| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the maas-api and maas-controller ServiceAccounts within Red Hat OpenShift AI. These ServiceAccounts are granted cluster-wide permissions that exceed their operational requirements. An attacker who compromises the identity of these ServiceAccounts, either through a remote code execution vulnerability or by creating a malicious pod in the same namespace, could exploit these excessive permissions. This could lead to full cluster administrator privileges through the creation of new ClusterRoleBindings or the disclosure of sensitive information by accessing all secrets across the cluster. |
| A flaw has been found in kylecui NetForensicMCP 2.1.0. Impacted is the function execAsync of the file index.js. Executing a manipulation of the argument interface/protocol can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix mrec_lock ABBA deadlock in rename
ntfs_file_fsync(), ntfs_dir_fsync() and __ntfs_write_inode() lock an
inode's mrec_lock before taking the mrec_lock of its parent directory.
ntfs_rename() takes old_ni->mrec_lock and old_dir_ni->mrec_lock
before taking new_ni->mrec_lock for an existing target, or
new_dir_ni->mrec_lock for a cross-directory rename.
This can deadlock when ntfs_file_fsync() or __ntfs_write_inode() holds
the target inode, or when ntfs_dir_fsync() holds a child target
directory, while rename() holds the parent directory and waits for the
target.
Fix this by locking the existing target inode before taking any parent
directory mrec_lock. For cross-directory renames where the target parent
is a descendant of the source parent, lock the target parent before the
source parent so the directory order matches the child-to-parent order used
by ntfs_file_fsync(), ntfs_dir_fsync(), and __ntfs_write_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid R5_Overlap races while breaking stripe batches
KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()
on sh->dev[i].flags (plain word write vs. atomic bit op)..
and .. one possible scenario is:
CPU1 CPU2
break_stripe_batch_list(sh1)
-> handle sh2
-> lock(sh2)
-> sh2->batch_head = NULL
-> unlock(sh2)
-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)
-> wake_up_bit(sh2->dev[i].flags)
raid5_make_request()
-> add_all_stripe_bios(sh2)
-> lock(sh2)
-> stripe_bio_overlaps(sh2) returns true
batch_head is NULL, so new bio overlap
exist bio on sh2 -> true
-> set_bit(R5_Overlap, sh2->dev[i].flags)
-> unlock(sh2)
-> wait_on_bit(sh2->dev[i].flags)
-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap
No wait_up_bit(), CPU2 could be wait_on_bit() forever...
Fix by :
- Expand the protect zone.
- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.
- Move sh/head_sh->batch_head = NULL to the end of protected zone , and ,
any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:
- see batch_head != null, and , is rejected by stripe_bio_overlaps()
under the lock (no R5_Overlap wait ) , or ,
- sees batch_head == NULL, only after dev[i].flags has already been
set and the prior R5_Overlap waiters worken.
KCSAN report:
================================================
BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request
write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0:
raid5_make_request+0xea0/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
__x64_sys_io_submit+0xf7/0x220
x64_sys_call+0x1907/0x1c60
do_syscall_64+0x130/0x570
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5:
break_stripe_batch_list+0x249/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
md_thread+0x15a/0x2d0
kthread+0x1e3/0x220
ret_from_fork+0x37a/0x410
ret_from_fork_asm+0x1a/0x30
value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Guard conntrack opts error writes
The conntrack lookup and allocation kfuncs take an opts pointer
together with an opts__sz argument. The verifier checks only the memory
range described by opts__sz, but the wrappers unconditionally write
opts->error whenever the internal lookup or allocation helper returns an
error.
For an invalid size smaller than the end of opts->error, that write can
land outside the verifier-checked range. Keep returning NULL for invalid
arguments, but only report the error through opts->error when the
supplied size includes the field.
This preserves error reporting for the supported 12-byte and 16-byte
layouts, and for other invalid sizes that still include opts->error. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
log_replay() allocates log->one_page_buf using the page size that was
chosen from the host PAGE_SIZE:
log->one_page_buf = kmalloc(log->page_size, GFP_NOFS);
Later, when a restart area is found, the log page size recorded on disk
is adopted:
t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size);
if (log->page_size != t32) {
log->l_size = log->orig_file_size;
log->page_size = norm_file_page(t32, &log->l_size,
t32 == DefaultLogPageSize);
}
If the on-disk page size is larger than the size used for the initial
allocation, log->page_size grows but one_page_buf is left at its
original, smaller size. A subsequent unaligned read_log_page() then
reads log->page_size bytes into the undersized scratch buffer:
page_buf = page_off ? log->one_page_buf : *buffer;
err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf,
log->page_size, NULL, &log->read_ahead);
overflowing the allocation. This is reachable when mounting a dirty
NTFS volume whose log was formatted with a page size larger than the
buffer initially allocated on the mounting host (for example a 64K-log
volume mounted on a host that allocated a 4K scratch buffer).
