6e/0xb0
[ ] ? exc_invalid_op+0x18/0x80
[ ] ? asm_exc_invalid_op+0x1b/0x20
[ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] ? xe_gt_tlb_invalidation_reset+0xef/0x110 [xe]
[ ] ? __mutex_unlock_slowpath+0x41/0x2e0
[ ] xe_mmio_write32+0x64/0x150 [xe]
[ ] do_gt_reset+0x2f/0xa0 [xe]
[ ] gt_reset_worker+0x14e/0x1e0 [xe]
[ ] process_one_work+0x21c/0x740
[ ] worker_thread+0x1db/0x3c0
Fix that by sending H2G VF_RESET(0x5507) action instead. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type
The access to the PCI config space via pci_ops::read and pci_ops::write is
a low-level hardware access. The functions can be accessed with disabled
interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this
purpose.
A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in
the same context as the pci_lock.
Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with
interrupts disabled.
This was reported as:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
Call Trace:
rt_spin_lock+0x4e/0x130
vmd_pci_read+0x8d/0x100 [vmd]
pci_user_read_config_byte+0x6f/0xe0
pci_read_config+0xfe/0x290
sysfs_kf_bin_read+0x68/0x90
[bigeasy: reword commit message]
Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
[kwilczynski: commit log]
[bhelgaas: add back report info from
https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/] |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix io_req_post_cqe abuse by send bundle
[ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0
[ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0
[ 115.001880][ T5313] Call Trace:
[ 115.002222][ T5313] <TASK>
[ 115.007813][ T5313] io_send+0x4fe/0x10f0
[ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740
[ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0
[ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600
[ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0
As the comment states, io_req_post_cqe() should only be used by
multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are
not. Add a flag signifying whether a request wants to post multiple
CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but
that's left out for simplicity. |
