| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered in Django 6.0 before 6.0.7 and 5.2 before 5.2.16.
`django.contrib.gis.gdal.GDALRaster` over-reads its in-memory buffer when constructed from a bytes object, which can disclose adjacent memory or cause service degradation via a potential segmentation fault when the `vsi_buffer` property is accessed.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Bence Nagy for reporting this issue. |
| Local attackers with a X connection able to provide PCX fonts to the X
server xorg-server before 21.2.24 and xwayland before 24.1.13 could
cause a heap buffer overflow via SetFont due to missing glyph boundary checks. |
| A vulnerability was determined in llvm llvm-project up to 22.1.6. This impacts the function GCRelocateInst::getBasePtr in the library llvm/lib/IR/IntrinsicInst.cpp of the component Bitcode File Handler. This manipulation causes heap-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. There are still doubts about whether this vulnerability truly exists. The LLVM project explains, that the reported behavior is outside its documented security scope and therefore not considered a security vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate advertising TLV before type checks
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1]. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Do not try to iommu_map a 0 length region in swiotlb
iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three
parts, the head, middle and trailer. If the middle is empty because there
are no aligned pages it will call down to iommu_map() with a 0 size
which the iommupt implementation will fail as illegal.
It then tries to do an error unwind and starts from the wrong spot
corrupting the mapping so the eventual destruction triggers a WARN_ON.
Check for 0 length and avoid mapping and use offset not 0 as the starting
point to unlink.
This is frequently triggered by using some kinds of thunderbolt NVMe
drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to
pass in oddly aligned buffers for the passthrough commands from smartctl
that hit this condition. |
| The fix for CVE-2026-2443 was regressed by a subsequent rework commit that replaced specific overflow checks with a general signed comparison. When a client sends a Range request with a suffix length exceeding the content size, the resulting negative start value is not properly clamped, leading to malformed HTTP 206 responses and log flooding. |
| Socket versions before 2.041 for Perl have an out-of-bounds heap read.
In Socket.xs, pack_ip_mreq_source() checks the length of its source argument before the argument is read, so the check tests the byte length carried over from the preceding multiaddr argument instead. Both addresses occupy a 4-byte field, so a valid multiaddr lets a source of any length pass the check, and the source is then copied into the 4-byte imr_sourceaddr field with a fixed-size copy. A source shorter than 4 bytes is not rejected, and the copy reads up to 3 bytes past the end of its buffer.
Calling pack_ip_mreq_source() with a source value shorter than 4 bytes copies adjacent heap memory into the returned packed structure. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix the out-of-bounds nameoff handling for trailing dirents
Currently we already have boundary-checks for nameoffs, but the trailing
dirents are special since the namelens are calculated with strnlen()
with unchecked nameoffs.
If a crafted EROFS has a trailing dirent with nameoff >= maxsize,
maxsize - nameoff can underflow, causing strnlen() to read past the
directory block.
nameoff0 should also be verified to be a multiple of
`sizeof(struct erofs_dirent)` as well [1].
[1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com |
| In the Linux kernel, the following vulnerability has been resolved:
ima: verify the previous kernel's IMA buffer lies in addressable RAM
Patch series "Address page fault in ima_restore_measurement_list()", v3.
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>" we observe a pafe fault that happens.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) not-present page
This happens on x86_64 only, as this is already fixed in aarch64 in
commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds")
This patch (of 3):
When the second-stage kernel is booted with a limiting command line (e.g.
"mem=<size>"), the IMA measurement buffer handed over from the previous
kernel may fall outside the addressable RAM of the new kernel. Accessing
such a buffer can fault during early restore.
Introduce a small generic helper, ima_validate_range(), which verifies
that a physical [start, end] range for the previous-kernel IMA buffer lies
within addressable memory:
- On x86, use pfn_range_is_mapped().
- On OF based architectures, use page_is_ram(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path
smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL
and the default QUERY_INFO path. The QUERY_INFO branch clamps
qi.input_buffer_length to the server-reported OutputBufferLength and then
copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but
it never verifies that the flexible-array payload actually fits within
rsp_iov[1].iov_len.
A malicious server can return OutputBufferLength larger than the actual
QUERY_INFO response, causing copy_to_user() to walk past the response
buffer and expose adjacent kernel heap to userspace.
Guard the QUERY_INFO copy with a bounds check on the actual Buffer
payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length)
rather than an open-coded addition so the guard cannot overflow on
32-bit builds. |
| A flaw was found in the GNOME localsearch (previously known as tracker-miners) MP3 Extractor `tracker-extract-mp3` component. A remote attacker could exploit this heap buffer overflow vulnerability by providing a specially crafted MP3 file containing malformed ID3 tags. This incorrect length calculation during the parsing of performer tags can lead to a read beyond the allocated buffer, potentially causing a Denial of Service (DoS) due to a crash or enabling information disclosure. |
| A flaw was found in GNOME localsearch (previously known as tracker-miners) MP3 Extractor, specifically within the tracker-extract-mp3 component. This heap buffer overflow vulnerability occurs when processing specially crafted MP3 files containing malformed ID3v2.3 COMM (Comment) tags. An attacker could exploit this by providing a malicious MP3 file, leading to a denial of service (DoS), which causes an application crash, and potentially disclosing sensitive information from the heap memory. |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: validate rx pkt_type header length
virtbt_rx_handle() reads the leading pkt_type byte from the RX skb
and forwards the remainder to hci_recv_frame() for every
event/ACL/SCO/ISO type, without checking that the remaining payload
is at least the fixed HCI header for that type.
After the preceding patch bounds the backend-supplied used.len to
[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches
hci_recv_frame() with skb->len already pulled to 0. If the byte
happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification
fast-path in hci_dev_classify_pkt_type() dereferences
hci_acl_hdr(skb)->handle whenever the HCI device has an active
CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of
uninitialized RX-buffer data. The same hazard exists for every
packet type the driver accepts because none of the switch cases in
virtbt_rx_handle() check skb->len against the per-type minimum HCI
header size before handing the frame to the core.
After stripping pkt_type, require skb->len to cover the fixed
header size for the selected type (event 2, ACL 4, SCO 3, ISO 4)
before calling hci_recv_frame(); drop ratelimited otherwise.
Unknown pkt_type values still take the original kfree_skb() default
path.
Use bt_dev_err_ratelimited() because both the length and pkt_type
values come from an untrusted backend that can otherwise flood the
kernel log. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: playstation: Clamp num_touch_reports
A device would never lie about the number of touch reports would it?
If it does the loop in dualshock4_parse_report will read off the end of
the touch_reports array, up to about 2 KiB for the maximum number of 256
loop iteraions. The data that is read is emitted via evdev if the
DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by
clamping the num_touch_reports value provided by the device to the
maximum size of the touch_reports array. |
| A flaw was found in the X.Org X server. This vulnerability, an out-of-bounds read, affects the XKB (X Keyboard Extension) modifier map handling. An attacker with access to the X11 server can exploit this by sending a malformed request, which causes the server to read beyond its intended memory boundaries. This can lead to the exposure of sensitive information or cause the server to crash, resulting in a denial of service. |
| When an Expat parser with a registered ElementDeclHandler parses an inline
document type definition containing a deeply nested content model a C stack
overflow occurs. |
| The msgpack decoder fails to properly validate the input buffer length when processing truncated fixext data (format codes 0xd4-0xd8). This can lead to an out-of-bounds read and a runtime panic, allowing a denial of service attack. |
| Inappropriate implementation in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High) |
