| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: port: Deattach Type-C connector on component unbind
connector_unbind() is the mirror of connector_bind(), but it is missing
the symmetric call to typec_deattach() that connector_bind() makes via:
if (port_dev->child)
typec_attach(port_dev->connector, &port_dev->child->dev);
When a Thunderbolt dock is unplugged, two teardown paths race:
1. The component framework calls connector_unbind() first, which sets
port_dev->connector = NULL without calling typec_deattach(). This
leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at
the USB device that is about to be freed.
2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...),
but port_dev->connector is already NULL, so the call is a no-op and
port->usb2_dev is never cleared.
3. Concurrently, UCSI detects a PD partner-disconnect event and calls
typec_unregister_partner(), which reads port->usb2_dev (now a dangling
pointer to freed memory) and passes it to typec_partner_unlink_device()
-> sysfs_remove_link() -> dev_name() on the freed device, corrupting
the typec/UCSI partner state.
This corruption leaves the Thunderbolt tunnel in an inconsistent state on
the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails
to enumerate: AER fires a slot reset while the igc driver is still
initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits
igc_rd32 on an already-detached device:
igc 0000:2e:00.0 eth0: PCIe link lost, device now detached
igc: Failed to read reg 0x0!
WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005
igc_rd32+0xa4/0xc0 [igc]
Call Trace:
igc_disable_pcie_master+0x16/0xa0 [igc]
igc_reset_hw_base+0x14/0x170 [igc]
igc_reset+0x63/0x110 [igc]
igc_io_slot_reset+0x9e/0xd0 [igc]
report_slot_reset+0x5d/0xc0
pcie_do_recovery+0x209/0x400
aer_isr_one_error_type+0x235/0x430
aer_isr+0x4e/0x80
irq_thread+0xf4/0x1f0
4. UCSI later handles the PD partner-disconnect and calls
typec_unregister_partner(), which still sees the stale port->usb2_dev
and tries to remove its sysfs link a second time:
kernfs: can not remove 'typec', no directory
WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call Trace:
sysfs_remove_link+0x19/0x50
typec_unregister_partner+0x6e/0x120 [typec]
ucsi_unregister_partner+0x107/0x150 [typec_ucsi]
ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
ret_from_fork+0x121/0x140
ret_from_fork_asm+0x1a/0x30
With worse timing the same stale pointer is dereferenced after the
backing memory is freed, turning the warning into a use-after-free.
Fix the asymmetry: call typec_deattach() before clearing
port_dev->connector, matching what connector_bind() does on the bind side.
typec_partner_deattach() is already protected by port->partner_link_lock,
so it serialises safely with the concurrent typec_unregister_partner() path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
UDP sockets get SOCK_RCU_FREE set when (auto-)bound. This means
sk_is_refcounted(unbound) = true, while sk_is_refcounted(bound) = false.
Because sockmap accepts unbound UDP sockets, a BPF program can increment a
socket's refcount via lookup. If the socket is subsequently bound, the
transition from unbound to bound causes bpf_sk_release() to skip the
decrement of the refcount, causing a memory leak.
unreferenced object 0xffff88810bc2eb40 (size 1984):
comm "test_progs", pid 2451, jiffies 4295320596
hex dump (first 32 bytes):
7f 00 00 01 7f 00 00 01 d2 04 1b b7 04 d2 00 00 ................
02 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc bdee079d):
kmem_cache_alloc_noprof+0x557/0x660
sk_prot_alloc+0x69/0x240
sk_alloc+0x30/0x460
inet_create+0x2ce/0xf80
__sock_create+0x25b/0x5c0
__sys_socket+0x119/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0xa1/0x5f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Instead of special-casing for refcounted sockets, reject unhashed UDP
sockets during sockmap updates, as there is no benefit to supporting those.
This effectively reverts the commit under Fixes, with two exceptions:
1. sock_map_sk_state_allowed() maintains a fall-through `return true`.
2. In the spirit of commit b8b8315e39ff ("bpf, sockmap: Remove unhash
handler for BPF sockmap usage"), the proto::unhash BPF handler is not
reintroduced.
