| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl()
Yiming reports an integer underflow in mpi_read_raw_from_sgl() when
subtracting "lzeros" from the unsigned "nbytes".
For this to happen, the scatterlist "sgl" needs to occupy more bytes
than the "nbytes" parameter and the first "nbytes + 1" bytes of the
scatterlist must be zero. Under these conditions, the while loop
iterating over the scatterlist will count more zeroes than "nbytes",
subtract the number of zeroes from "nbytes" and cause the underflow.
When commit 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") originally
introduced the bug, it couldn't be triggered because all callers of
mpi_read_raw_from_sgl() passed a scatterlist whose length was equal to
"nbytes".
However since commit 63ba4d67594a ("KEYS: asymmetric: Use new crypto
interface without scatterlists"), the underflow can now actually be
triggered. When invoking a KEYCTL_PKEY_ENCRYPT system call with a
larger "out_len" than "in_len" and filling the "in" buffer with zeroes,
crypto_akcipher_sync_prep() will create an all-zero scatterlist used for
both the "src" and "dst" member of struct akcipher_request and thereby
fulfil the conditions to trigger the bug:
sys_keyctl()
keyctl_pkey_e_d_s()
asymmetric_key_eds_op()
software_key_eds_op()
crypto_akcipher_sync_encrypt()
crypto_akcipher_sync_prep()
crypto_akcipher_encrypt()
rsa_enc()
mpi_read_raw_from_sgl()
To the user this will be visible as a DoS as the kernel spins forever,
causing soft lockup splats as a side effect.
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results in a regression where the DHCP server fails on pmOS.
Use device_move to reparent the net_device between the gadget device and
/sys/devices/virtual/ across bind/unbind cycles. This preserves the
network interface across USB reconnection, allowing the DHCP server to
retain their binding.
Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use
__free(detach_gadget) macro to undo attachment on bind failure. The
bind_count ensures device_move executes only on the first bind.
[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/
[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/ |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-md5: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: require a full NFS mode SID before reading mode bits
parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS
mode SID and reads sid.sub_auth[2] to recover the mode bits.
That assumes the ACE carries three subauthorities, but compare_sids()
only compares min(a, b) subauthorities. A malicious server can return
an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still
matches sid_unix_NFS_mode and then drives the sub_auth[2] read four
bytes past the end of the ACE.
Require num_subauth >= 3 before treating the ACE as an NFS mode SID.
This keeps the fix local to the special-SID mode path without changing
compare_sids() semantics for the rest of cifsacl. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ipv6: ioam6: prevent schema length wraparound in trace fill
ioam6_fill_trace_data() stores the schema contribution to the trace
length in a u8. With bit 22 enabled and the largest schema payload,
sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the
remaining-space check. __ioam6_fill_trace_data() then positions the
write cursor without reserving the schema area but still copies the
4-byte schema header and the full schema payload, overrunning the trace
buffer.
Keep sclen in an unsigned int so the remaining-space check and the write
cursor calculation both see the full schema length. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: Disable KCOV instrumentation after load_segments()
The load_segments() function changes segment registers, invalidating GS base
(which KCOV relies on for per-cpu data). When CONFIG_KCOV is enabled, any
subsequent instrumented C code call (e.g. native_gdt_invalidate()) begins
crashing the kernel in an endless loop.
To reproduce the problem, it's sufficient to do kexec on a KCOV-instrumented
kernel:
$ kexec -l /boot/otherKernel
$ kexec -e
The real-world context for this problem is enabling crash dump collection in
syzkaller. For this, the tool loads a panic kernel before fuzzing and then
calls makedumpfile after the panic. This workflow requires both CONFIG_KEXEC
and CONFIG_KCOV to be enabled simultaneously.
Adding safeguards directly to the KCOV fast-path (__sanitizer_cov_trace_pc())
is also undesirable as it would introduce an extra performance overhead.
Disabling instrumentation for the individual functions would be too fragile,
so disable KCOV instrumentation for the entire machine_kexec_64.c and
physaddr.c. If coverage-guided fuzzing ever needs these components in the
future, other approaches should be considered.
The problem is not relevant for 32 bit kernels as CONFIG_KCOV is not supported
there.
[ bp: Space out comment for better readability. ] |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: pmc: Fix unsafe generic_handle_irq() call
Currently, when resuming from system suspend on Tegra platforms,
the following warning is observed:
WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666
Call trace:
handle_irq_desc+0x20/0x58 (P)
tegra186_pmc_wake_syscore_resume+0xe4/0x15c
syscore_resume+0x3c/0xb8
suspend_devices_and_enter+0x510/0x540
pm_suspend+0x16c/0x1d8
The warning occurs because generic_handle_irq() is being called from
a non-interrupt context which is considered as unsafe.
Fix this warning by deferring generic_handle_irq() call to an IRQ work
which gets executed in hard IRQ context where generic_handle_irq()
can be called safely.
When PREEMPT_RT kernels are used, regular IRQ work (initialized with
init_irq_work) is deferred to run in per-CPU kthreads in preemptible
context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD
variant so that with PREEMPT_RT kernels, the IRQ work is processed in
hardirq context instead of being deferred to a thread which is required
for calling generic_handle_irq().
On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD()
execute in IRQ context, so this change has no functional impact for
standard kernel configurations.
[treding@nvidia.com: miscellaneous cleanups] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: clear page->private in free_pages_prepare()
Several subsystems (slub, shmem, ttm, etc.) use page->private but don't
clear it before freeing pages. When these pages are later allocated as
high-order pages and split via split_page(), tail pages retain stale
page->private values.