Grow one_page_buf when the adopted on-disk page size exceeds the size
used for the initial allocation. On krealloc() failure the original
buffer is left intact and freed by the existing error path. |
| In JetBrains YouTrack before 2026.1.13901,
2026.2.17950 doS attack was possible via crafted type parameters |
| In JetBrains IntelliJ IDEA before 2026.2.1 sSRF was possible via the DevKit debug listener endpoint |
| In JetBrains IntelliJ IDEA before 2026.1.5 git credentials were written in plaintext to the IDE log |
| TIER IV Nebula through 1.2.0 contains an out-of-bounds read vulnerability in the Vlp32Decoder::unpack() function that allows unauthenticated remote attackers to cause the decoder to read past the end of a received UDP buffer into adjacent heap memory by sending a short UDP datagram. Attackers can send a malformed datagram to the Velodyne UDP sensor port, which lacks sender-address restrictions present in other drivers, causing fabricated points derived from heap memory contents to be silently published into downstream PointCloud2 messages consumed by Autoware nodes. |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 IBM WebSphere Application Server Liberty is vulnerable to an authentication bypass when the rtcomm-1.0 or rtcommGateway-1.0 feature is enabled. |
| A race condition in the Apache Kafka Java producer client’s buffer pool management can cause messages to be silently delivered to incorrect topics.
When a produce batch expires due to delivery.timeout.ms while a network request containing that batch is still in flight, the batch’s ByteBuffer is prematurely deallocated and returned to the buffer pool. If a subsequent producer batch—potentially destined for a different topic—reuses this freed buffer before the original network request completes, the buffer contents may become corrupted. This can result in messages being delivered to unintended topics without any error being reported to the producer.
Data Confidentiality:
Messages intended for one topic may be delivered to a different topic, potentially exposing sensitive data to consumers who have access to the destination topic but not the intended source topic.
Data Integrity:
Consumers on the receiving topic may encounter unexpected or incompatible messages, leading to deserialization failures, processing errors, and corrupted downstream data.
This issue affects Apache Kafka versions ≤ 3.9.1, ≤ 4.0.1, and ≤ 4.1.1.
Kafka users are advised to upgrade to 3.9.2, 4.0.2, 4.1.2, 4.2.0, or later to address this vulnerability. |
| Remote Code Execution via Arbitrary Class Instantiation in plugin-schema-registry component in Apache Ranger <= 2.8.0.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| cryptodev-linux version 1.14 and prior contain a page reference handling flaw in the get_userbuf function of the /dev/crypto device driver that allows local users to trigger use-after-free conditions. Attackers with access to the /dev/crypto interface can repeatedly decrement reference counts of controlled pages to achieve local privilege escalation. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent potential lcn remains uninitialized
The target VCN being sought was not found within runs[0], causing
run_lookup() to return false. This causes run_lookup_entry() to return
false, which in turn results in a len value of 0, and the new parameter
passed to attr_data_get_block() is NULL. Collectively, these factors
ultimately cause attr_data_get_block_locked() to exit prematurely without
initializing lcn, thereby triggering [1].
To prevent [1], the clen check within ni_seek_data_or_hole() has been
moved to occur before the lcn check.
[1]
BUG: KMSAN: uninit-value in ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ntfs_llseek+0x22a/0x4a0 fs/ntfs3/file.c:1530
vfs_llseek fs/read_write.c:391 [inline] |
| In JetBrains YouTrack before 2025.3.156085,
2026.1.13914,
2026.2.18095 missing authorisation allowed an authenticated user to delete arbitrary entities via the mailbox endpoint |
| In JetBrains YouTrack before 2026.2.18177 doS attack was possible via a decompression bomb in the import endpoint |
| In JetBrains YouTrack before 2026.2.18068 stored XSS via the fenced code-block language label was possible |
| In JetBrains YouTrack before 2026.1.13903,
2026.2.17950 an authenticated user could read restricted articles from other projects via the draft creation endpoint |
| In JetBrains IntelliJ IDEA before 2026.2.1 hadoop ResourceManager could read local files via XXE |
