| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a heap-based buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a stack buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to a buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause a denial of service due to an out-of-bounds write. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote authenticated attacker to execute arbitrary code due to a stack-based buffer overflow. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_proxy_v2_module and ngx_http_grpc_module modules. This vulnerability exists when the proxy_http_version to 2 or grpc_pass directives are used to proxy HTTP/2 traffic, the ignore_invalid_headers directive is set to off, and the large_client_header_buffers directive size is larger than 2 megabytes. A remote, unauthenticated attacker, along with conditions beyond their control, could send large headers while creating an upstream request. This may cause a heap-based buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix type confusion in notification logic
Sashiko reports:
At the start of the loop in pmbus_notify(), the code unconditionally casts
every attribute to a struct sensor_device_attribute:
drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() {
for (i = 0; i < data->num_attributes; i++) {
struct device_attribute *da = to_dev_attr(data->group.attrs[i]);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int index = attr->index;
...
}
However, data->group.attrs can contain other types like struct
pmbus_samples_reg or struct pmbus_sensor, which only embed a base
struct device_attribute.
If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting
it to struct sensor_device_attribute and reading the index field appears
to access memory past the end of the allocation, which might trigger a
slab-out-of-bounds read.
Additionally, if da is a struct pmbus_sensor, casting it causes the index
field to overlap with the page, phase, and reg fields. Could this produce
a garbage mask on little-endian systems that spuriously matches the target
reg, page, and flags during an alert?
Fix the problem by using struct sensor_device_attr in struct pmbus_sensor
and struct pmbus_label. Since those attributes never trigger a
notification, set the value of attr->index to -1 for them. Use this value
to distinguish from boolean attributes which _can_ trigger a notification
and use the index field to encode mask, page, and register values. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: stop estimator after disabled calc phase
IPVS estimator kthread 0 starts with zeroed chain and tick limits until
its initial calculation phase completes. If network namespace teardown
clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return
without installing positive limits.
The kthread can then continue into its main loop and drain
est_temp_list with zero chain_max, tick_max and est_max_count values.
Each enqueue consumes one available tick row, but est_count never
reaches the zero est_max_count value. After all rows are consumed, the
row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes
past the ticks and tick_len arrays.
Exit kthread 0 after the calculation phase if the kthread is stopping or
IPVS has been disabled. That keeps temporary estimators from being
drained after the limits failed to initialize.
Estimator kthreads can now self-exit before teardown or reload stops
kd->task. Keep an extra task reference after creation and release it
with kthread_stop_put(), so kd->task remains valid until the stop paths
consume that reference. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: reject clones that overrun skb_shared_info tailroom
xdpf_clone() clones broadcast copies into a single page and sets
frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that
page like a normal XDP frame and expects the usual skb_shared_info
tailroom at the end of the buffer.
The current check only rejects frames whose linear xdp_frame header,
headroom, and packet data exceed PAGE_SIZE. A source frame backed by a
larger allocation can still satisfy that check while extending into the
clone's required shared-info area. When such a clone is converted back
into an skb, build_skb_around() places skb_shared_info over live packet
bytes and later writes can corrupt XDP return metadata.
Reject clones unless their linear area fits inside
SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already
enforced by the XDP-to-skb conversion path. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip6ip6_err()
ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the
quoted inner IPv6 packet, and then passes the clone to icmpv6_send().
The clone still carries the outer packet's inet6_skb_parm in skb->cb.
If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao
remains non-zero after skb_pull(). icmpv6_send() later calls
mip6_addr_swap(), which uses that stale dsthao offset against the quoted
inner packet. A malformed inner destination-options header can then make
the HAO lookup and address swap run past the end of the quoted packet
and corrupt skb_shared_info.
Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the
reply path does not reuse metadata left by the outer IPv6 stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: bound the hwdep mmap fault offset
snd_us428ctls_vm_fault() turns the faulting page offset into a kernel
address with no bound of any kind:
offset = vmf->pgoff << PAGE_SHIFT;
vaddr = (char *)(...)->us428ctls_sharedmem + offset;
page = virt_to_page(vaddr);
get_page(page);
vmf->page = page;
return 0;
snd_us428ctls_mmap() checks only the length of the mapping, never the
offset, and us428ctls_sharedmem is a single page from
alloc_pages_exact(). For a character device file_mmap_size_max()
returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page
offset above zero resolves to a struct page outside the object, and the
handler installs it into the caller's address space read-write; the vma
is not marked read-only.
