| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| TLS hostname verification issue in Apache Ranger Client Code in versions <= 2.8.0.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 Reverse Proxy in certain configurations may provide weaker than expected cryptographic validation of user supplied data. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix error handling in pdsc_devcmd_wait
Fix two cases where pdsc_devcmd_wait() returns stale success from
the completion register instead of an error:
1. FW crash: If firmware stops running, the wait loop breaks early with
running=false. The condition "if ((!done || timeout) && running)" is
false, so error handling is bypassed and stale status is returned.
Check !running first and return -ENXIO.
2. Timeout: If a command times out, err is set to -ETIMEDOUT but then
overwritten by pdsc_err_to_errno(status) which reads stale status.
Return -ETIMEDOUT immediately after cleaning up.
Both errors now propagate to pdsc_devcmd_locked() which queues
health_work for recovery. |
| Path Traversal and Unrestricted File Upload exists in the Ninja Forms plugin before 3.0.23 for WordPress (when the Uploads add-on is activated). This allows an attacker to traverse the file system to access files and execute code via the includes/fields/upload.php (aka upload/submit page) name and tmp_name parameters. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-mapping: move dma_map_resource() sanity check into debug code
dma_map_resource() uses pfn_valid() to ensure the range is not RAM.
However, pfn_valid() only checks for availability of the memory map for
a PFN but it does not ensure that the PFN is actually backed by RAM. On
ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that
share a section with RAM will falsely trigger the WARN_ON_ONCE and cause
dma_map_resource() to return DMA_MAPPING_ERROR.
This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because
the SPI FIFO register (0xfe204004) falls in the same sparsemem section
as the end of RAM (0xf8000000-0xfbffffff), both in section 31
(0xf8000000-0xffffffff).
Move the sanity check from dma_map_resource() into debug_dma_map_phys()
and replace the unreliable pfn_valid() with pfn_valid() &&
!PageReserved(), which correctly identifies actual usable RAM without
false positives for MMIO regions that happen to have struct pages.
Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check
applies equally to both APIs. Any non-reserved page represents kernel
memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost
certainly wrong and risks breaking coherency on non-coherent platforms.
ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have
PageReserved set, so they will not trigger a false positive.
The check no longer blocks the mapping and uses err_printk() to
integrate with dma-debug filtering. |
| PostCSS takes a CSS file and provides an API to analyze and modify its rules by transforming the rules into an Abstract Syntax Tree. Prior to 8.5.18, lib/previous-map.js loadMap() passes attacker-controlled sourceMappingURL values to join(dirname(opts.from), annotation), and loadFile() permits traversed or absolute .map paths, allowing untrusted CSS processed without map: false to disclose sourcesContent from arbitrary reachable .map files through result.map. This issue is fixed in version 8.5.18. |
| Net::OAuth versions before 0.32 for Perl allow memory exhaustion via unbounded caching of failed module loads in smart_require.
smart_require stores results in a process-global hash with no bound and no eviction, and keeps an entry for every class name it is asked about, including names that failed to load, because the return value of the failed eval is stored before the error is checked. The key comes off the wire on the server side: _signature_method_class builds the class name from the signature_method parameter of the incoming message, and verify resolves it before any signature is checked.
A remote client chooses both how many entries are created and how long each key is. In a persistent server the hash grows for the life of the worker process until it exhausts memory. Header size limits bound the key length on the Authorization header path, but not on a POST body. |
| Net::OAuth::Client versions before 0.32 for Perl allow the service provider to silently downgrade OAuth 1.0a to OAuth 1.0 in get_request_token.
Passing a callback to the constructor selects OAuth 1.0a. get_request_token then revokes that choice when the request token response omits oauth_callback_confirmed, with no exception, no warning and no option to require 1.0a. The access token request is built from the OAuth 1.0 message class, which has no verifier parameter, so oauth_verifier is dropped from the request even when get_access_token was passed one.
oauth_verifier is the binding that OAuth 1.0a added between the authorization step and the token exchange. An application that asked for 1.0a and gets 1.0 is open to OAuth 1.0 session fixation, where an attacker obtains a request token, has the victim authorize it, and then completes the exchange themselves, linking the victim's provider account to a session the attacker controls. No attacker action sets up the downgrade: a provider that does not confirm the callback is enough. |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formTracerouteDiagnosticRun interface. A remote attacker can inject arbitrary malicious commands into the host and ipVer fields, resulting in command execution with root privileges. |
| Lemonldap::NG::Portal versions from 2.0.0 before 2.16.9, from 2.17.0 before 2.21.5, from 2.22.0 before 2.23.3 for Perl allow authentication bypass via an OAuth2 state parameter stored as an SSO session in the GitHub and LinkedIn backends.
Before redirecting to the identity provider, extractFormInfo() creates the state session with the positional call `getApacheSession( undef, 1, 0, 'GitHubState' )`. getApacheSession() takes a session id followed by a named argument hash, so the trailing arguments become that hash, `kind` defaults to SSO, and the state is written to the global session storage as a regular SSO session. Its identifier is handed to the unauthenticated visitor as the state parameter of the redirection URL.
Any visitor who reaches the GitHub or LinkedIn endpoint can replay that identifier as a session cookie and obtain a valid SSO session without authenticating. The session holds neither _user nor authenticationLevel, which the shipped bootstrap configuration accepts because it grants virtual hosts a "default => accept" access rule; deployments whose rules test the user or require an authentication level are less exposed. Only configurations with the GitHub or LinkedIn authentication module enabled are affected. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.5 is vulnerable to buffer overflow in the IXF IMPORT parser. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing
xdr_buf_to_bvec() writes a bio_vec into the caller's array before
testing whether that slot is in range, and the head branch performs
the store with no check at all. When the caller's budget is exactly
used up, the next store lands one element past the end of the array.
