| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: Work around LLVM bug when gp is used as global register variable
On MIPS, __current_thread_info is defined as global register variable
locating in $gp, and is simply assigned with new address during kernel
relocation.
This however is broken with LLVM, which always restores $gp if it finds
$gp is clobbered in any form, including when intentionally through a
global register variable. This is against GCC's documentation[1], which
requires a callee-saved register used as global register variable not to
be restored if it's clobbered.
As a result, $gp will continue to point to the unrelocated kernel after
the epilog of relocate_kernel(), leading to an early crash in init_idle,
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY
[ 0.000000] Tainted: [W]=WARN
[ 0.000000] Hardware name: loongson,loongson64v-4core-virtio
[ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240
[ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001
[ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002
[ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80
[ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80
[ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90
[ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90
[ 0.000000] Hi : 0000000000000000
[ 0.000000] Lo : 0000000000000000
[ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270
[ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270
[ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL
[ 0.000000] Cause : 00000008 (ExcCode 02)
[ 0.000000] BadVA : 0000000000000000
[ 0.000000] PrId : 00006305 (ICT Loongson-3)
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
[ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528
[ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000
[ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258
[ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98
[ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81afada8>] init_idle+0x130/0x270
[ 0.000000] [<ffffffff81afb6c0>] sched_init+0x5c8/0x6c0
[ 0.000000] [<ffffffff81ae86dc>] start_kernel+0x27c/0x7a8
This bug has been reported to LLVM[2] and affects version from (at
least) 18 to 21. Let's work around this by using inline assembly to
assign $gp before a fix is widely available. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix block_group_tree dirty_list corruption
When the incompat flag EXTENT_TREE_V2 is set, we unconditionally add the
block group tree to the switch_commits list before calling
switch_commit_roots, as we do for the tree root and the chunk root.
However, the block group tree uses normal root dirty tracking and in any
transaction that does an allocation and dirties a block group, the block
group root will already be linked to a list by the dirty_list field and
this use of list_add_tail() is invalid and corrupts the prev/next
members of block_group_root->dirty_list.
This is apparent on a subsequent list_del on the prev if we enable
CONFIG_DEBUG_LIST:
[32.1571] ------------[ cut here ]------------
[32.1572] list_del corruption. next->prev should beffff958890202538, but was ffff9588992bd538. (next=ffff958890201538)
[32.1575] WARNING: lib/list_debug.c:65 at 0x0, CPU#3: sync/607
[32.1583] CPU: 3 UID: 0 PID: 607 Comm: sync Not tainted 6.18.0 #24PREEMPT(none)
[32.1585] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS1.17.0-4.fc41 04/01/2014
[32.1587] RIP: 0010:__list_del_entry_valid_or_report+0x108/0x120
[32.1593] RSP: 0018:ffffaa288287fdd0 EFLAGS: 00010202
[32.1594] RAX: 0000000000000001 RBX: ffff95889326e800 RCX:ffff958890201538
[32.1596] RDX: ffff9588992bd538 RSI: ffff958890202538 RDI:ffffffff82a41e00
[32.1597] RBP: ffff958890202538 R08: ffffffff828fc1e8 R09:00000000ffffefff
[32.1599] R10: ffffffff8288c200 R11: ffffffff828e4200 R12:ffff958890201538
[32.1601] R13: ffff95889326e958 R14: ffff958895c24000 R15:ffff958890202538
[32.1603] FS: 00007f0c28eb5740(0000) GS:ffff958af2bd2000(0000)knlGS:0000000000000000
[32.1605] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[32.1607] CR2: 00007f0c28e8a3cc CR3: 0000000109942005 CR4:0000000000370ef0
[32.1609] Call Trace:
[32.1610] <TASK>