This causes a use-after-free in the swap subsystem. The swap code uses
page->private to track swap count continuations, assuming freshly
allocated pages have page->private == 0. When stale values are present,
swap_count_continued() incorrectly assumes the continuation list is valid
and iterates over uninitialized page->lru containing LIST_POISON values,
causing a crash:
KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107]
RIP: 0010:__do_sys_swapoff+0x1151/0x1860
Fix this by clearing page->private in free_pages_prepare(), ensuring all
freed pages have clean state regardless of previous use. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: add a sanity check on previous kernel's ima kexec buffer
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>", the physical range that contains the carried
over IMA measurement list may fall outside the truncated RAM leading to a
kernel panic.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) – not-present page
Other architectures already validate the range with page_is_ram(), as done
in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds") do a similar check on x86.
Without carrying the measurement list across kexec, the attestation
would fail. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: Fix potential unregister of netdev that has not been registered yet
If an error occurs during register_netdev() for the first MAC in
cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL,
cpsw->slaves[1].ndev would remain unchanged. This could later cause
cpsw_unregister_ports() to attempt unregistering the second MAC.
To address this, add a check for ndev->reg_state before calling
unregister_netdev(). With this change, setting cpsw->slaves[i].ndev
to NULL becomes unnecessary and can be removed accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: verify the previous kernel's IMA buffer lies in addressable RAM
Patch series "Address page fault in ima_restore_measurement_list()", v3.
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>" we observe a pafe fault that happens.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) not-present page
This happens on x86_64 only, as this is already fixed in aarch64 in
commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds")
This patch (of 3):
When the second-stage kernel is booted with a limiting command line (e.g.
"mem=<size>"), the IMA measurement buffer handed over from the previous
kernel may fall outside the addressable RAM of the new kernel. Accessing
such a buffer can fault during early restore.
Introduce a small generic helper, ima_validate_range(), which verifies
that a physical [start, end] range for the previous-kernel IMA buffer lies
within addressable memory:
- On x86, use pfn_range_is_mapped().
- On OF based architectures, use page_is_ram(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ensure safe access to master conntrack
Holding reference on the expectation is not sufficient, the master
conntrack object can just go away, making exp->master invalid.
To access exp->master safely:
- Grab the nf_conntrack_expect_lock, this gets serialized with
clean_from_lists() which also holds this lock when the master
conntrack goes away.
- Hold reference on master conntrack via nf_conntrack_find_get().
Not so easy since the master tuple to look up for the master conntrack
is not available in the existing problematic paths.
This patch goes for extending the nf_conntrack_expect_lock section
to address this issue for simplicity, in the cases that are described
below this is just slightly extending the lock section.
The add expectation command already holds a reference to the master
conntrack from ctnetlink_create_expect().
However, the delete expectation command needs to grab the spinlock
before looking up for the expectation. Expand the existing spinlock
section to address this to cover the expectation lookup. Note that,
the nf_ct_expect_iterate_net() calls already grabs the spinlock while
iterating over the expectation table, which is correct.
The get expectation command needs to grab the spinlock to ensure master
conntrack does not go away. This also expands the existing spinlock
section to cover the expectation lookup too. I needed to move the
netlink skb allocation out of the spinlock to keep it GFP_KERNEL.
For the expectation events, the IPEXP_DESTROY event is already delivered
under the spinlock, just move the delivery of IPEXP_NEW under the
spinlock too because the master conntrack event cache is reached through
exp->master.
While at it, add lockdep notations to help identify what codepaths need
to grab the spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the
station exists but not whether it is actually a TDLS station. This
allows the operation to proceed for non-TDLS stations, causing
unintended side effects like modifying channel context and HT
protection before failing.
Add a check for sta->sta.tdls early in the ENABLE_LINK case, before
any side effects occur, to ensure the operation is only allowed for
actual TDLS peers. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync
hci_conn lookup and field access must be covered by hdev lock in
set_cig_params_sync, otherwise it's possible it is freed concurrently.
Take hdev lock to prevent hci_conn from being deleted or modified
concurrently. Just RCU lock is not suitable here, as we also want to
avoid "tearing" in the configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_ether: Fix NULL pointer deref in eth_get_drvinfo
Commit ec35c1969650 ("usb: gadget: f_ncm: Fix net_device lifecycle with
device_move") reparents the gadget device to /sys/devices/virtual during
unbind, clearing the gadget pointer. If the userspace tool queries on
the surviving interface during this detached window, this leads to a
NULL pointer dereference.
Unable to handle kernel NULL pointer dereference
Call trace:
eth_get_drvinfo+0x50/0x90
ethtool_get_drvinfo+0x5c/0x1f0
__dev_ethtool+0xaec/0x1fe0
dev_ethtool+0x134/0x2e0
dev_ioctl+0x338/0x560
Add a NULL check for dev->gadget in eth_get_drvinfo(). When detached,
skip copying the fw_version and bus_info strings, which is natively
handled by ethtool_get_drvinfo for empty strings. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: iput(sbi->node_inode)
: sbi->node_inode = NULL
: f2fs_in_warm_node_list
- is_node_folio // sbi->node_inode is NULL and panic
The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and
sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is
decremented to zero. As a result, f2fs_in_warm_node_list() may
dereference a NULL node_inode when checking whether a folio belongs to
the node inode, leading to a panic.
This patch fixes the issue by calling f2fs_in_warm_node_list() before
decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the
use-after-free condition. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require minimum ACE size in smb_check_perm_dacl()
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix active_num_conn leak on transport allocation failure
Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept. |