Historical note: this issue is related to commit 67312adc96b5 ("bpf: reject
unhashed sockets in bpf_sk_assign"). |
| Always-incorrect control flow implementation in some firmware for some Intel(R) Xeon(R) processors may allow an escalation of privilege. System software adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (none) impacts. |
| The Ray Enterprise Translation WordPress plugin through 1.7.3 does not perform any capability or nonce checks on one of its AJAX actions, allowing any authenticated user, including Subscribers, to overwrite the administrator-configured translation API token with an arbitrary value. |
| A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size. |
| CAI Content Credentials is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered
sata_dwc_enable_interrupts() is called before platform_get_irq() and
ata_host_activate(), leaving the SATA controller's interrupt mask
enabled without a registered handler. If a later step fails (irq
request, phy init, etc.) or if the controller asserts an interrupt
during probe, the irq line may fire with no handler, causing a
spurious interrupt storm.
Move sata_dwc_enable_interrupts() after ata_host_activate() so that
interrupts are only unmasked once the handler is registered and the
core is fully initialized. |
| Adobe Commerce is affected by an Incorrect Authorization vulnerability that could result in privilege escalation. An attacker with high privileges could exploit this vulnerability to gain elevated access to restricted resources. Exploitation of this issue does not require user interaction. |
| A flaw was found in odh-dashboard. An authenticated user of the dashboard can exploit a vulnerability related to how RoleBindings are created. The system does not properly validate the `roleRef` field, allowing a user to specify an arbitrary role, including highly privileged ones like `cluster-admin`. This can lead to privilege escalation, where an attacker gains unauthorized elevated access within their namespace and potentially persistent control over the system. |
| The Ray Enterprise Translation WordPress plugin through 1.7.3 does not perform any capability or nonce checks on one of its AJAX actions, allowing any authenticated user, including Subscribers, to add or delete the site's configured languages. |
| A flaw was found in Picketlink Federation SAML; the unsolcited response handler would accept forged assertions with no verification or validation, permitting an unauthed attacker to authenticate as any principal in any role. This could lead to information disclosure, access to restricted operations, or other flaws. |
| Hardware logic contains race conditions for some 3rd Gen Intel(R) Xeon(R) Scalable Processors within Ring 3: unprivileged software may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| Improper input validation in some firmware for some Intel(R) Active Management Technology (Intel(R) AMT) and some Intel(R) Standard Manageability may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via network access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Apache Allura's webhooks are vulnerable to Server-Side Request Forgery (SSRF).
This issue affects Apache Allura: before 1.19.1.
Users are recommended to upgrade to version 1.19.1, which fixes the issue. |
| CAI Content Credentials is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. Exploitation of this issue requires user interaction in that a victim must visit a maliciously crafted URL or interact with a compromised web page. Scope is changed. |
| Missing authorization in Microsoft Exchange Server allows an authorized attacker to bypass a security feature over a network. |
| A flaw was found in the provider-credential-controller component of multicluster-engine (MCE). An attacker with specific permissions on the hub cluster, and knowledge of a prior credential value, could exploit an authorization bypass vulnerability. By manipulating `copiedFrom` labels, the attacker could intercept newly rotated provider credentials, leading to unauthorized information disclosure. This allows access to sensitive credentials that should otherwise be protected. |
| Activepieces is an open source AI workflow automation platform. Prior to 0.80.0, the worker's code-compilation pipeline builds the on-disk path for a Code step from the step's name and passes that path to a shell-invoked build command. A step name containing shell metacharacters can break out of the intended build invocation and execute arbitrary commands during compilation before any code sandbox is created. An authenticated user with permission to create or edit a flow can execute commands as the worker process user, read and write the worker filesystem, exfiltrate environment secrets, and reach internal services available to the worker. This issue is fixed in version 0.80.0. |
| A flaw was found in the cluster-curator-controller component of multicluster engine (MCE). A tenant with create or update permissions on ClusterCurator resources can inject an arbitrary Job specification. This is possible because the CreateJob() function does not validate user-controlled input when unmarshaling the spec.install.overrideJob raw extension. Successful exploitation allows the injected Job to run with the controller's elevated privileges, leading to arbitrary code execution and privilege escalation, potentially accessing cluster-wide secrets. |
| In OpenStack Designate before 22.0.1, zone creation checks (_is_subzone, _is_superzone, and the duplicate-zone DB constraint) are scoped to the target pool only. An authenticated user can bypass these checks by scheduling a zone to a different pool via the AttributeFilter scheduler, creating an overlapping zone that conflicts with another tenant's zone. This enables cross-tenant DNS hijack (redirecting traffic to attacker-controlled IPs) and DNS denial of service (NODATA responses). Exploitation requires a multi-pool deployment with AttributeFilter enabled in scheduler_filters, which is a non-default but documented and supported configuration for self-service tiering. |