[32.1611] switch_commit_roots+0x82/0x1d0 [btrfs]
[32.1615] btrfs_commit_transaction+0x968/0x1550 [btrfs]
[32.1618] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs]
[32.1621] __iterate_supers+0xe8/0x190
[32.1622] ? __pfx_sync_fs_one_sb+0x10/0x10
[32.1623] ksys_sync+0x63/0xb0
[32.1624] __do_sys_sync+0xe/0x20
[32.1625] do_syscall_64+0x73/0x450
[32.1626] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[32.1627] RIP: 0033:0x7f0c28d05d2b
[32.1632] RSP: 002b:00007ffc9d988048 EFLAGS: 00000246 ORIG_RAX:00000000000000a2
[32.1634] RAX: ffffffffffffffda RBX: 00007ffc9d988228 RCX:00007f0c28d05d2b
[32.1636] RDX: 00007f0c28e02301 RSI: 00007ffc9d989b21 RDI:00007f0c28dba90d
[32.1637] RBP: 0000000000000001 R08: 0000000000000001 R09:0000000000000000
[32.1639] R10: 0000000000000000 R11: 0000000000000246 R12:000055b96572cb80
[32.1641] R13: 000055b96572b19f R14: 00007f0c28dfa434 R15:000055b96572b034
[32.1643] </TASK>
[32.1644] irq event stamp: 0
[32.1644] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[32.1646] hardirqs last disabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1648] softirqs last enabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1650] softirqs last disabled at (0): [<0000000000000000>] 0x0
[32.1652] ---[ end trace 0000000000000000 ]---
Furthermore, this list corruption eventually (when we happen to add a
new block group) results in getting the switch_commits and
dirty_cowonly_roots lists mixed up and attempting to call update_root
on the tree root which can't be found in the tree root, resulting in a
transaction abort:
[87.8269] BTRFS critical (device nvme1n1): unable to find root key (1 0 0) in tree 1
[87.8272] ------------[ cut here ]------------
[87.8274] BTRFS: Transaction aborted (error -117)
[87.8275] WARNING: fs/btrfs/root-tree.c:153 at 0x0, CPU#4: sync/703
[87.8285] CPU: 4 UID: 0 PID: 703 Comm: sync Not tainted 6.18.0 #25 PREEMPT(none)
[87.8287] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-4.fc41 0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Fix PF driver crash with kexec kernel booting
During a kexec reboot the hardware is not power-cycled, so AF state from
the old kernel can persist into the new kernel. When AF and PF drivers
are built as modules, the PF driver may probe before AF reinitializes
the hardware.
The PF driver treats the RVUM block revision as an indication that AF
initialization is complete. If this value is left uncleared at shutdown,
PF may incorrectly assume AF is ready and access stale hardware state,
leading to a crash.
Clear the RVUM block revision during AF shutdown to avoid PF
mis-detecting AF readiness after kexec. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: clear stale link mapping of ahvif->links_map
When an arvif is initialized in non-AP STA mode but MLO connection
preparation fails before the arvif is created
(arvif->is_created remains false), the error path attempts to delete all
links. However, link deletion only executes when arvif->is_created is true.
As a result, ahvif retains a stale entry of arvif that is initialized but
not created.
When a new arvif is initialized with the same link id, this stale mapping
triggers the following WARN_ON.
WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275
Call trace:
ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P)
drv_change_vif_links+0xbc/0x1a4 [mac80211]
ieee80211_vif_update_links+0x54c/0x6a0 [mac80211]
ieee80211_vif_set_links+0x40/0x70 [mac80211]
ieee80211_prep_connection+0x84/0x450 [mac80211]
ieee80211_mgd_auth+0x200/0x480 [mac80211]
ieee80211_auth+0x14/0x20 [mac80211]
cfg80211_mlme_auth+0x90/0xf0 [cfg80211]
nl80211_authenticate+0x32c/0x380 [cfg80211]
genl_family_rcv_msg_doit+0xc8/0x134
Fix this issue by unassigning the link vif and clearing ahvif->links_map
if arvif is only initialized but not created.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gfx3d: add parent to parent request map
After commit d228ece36345 ("clk: divider: remove round_rate() in favor
of determine_rate()") determining GFX3D clock rate crashes, because the
passed parent map doesn't provide the expected best_parent_hw clock
(with the roundd_rate path before the offending commit the
best_parent_hw was ignored).