The overflow label returns count - 1, which masks the surplus store
but cannot undo it.
rq_bvec, the array passed by nfsd_vfs_write(), is allocated to
exactly rq_maxpages entries with no slack. The OOB store can land in
adjacent slab memory; the bv_len and bv_offset fields written there
are derived from client-supplied RPC payload sizes.
Move the in-range check ahead of the store in the head, page-loop,
and tail branches. With the check at the top of each sequence, count
is incremented only after a successful store, so the overflow label
can return count directly. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: pin upper rpc_clnt across the TLS connect_worker
The TLS connect path has a use-after-free: nothing pins the
upper rpc_clnt across the delayed connect_worker. xs_connect()
stores task->tk_client in sock_xprt::clnt as a raw pointer
and queues the worker; for TLS-secured transports that worker
is xs_tcp_tls_setup_socket(), which reads several fields out
of the saved pointer (cl_timeout, cl_program, cl_prog,
cl_vers, cl_cred, cl_stats) to construct the args for the
inner handshake rpc_clnt.
The xprt does not reference the rpc_clnt; the rpc_clnt
references the xprt. xs_destroy() does cancel the
connect_worker, but it runs only when the xprt's refcount
drops to zero, which cannot happen until the rpc_clnt
releases its cl_xprt reference in rpc_free_client_work().
When a TLS handshake fails fatally (for example, an mTLS
mount whose client cert does not match the server), the
connecting task is woken with -EACCES and exits, the mount
caller invokes rpc_shutdown_client(), and the upper rpc_clnt
is freed before the queued connect_worker fires.
xs_tcp_tls_setup_socket() then dereferences the freed clnt,
producing the refcount_t underflow Michael Nemanov reported.
Take a reference on the upper rpc_clnt in xs_connect() for
TLS transports via a new rpc_hold_client() helper, and drop
it in the connect_worker's exit path with rpc_release_client().
The xprt_lock_connect() / xprt_unlock_connect() pairing
already serialises xs_connect() with xs_tcp_tls_setup_socket(),
so the take and release are balanced one-for-one.
The non-TLS connect worker (xs_tcp_setup_socket) never reads
sock_xprt::clnt, so leave that path alone and avoid the
clnt-holds-xprt-holds-clnt cycle that would otherwise prevent
xprt destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: validate DFS referral string offsets
parse_dfs_referrals() validates that the response header and referral
array fit in the received buffer, but each referral also contains string
offsets supplied by the server.
Those offsets are used to compute the DfsPath and NetworkAddress string
pointers without checking whether they still point inside the response
buffer. A malformed referral can therefore make the computed pointer
exceed the end of the buffer. The resulting negative max_len is then
passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it
to kstrndup() as a size_t, allowing strnlen() to read out of bounds.
Validate each string offset before deriving the string pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix VMA access race
aie2_populate_range() and amdxdna_umap_release() access a saved VMA
pointer that may have already been freed, leading to a potential
use-after-free.
Remove the VMA accesses from these functions to avoid the race. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix adv monitor add failure cleanup
hci_add_adv_monitor() publishes a new adv_monitor in
hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT
offload add path can then fail either locally before the controller add
command completes, or in the MSFT add callback. In the current queued
management add flow, hci_cmd_sync_work() still invokes
mgmt_add_adv_patterns_monitor_complete() with the original pending command
after msft_add_monitor_pattern() returns.
The buggy scenario involves two paths, with each column showing the order
within that path:
MSFT add handling MGMT completion
1. insert monitor and handle 1. receive sync error
2. send MSFT add command 2. call add-monitor completion
3. callback sees bad response 3. load cmd->user_data
4. callback frees monitor 4. read monitor->handle
Local MSFT setup failures have the other half of the same ownership bug:
they return an error after the IDR insertion, but no later code removes the
failed monitor from the IDR.
Keep ownership with the pending management command until its completion.
For normal management adds, the MSFT add callback now records successful
controller state and returns errors to its caller. The management
completion frees the monitor on non-success after copying the response
handle, while resume/reregister callback-error cleanup remains in the
MSFT callback. The success path keeps the existing bookkeeping.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x19f/0x330
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
kasan_report+0xe0/0x110
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? 0xffffffffc00d00da
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? hci_cmd_sync_work+0x1ab/0x210 [bluetooth]
hci_cmd_sync_work+0x1c0/0x210 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
process_one_work+0x4fd/0xbc0
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 471 on cpu 3 at 285.205389s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
__sys_sendto+0x2bc/0x2d0
__x64_sys_sendto+0x76/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 454 on cpu 2 at 285.217112s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
msft_add_monitor_sync+0x54a/0x570 [bluetooth]
hci_add_adv_monitor+0x133/0x180 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to access server resources with the privileges of an authenticated user due to improper authentication during NTLM session negotiation. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local authenticated attacker to obtain unauthorized access to files due to a time-of-check time-of-use (TOCTOU) race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Handle unmap error when iommu_debug is enabled
Sashiko noticed a latent bug where the map error flow called iommu_unmap()
which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however
since this is an error path the map flow never actually established the
original iommu_debug_map() it will malfunction.
Lift the unmap error handling into iommu_map_nosync() and reorder it so
the trace_map()/iommu_debug_map() records the partial mapping and then
immediately unmaps it. This avoid creating the unbalanced tracking and
provides saner tracing instead of a unmap unmatched to any map. |
