| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader
Versions Affected:
before 2.5.9
before 3.0.0-M3
Description:
The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source.
A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load.
The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins.
Mitigation:
* 2.x users should upgrade to 2.5.9.
* 3.x users should upgrade to 3.0.0-M3.
Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default.
Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. |
| A Time-of-Check to Time-of-Use (TOCTOU) race condition exists in the mkfifo utility of uutils coreutils. The utility creates a FIFO and then performs a path-based chmod to set permissions. A local attacker with write access to the parent directory can swap the newly created FIFO for a symbolic link between these two operations. This redirects the chmod call to an arbitrary file, potentially enabling privilege escalation if the utility is run with elevated privileges. |
| A NULL pointer dereference in mod_dav_lock in Apache HTTP Server 2.4.66 and earlier may allow an attacker to crash the server with a malicious request.mod_dav_lock is not used internally by mod_dav or mod_dav_fs.
The only known use-case for mod_dav_lock was mod_dav_svn from Apache Subversion earlier than version 1.2.0.
Users are recommended to upgrade to version 2.4.66, which fixes this issue, or remove mod_dav_lock. |
| strongSwan versions 4.5.0 prior to 6.0.5 contain an integer underflow vulnerability in the EAP-TTLS AVP parser that allows unauthenticated remote attackers to cause a denial of service by sending crafted AVP data with invalid length fields during IKEv2 authentication. Attackers can exploit the failure to validate AVP length fields before subtraction to trigger excessive memory allocation or NULL pointer dereference, crashing the charon IKE daemon. |
| Memory Corruption when copying data from a freed source while executing performance counter deselect operation. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage. |
| BusyBox before commit 42202bf contains a heap buffer overflow vulnerability in the DHCPv6 client (udhcpc6) DNS_SERVERS option handler in networking/udhcp/d6_dhcpc.c that allows network-adjacent attackers to trigger memory corruption by sending a crafted DHCPv6 response with a malformed D6_OPT_DNS_SERVERS option. Attackers can exploit incorrect heap buffer allocation calculations in the option_to_env() function to cause denial of service or achieve arbitrary code execution on embedded systems without heap hardening. |
| A flaw has been found in ChatGPTNextWeb NextChat up to 2.16.1. This impacts an unknown function of the file Next.js of the component API Endpoint. Executing a manipulation can lead to permissive cross-domain policy with untrusted domains. The attack may be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in kleneway awesome-cursor-mpc-server up to 2.0.1. Impacted is the function runCodeReviewTool of the file src/tools/codeReview.ts of the component Ccode-Review Tool. Executing a manipulation can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through a pull request but has not reacted yet. |
| An issue in Assimp v.6.0.2 allows a remote attacker to cause a denial of service via the FBXConverter.cpp, FBXConverter::ConvertMeshMultiMaterial() components |
| The deprecated functions ns_printrrf, ns_printrr and fp_nquery in the GNU C Library version 2.2 and newer fail to validate the RDATA content against the RDATA length in a DNS response when processing LOC, CERT, TKEY or TSIG records, which may allow an attacker to craft a DNS response, causing a target application to crash or read uninitialized memory.
These functions are for application debugging only and hence not in the path of code executed by the DNS resolver. Further, they have been deprecated since version 2.34 and should not be used by any new applications. Applications should consider porting away from these interfaces since they may be removed in future versions. |
| A security vulnerability has been detected in Sunwood-ai-labs command-executor-mcp-server up to 0.1.0. This impacts the function execute_command of the file src/index.ts of the component MCP Interface. The manipulation leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in Dayoooun hwpx-mcp 0.2.0. This affects the function save_document/export_to_text/export_to_html of the file mcp-server/src/index.ts of the component MCP Interface. Performing a manipulation of the argument output_path results in path traversal. Remote exploitation of the attack is possible. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Memory corruption while creating a process on the digital signal processor due to allocation failure at the kernel level. |
| The Import and export users and customers plugin for WordPress is vulnerable to Privilege Escalation in all versions up to and including 2.0.8 via the `save_extra_user_profile_fields()` function. This is due to an incomplete blocklist that correctly restricts capability meta keys for the primary site (e.g., `wp_capabilities`, `wp_user_level`) but fails to block the equivalent meta keys for any other subsite in a WordPress Multisite network (e.g., `wp_2_capabilities`, `wp_2_user_level`), allowing these keys to pass the `in_array()` check and be written directly to user meta via `update_user_meta()`. This makes it possible for authenticated attackers, with Subscriber-level access and above, to escalate their privileges to Administrator on any subsite within the Multisite network by submitting a crafted profile update to `/wp-admin/profile.php`. Exploitation requires that an administrator has previously imported a CSV file containing multisite-prefixed capability column headers and has enabled the 'Show fields in profile?' option, which causes those keys to be stored in the `acui_columns` option and exposed as editable fields on the user profile page. |
| The Widgets for Social Photo Feed plugin for WordPress is vulnerable to unauthorized access of data and modification of data due to a missing capability check on the '/trustindex_feed_hook_instagram/troubleshooting' and '/trustindex_feed_hook_instagram/submit-data' REST API endpoints in all versions up to, and including, 1.8. This makes it possible for unauthenticated attackers to access and update plugin settings. |
| The Call for Price for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 4.2.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| A security flaw has been discovered in JeecgBoot up to 3.9.1. This vulnerability affects the function CommonController.uploadImgByHttp/HttpFileToMultipartFileUtil.httpFileToMultipartFile/HttpFileToMultipartFileUtil.downloadImageData of the file CommonController.java of the component uploadImgByHttpEndpoint. Performing a manipulation results in server-side request forgery. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. Upgrading the affected component is recommended. The vendor confirmed the issue and will provide a fix in the upcoming release. |
| The Brizy – Page Builder plugin for WordPress is vulnerable to Unauthenticated Stored Cross-Site Scripting in all versions up to, and including, 2.8.11 This is due to a combination of missing nonce verification for unauthenticated form submissions, insufficient handling of FileUpload fields when no file is uploaded, and the reversal of security encoding via html_entity_decode() followed by unescaped output in the admin view. The submit_form() function skips nonce verification for non-logged-in users (api.php:198). The handleFileTypeFields() function fails to overwrite user-supplied values when no file is attached. While htmlentities() is applied during storage, html_entity_decode() reverses this on display (form-entries.php:79). The form-data.php template outputs FileUpload values directly in href attributes without esc_url(). This makes it possible for unauthenticated attackers to inject arbitrary web scripts that execute when an administrator views the form Leads page. |
| A vulnerability was found in TRENDnet TEW-821DAP up to 1.12B01. This impacts the function platform_do_upgrade_cameo_dev of the file cameo_dev.sh of the component Firmware Update Handler. Performing a manipulation results in insufficient verification of data authenticity. The attack is possible to be carried out remotely. The complexity of an attack is rather high. The exploitability is said to be difficult. The vendor explains: "That firmware version will only work on our hardware version v1.xR. We have already EOL that product 8 years ago and are no longer selling". This vulnerability only affects products that are no longer supported by the maintainer. |