Set the field in parent_req in addition to setting it in the req,
fixing the crash.
clk_hw_round_rate (drivers/clk/clk.c:1764) (P)
clk_divider_bestdiv (drivers/clk/clk-divider.c:336)
divider_determine_rate (drivers/clk/clk-divider.c:358)
clk_alpha_pll_postdiv_determine_rate (drivers/clk/qcom/clk-alpha-pll.c:1275)
clk_core_determine_round_nolock (drivers/clk/clk.c:1606)
clk_core_round_rate_nolock (drivers/clk/clk.c:1701)
__clk_determine_rate (drivers/clk/clk.c:1741)
clk_gfx3d_determine_rate (drivers/clk/qcom/clk-rcg2.c:1268)
clk_core_determine_round_nolock (drivers/clk/clk.c:1606)
clk_core_round_rate_nolock (drivers/clk/clk.c:1701)
clk_core_round_rate_nolock (drivers/clk/clk.c:1710)
clk_round_rate (drivers/clk/clk.c:1804)
dev_pm_opp_set_rate (drivers/opp/core.c:1440 (discriminator 1))
msm_devfreq_target (drivers/gpu/drm/msm/msm_gpu_devfreq.c:51)
devfreq_set_target (drivers/devfreq/devfreq.c:360)
devfreq_update_target (drivers/devfreq/devfreq.c:426)
devfreq_monitor (drivers/devfreq/devfreq.c:458)
process_one_work (arch/arm64/include/asm/jump_label.h:36 include/trace/events/workqueue.h:110 kernel/workqueue.c:3284)
worker_thread (kernel/workqueue.c:3356 (discriminator 2) kernel/workqueue.c:3443 (discriminator 2))
kthread (kernel/kthread.c:467)
ret_from_fork (arch/arm64/kernel/entry.S:861) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: Fix IPv6 inner_thoff desync
In nft_inner_parse_l2l3(), when processing inner IPv6 packets,
ipv6_find_hdr() correctly computes the transport header offset
traversing all extension headers, but the result is immediately
overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only
accounts for the IPv6 base header. This creates a desync between
inner_thoff (wrong — points to extension header start) and l4proto
(correct — e.g., IPPROTO_TCP), enabling transport header forgery
and potential firewall bypass. This issue affects stable versions
from Linux 6.2.
For comparison, the normal (non-inner) IPv6 path correctly
preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite
ensures that ipv6_find_hdr()'s calculated transport header offset is
preserved, thereby fixing the desynchronization. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Recover from panthor_gpu_flush_caches() failures
We have seen a few cases where the whole memory subsystem is blocked
and flush operations never complete. When that happens, we want to:
- schedule a reset, so we can recover from this situation
- in the reset path, we need to reset the pending_reqs so we can send
new commands after the reset
- if more panthor_gpu_flush_caches() operations are queued after
the timeout, we skip them and return -EIO directly to avoid needless
waits (the memory block won't miraculously work again)
Note that we drop the WARN_ON()s because these hangs can be triggered
with buggy GPU jobs created by the UMD, and there's no way we can
prevent it. We do keep the error messages though.
