| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When reading data from a hfs filesystem, grub's hfs filesystem module uses user-controlled parameters from the filesystem metadata to calculate the internal buffers size, however it misses to properly check for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculation to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result the hfsplus_open_compressed_real() function will write past of the internal buffer length. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution by-passing secure boot protections. |
| A flaw was found in grub2. Grub's dump command is not blocked when grub is in lockdown mode, which allows the user to read any memory information, and an attacker may leverage this in order to extract signatures, salts, and other sensitive information from the memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: reset per-IO canceled flag on each fetch
If a ublk server starts recovering devices but dies before issuing fetch
commands for all IOs, cancellation of the fetch commands that were
successfully issued may never complete. This is because the per-IO
canceled flag can remain set even after the fetch for that IO has been
submitted - the per-IO canceled flags for all IOs in a queue are reset
together only once all IOs for that queue have been fetched. So if a
nonempty proper subset of the IOs for a queue are fetched when the ublk
server dies, the IOs in that subset will never successfully be canceled,
as their canceled flags remain set, and this prevents ublk_cancel_cmd
from actually calling io_uring_cmd_done on the commands, despite the
fact that they are outstanding.
Fix this by resetting the per-IO cancel flags immediately when each IO
is fetched instead of waiting for all IOs for the queue (which may never
happen). |
| A flaw exists within the Linux kernel's handling of new TCP connections. The issue results from the lack of memory release after its effective lifetime. This vulnerability allows an unauthenticated attacker to create a denial of service condition on the system. |
| A missing permission check in Jenkins GitHub Branch Source Plugin 1967.1969.v205fd594c821 and earlier allows attackers with Overall/Read permission to obtain the URLs of GitHub Enterprise servers configured in the global plugin configuration. |
| An issue in the sqlo_key_part_best component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: jitterentropy - replace long-held spinlock with mutex
jent_kcapi_random() serializes the shared jitterentropy state, but it
currently holds a spinlock across the jent_read_entropy() call. That
path performs expensive jitter collection and SHA3 conditioning, so
parallel readers can trigger stalls as contending waiters spin for
the same lock.
To prevent non-preemptible lock hold, replace rng->jent_lock with a
mutex so contended readers sleep instead of spinning on a shared lock
held across expensive entropy generation. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Switch CONFIG_CFI_CLANG to CONFIG_CFI
This was renamed in commit 23ef9d439769 ("kcfi: Rename CONFIG_CFI_CLANG
to CONFIG_CFI") as it is now a compiler-agnostic option. Using the wrong
name results in the code getting compiled out. Meaning the CFI failures
for btf_dtor_kfunc_t would still trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: stop hash:* range iteration at end
The following hash set variants:
hash:ip,mark
hash:ip,port
hash:ip,port,ip
hash:ip,port,net
iterate IPv4 ranges with a 32-bit iterator.
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
vrf: Fix a potential NPD when removing a port from a VRF
RCU readers that identified a net device as a VRF port using
netif_is_l3_slave() assume that a subsequent call to
netdev_master_upper_dev_get_rcu() will return a VRF device. They then
continue to dereference its l3mdev operations.
This assumption is not always correct and can result in a NPD [1]. There
is no RCU synchronization when removing a port from a VRF, so it is
possible for an RCU reader to see a new master device (e.g., a bridge)
that does not have l3mdev operations.
Fix by adding RCU synchronization after clearing the IFF_L3MDEV_SLAVE
flag. Skip this synchronization when a net device is removed from a VRF
as part of its deletion and when the VRF device itself is deleted. In
the latter case an RCU grace period will pass by the time RTNL is
released.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
RIP: 0010:l3mdev_fib_table_rcu (net/l3mdev/l3mdev.c:181)
[...]
Call Trace:
<TASK>
l3mdev_fib_table_by_index (net/l3mdev/l3mdev.c:201 net/l3mdev/l3mdev.c:189)
__inet_bind (net/ipv4/af_inet.c:499 (discriminator 3))
inet_bind_sk (net/ipv4/af_inet.c:469)
__sys_bind (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:1951 (discriminator 1))
__x64_sys_bind (net/socket.c:1969 (discriminator 1) net/socket.c:1967 (discriminator 1) net/socket.c:1967 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) |
| In the Linux kernel, the following vulnerability has been resolved:
ipc/shm: serialize orphan cleanup with shm_nattch updates
shm_destroy_orphaned() walks the shm idr under shm_ids(ns).rwsem, but that
does not serialize all fields tested by shm_may_destroy(). In particular,
shm_nattch is updated while holding shm_perm.lock, and attach paths can do
that without holding the rwsem.
Do not decide that an orphaned segment is unused before taking the object
lock. Move the shm_may_destroy() check under shm_perm.lock, matching the
other destroy paths, and unlock the segment when it no longer qualifies
for removal. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix deadlock in remain-on-channel
mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel()
while already holding dev->mutex. Since mt76_set_channel() also acquires
dev->mutex, this results in a deadlock.
Use __mt76_set_channel() instead of mt76_set_channel().
Add cancel_delayed_work_sync() for mac_work before acquiring the mutex
in mt76_remain_on_channel() to prevent a secondary deadlock with the
mac_work workqueue. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix zones_cond memory leak on zone revalidation error paths
When blk_revalidate_disk_zones() fails after disk_revalidate_zone_resources()
has allocated args.zones_cond, the memory is leaked because no error path
frees it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix af_unix iter deadlock
bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast
path and the iter prog attempts to update a sockmap. Which ends up spinning
at sock_map_update_elem()'s bh_lock_sock():
WARNING: possible recursive locking detected
test_progs/1393 is trying to acquire lock:
ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0
but task is already holding lock:
ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(slock-AF_UNIX);
lock(slock-AF_UNIX);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by test_progs/1393:
#0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0
#1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0
#2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0
#3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00
Call Trace:
dump_stack_lvl+0x5d/0x80
print_deadlock_bug.cold+0xc0/0xce
__lock_acquire+0x130f/0x2590
lock_acquire+0x14e/0x2b0
_raw_spin_lock+0x30/0x40
sock_map_update_elem+0xdb/0x1f0
bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4
bpf_iter_run_prog+0x5b9/0xb00
bpf_iter_unix_seq_show+0x1f7/0x2e0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0x6b/0x3a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work()
When the mt7996 pci chip is detaching, the mt7996_crash_data is
released in mt7996_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7996_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7996_pci_remove() | mt7996_sys_recovery_set()
mt7996_unregister_device() | mt7996_reset()
mt7996_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7996_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7996_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix use-after-free bugs in mt7915_mac_dump_work()
When the mt7915 pci chip is detaching, the mt7915_crash_data is
released in mt7915_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7915_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7915_pci_remove() | mt7915_sys_recovery_set()
mt7915_unregister_device() | mt7915_reset()
mt7915_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7915_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7915_unregister_device() to synchronize with any pending
or executing dump work. |
| An issue in the st_compare component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements. |
| An issue in the t_set_push component of openlink virtuoso-opensource v7.2.11 allows attackers to cause a Denial of Service (DoS) via crafted SQL statements. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up by a couple of lines so that the
allocated dst SG list gets freed on error as well as success. |
| In the Linux kernel, the following vulnerability has been resolved:
tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an
uninitialised on-stack struct sockaddr_storage to userspace via
ifr_hwaddr, but netif_get_mac_address() only writes sa_family and
dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.
Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a
macvtap chardev returns kernel .text and direct-map pointers, defeating
KASLR.
Initialise ss at declaration. |