The caller picks the page frame with a single mmap() argument and gets
read-write access to a page of kernel memory it does not own; an offset
that lands in an unpopulated vmemmap region oopses instead.
A process that can open the hwdep node of an attached US-X2Y reaches
this after loading the FPGA image through the same node; no capability
check is involved.
On 7.2.0-rc5 (arm64), mmap() with a large offset:
Unable to handle kernel paging request at virtual address fffffdffc45d5ac8
pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
Call trace:
snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
__do_fault
__handle_mm_fault
handle_mm_fault
el0_da
Reject any offset outside the shared region. The pcm hwdep handler in
usx2yhwdeppcm.c computes its address the same way and needs the same
bound.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.11.11, electerm constructs operating system commands in src/app/lib/fs.js by interpolating untrusted file paths into the rmrf(), mv(), and cp() functions. A malicious SSH or SFTP server can provide a filename containing quote characters and shell metacharacters, and a victim can cause that filename to reach the affected operation during remote-to-local transfer, conflict renaming, copying, moving, or removal. The generated `rm -rf`, mv, `cp -r`, PowerShell Remove-Item, Move-Item, or Copy-Item command can then interpret the filename as shell syntax. This allows arbitrary command execution with the electerm desktop user's privileges on POSIX and Windows systems, enabling data exfiltration, file modification, malware installation, or denial of service. This issue is fixed in version 3.11.11. |
| Improper Neutralization of Special Elements used in an OS Command in the package manager component of Black Duck blackduck-c-cpp before 3.0.7 allows an actor able to create a file within the scanned build directory to execute operating system commands as the account running the scan.
Filesystem paths encountered while traversing the scanned directory are interpolated into command strings that are executed through a shell without quoting or escaping, so shell metacharacters within those paths are interpreted rather than treated as literal text. No control over the build command or the tool's configuration is required. |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.7, the expandNppEnvironmentStrs function in PowerEditor/src/WinControls/StaticDialog/RunDlg/RunDlg.cpp copies a Notepad++ variable name between $( and ) into the fixed-size wchar_t str[MAX_PATH] stack buffer without bounding the m loop index, allowing a name of 260 or more characters to corrupt adjacent stack data, terminate the process through __report_gsfailure, and potentially execute code. This issue is fixed in version 8.9.7. |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.7, macros loaded from an attacker-controlled shortcuts.xml bypass the HMAC validation applied to UserDefinedCommands and can invoke Scintilla actions and the internal Open in Default Viewer command in an elevated Notepad++ process, allowing protected file modification and conditional elevated command execution when a local attacker influences settingsDir and a user triggers the macro. This issue is fixed in version 8.9.7. |
| 4MOSAn GCB Doctor developed by 4MOSAn Security Technology has a OS Command Injection vulnerability. Unauthenticated remote attackers can inject malicious commands through an unremoved ADOdb test page parameter, thereby executing arbitrary system commands on the server. |
| Sakura Editor provided by Sakura Editor Development Community contains an OS command injection vulnerability. If a victim user is directed to edit a file in a crafted directory, arbitrary OS command may be executed on the user's PC when the user invokes "Open Terminal". |
| Multiple DrayTek VigorAP models contain a command injection vulnerability in the setcamset function. The vulnerability is caused by insufficient filtering of the selectSlaves field before command execution. A remote attacker can trigger this vulnerability via crafted input to execute arbitrary commands with root privileges. Exploitation requires valid administrative credentials for the device's web management interface. |
| Multiple DrayTek VigorAP models contain a command injection vulnerability in the InquierTime function. The vulnerability is caused by insufficient filtering of the time field before command execution. A remote attacker can trigger this vulnerability via crafted input to execute arbitrary commands with root privileges. Exploitation requires valid administrative credentials for the device's web management interface. |
| An unauthenticated OS command injection vulnerability exists in the parental control functionality of Archer BE800 V1, BE3600 V1, and AX75 V1 due to improper filtering and neutralization of special characters in certain parameters. A LAN-based attacker can inject arbitrary commands and execute them with root privileges.
Successful exploitation may result in complete device compromise and impact the confidentiality, integrity, and availability of the affected device and network traffic. |