v2:
- New patch
v3:
- Collect R-b
- Explicitly mention the fact we dropped the WARN_ON()s in the commit
message
v4:
- No changes |
| In the Linux kernel, the following vulnerability has been resolved:
AppArmor: Allow apparmor to handle unaligned dfa tables
The dfa tables can originate from kernel or userspace and 8-byte alignment
isn't always guaranteed and as such may trigger unaligned memory accesses
on various architectures. Resulting in the following
[ 73.901376] WARNING: CPU: 0 PID: 341 at security/apparmor/match.c:316 aa_dfa_unpack+0x6cc/0x720
[ 74.015867] Modules linked in: binfmt_misc evdev flash sg drm drm_panel_orientation_quirks backlight i2c_core configfs nfnetlink autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid sr_mod hid cdrom
sd_mod ata_generic ohci_pci ehci_pci ehci_hcd ohci_hcd pata_ali libata sym53c8xx scsi_transport_spi tg3 scsi_mod usbcore libphy scsi_common mdio_bus usb_common
[ 74.428977] CPU: 0 UID: 0 PID: 341 Comm: apparmor_parser Not tainted 6.18.0-rc6+ #9 NONE
[ 74.536543] Call Trace:
[ 74.568561] [<0000000000434c24>] dump_stack+0x8/0x18
[ 74.633757] [<0000000000476438>] __warn+0xd8/0x100
[ 74.696664] [<00000000004296d4>] warn_slowpath_fmt+0x34/0x74
[ 74.771006] [<00000000008db28c>] aa_dfa_unpack+0x6cc/0x720
[ 74.843062] [<00000000008e643c>] unpack_pdb+0xbc/0x7e0
[ 74.910545] [<00000000008e7740>] unpack_profile+0xbe0/0x1300
[ 74.984888] [<00000000008e82e0>] aa_unpack+0xe0/0x6a0
[ 75.051226] [<00000000008e3ec4>] aa_replace_profiles+0x64/0x1160
[ 75.130144] [<00000000008d4d90>] policy_update+0xf0/0x280
[ 75.201057] [<00000000008d4fc8>] profile_replace+0xa8/0x100
[ 75.274258] [<0000000000766bd0>] vfs_write+0x90/0x420
[ 75.340594] [<00000000007670cc>] ksys_write+0x4c/0xe0
[ 75.406932] [<0000000000767174>] sys_write+0x14/0x40
[ 75.472126] [<0000000000406174>] linux_sparc_syscall+0x34/0x44
[ 75.548802] ---[ end trace 0000000000000000 ]---
[ 75.609503] dfa blob stream 0xfff0000008926b96 not aligned.
[ 75.682695] Kernel unaligned access at TPC[8db2a8] aa_dfa_unpack+0x6e8/0x720
Work around it by using the get_unaligned_xx() helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
The clocks in fsl_edma_engine::muxclk are allocated and enabled with
devm_clk_get_enabled(), which automatically cleans these resources up,
but these clocks are also manually disabled in fsl_edma_remove(). This
causes warnings on driver removal for each clock:
edma_module already disabled
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8
[...]
Call trace:
clk_core_disable+0x198/0x1c8 (P)
clk_disable+0x34/0x58
fsl_edma_remove+0x74/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
edma_module already unprepared
WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220
[...]
Call trace:
clk_core_unprepare+0x1f8/0x220 (P)
clk_unprepare+0x34/0x58
fsl_edma_remove+0x7c/0xe8 [fsl_edma]
[...]
---[ end trace 0000000000000000 ]---
Fix these warnings by removing the unnecessary fsl_disable_clocks() call
in fsl_edma_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
When reading /proc/[pid]/stat, do_task_stat() accesses task->real_parent
without proper RCU protection, which leads to:
cpu 0 cpu 1
----- -----
do_task_stat
var = task->real_parent
release_task
call_rcu(delayed_put_task_struct)
task_tgid_nr_ns(var)
rcu_read_lock <--- Too late to protect task->real_parent!
task_pid_ptr <--- UAF!
rcu_read_unlock
This patch uses task_ppid_nr_ns() instead of task_tgid_nr_ns() to add
proper RCU protection for accessing task->real_parent. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: do WoW offloads only on primary link
In case of multi-link connection, WCN7850 firmware crashes due to WoW
offloads enabled on both primary and secondary links.
Change to do it only on primary link to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/P2PDMA: Fix p2pmem_alloc_mmap() warning condition
Commit b7e282378773 has already changed the initial page refcount of
p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses
"VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page
refcount should not be zero and the following will be reported when
CONFIG_DEBUG_VM is enabled:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000
flags: 0x20000000002000(reserved|node=0|zone=4)
raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))
------------[ cut here ]------------
WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60
Fix by using "page_ref_count(page)" as the assertion condition. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix WQ_MEM_RECLAIM warning
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM. |
| Inappropriate implementation in Guest View in Google Chrome prior to 149.0.7827.103 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| Windows Remote Desktop Services Denial of Service Vulnerability |
| Wireless Wide Area Network Service (WwanSvc) Elevation of Privilege Vulnerability |
| Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| Windows Lightweight Directory Access Protocol (LDAP) Denial of Service Vulnerability |
| Windows Lightweight Directory Access Protocol (LDAP) Remote Code Execution Vulnerability |
